If you want to make your own egg beater at home, you must first prepare the tools, use a ruler to find the position above 1/4 of the bottom of the bottle, mark it with a marker, and use a hand knife to cut against the marked part. After cutting off the bottom of the bottle, use scissors to cut the bottle body into 1cm long strips, and press in every other long strip, so that the egg beater is ready. Step 1

Prepare tools: hand knife, scissors, ruler, marker, plastic bottle. Note that the plastic bottle must be harder. If the plastic material is too soft, it will not work. Stirring effect. Step 2

Find the 1/4 above the bottom of the plastic bottle. You can roughly estimate it or measure it with a ruler. After marking it, just draw a line with a marker. Step 3

Use a hand knife to cut the marked area, completely cut off the bottom of the bottle, and then use scissors to cut the remaining bottle into long strips with a width of about 1cm . Step 4

After cutting long strips from the plastic on the bottle, squeeze a strip into every other strip to ensure that the strips are all one Separate one stick so it can be used to beat egg whites.