The automatic oatmeal noodle machine consists of a frame, motor, reducer, screw jack, noodle barrel, mold and electrical control part. Model model /p>

Body size 1000×600×1300mm (length x width x height)

Weight 150 kg

Applicable cage hole number 22cm cage (85 holes) 24 cm (109 holes) 26 cm (121 holes)

Diameter of holes 19mm-25mm

Thickness of holes 1-1.5mm 1. Fast speed: output can reach thousands per hour Cage or above (equivalent to more than 200 times manual labor)

2. Low cost: less than 1 yuan per thousand cages

3. Good molding: the nest is extruded from the mold The appearance of the nest is neat, the walls are thin and smooth, and the food is delicious

4. Easy to operate: no technical content is required, and the elderly and women can operate it by one person

5. Save dough: the machine is automatic Kneading dough requires no manpower, either hot or cold water

6. High precision: the height error of the nest can be automatically controlled to 1 mm

7. No cutting required: no nest is required Manual cutting, the machine can automatically cut it

8. Adjustable: not only the height of the nest can be adjusted, but also the thickness of the nest can be adjusted

9. Less cleaning: the molding mold can be cleaned every half a year Once, save time and trouble

10. Wide use: the molding mold can be exchanged to produce other pasta models cm)

Body size 600x450x800mm (length x width x height)

Weight 70kg

(Other parameters are the same as the automatic oatmeal machine ) 1. Fast speed: the output can reach nearly a thousand cages per hour (equivalent to more than 150 times manual labor)

2. Low cost: no oil, no electricity, easy to use

3 . Good molding: The nests extruded from the mold have neat appearance, thin and smooth walls, and are delicious to eat. 1. The screw rod should be filled with thick engine oil regularly

2. The grease port of the reducer should be used regularly. Fill the grease gun with butter