Fire safety evaluation form template, evaluation is an intervention process and monitoring process, and the ultimate goal of evaluation is to understand the effectiveness of the work process. There are many evaluation methods, so it is very important to learn to write evaluation reports. The following is the sharing of fire safety assessment form templates.
Template of fire safety assessment form 1 Our company conducts fire safety assessment on XXXXXX () according to fire laws and regulations and fire technical standards. Take the principles of justice, fairness and openness, and the evaluation results are true and effective.
First, the general situation of the unit and the basic situation of fire safety:
XXXXXXXX is located in XXXXXXXX, Building X, the main building, with an area of X square meters and a building area of X square meters. The main building has X floors underground and X floors above ground. The building is equipped with indoor and outdoor fire hydrant systems, which automatically
Automatic sprinkler system, automatic fire alarm system, smoke control system. It passed the fire protection design audit of public security fire control institutions on, and passed the fire protection acceptance of public security fire control institutions on.
Pass the fire safety inspection before the opening of public security fire control institutions and put them into use.
Second, the evaluation content:
1, XXXXXX fire protection legal situation;
2, formulate and implement the fire safety system, fire safety operation procedures, fire fighting and emergency evacuation plan;
3. XXXXX fire safety administrator, full-time (part-time) fire administrator and automatic fire control system operator shall organize fire inspection, fire patrol and fire hazard rectification;
4.XXXXX employees' fire safety training, knowledge of "knowing three things at once", fire safety publicity, and organizing regular fire drills;
5, fire control facilities, equipment and fire safety signs configuration and good and effective situation, fire control room personnel on duty and automatic fire control system operators show certificates;
6, electrical products, gas appliances installation, use and wiring, pipeline laying and maintenance;
7. Clear the passage, exit and fire truck passage, and keep the fire partition, fire spacing, smoke partition, refuge floor (room) and fire truck climbing operation area effective;
8, indoor and outdoor decoration, the use of external wall insulation materials, management of inflammable and explosive dangerous goods;
9, according to the law to establish a full-time fire brigade and equipped with equipment, with fire fighting ability.
10, administrative punishment and bad fire safety behavior by fire control institutions of public security organs, and rectification of problems found in supervision and inspection;
165438+
12, the unit combined with the actual situation to strengthen civil air defense, physical defense, technical defense and other fire prevention measures;
13, fire situation in unit year.
Third, the existing problems:
1. Spot check employees' knowledge of "knowing one and knowing three", and some employees are unfamiliar with knowledge.
2. There are few emergency supplies for safe evacuation, and there are no flashlights and gas masks.
Four. Appraisal conclusion:
okay
Five, fire safety countermeasures, measures and suggestions:
1, strengthen staff publicity and education, and strengthen training for employees who are not familiar with knowledge.
2. Add flashlights, anti-virus and anti-smoke masks.
Fire safety assessment form template 2 I. Legality of fire safety
1. The buildings and places used by the unit shall conform to the technical standards for fire control and the regulations on supervision and management, and shall be accepted by the fire control institutions of public security organs according to law and obtain relevant legal certificates.
2 units belonging to public gathering places shall be inspected by the fire control institutions of public security organs and obtain relevant legal certificates before being put into use and business.
The fire safety inspection certificate before the public gathering place is put into use and business is hung at the front desk and other eye-catching positions. If it is not hung, it is defective.
3, the actual use of buildings or places should meet the requirements of the technical specification for fire protection, and fire acceptance, completion acceptance for the record, fire safety inspection before put into use, to determine the nature of use.
The office building has been accepted but changed to a hotel without authorization; The hotel passed the inspection before opening but changed into an entertainment place without authorization; Partial reconstruction and expansion are also not allowed.
Second, the fire safety system, fire safety operation procedures.
1, general provisions
Units shall, according to the actual production, use, management, storage and transportation, formulate relevant fire safety management systems and operating procedures, print or bind them into volumes, and revise them in time.
2, fire safety education and training system
Clearly include the responsible department, responsible person and responsibilities, frequency, training target (including special types of work and new employees), training form, training requirements, training content, assessment methods, etc.
3, fire inspection and inspection system
Clearly include the responsible department, responsible person and responsibility, inspection frequency, participants, inspection location, content and method, and establish a unified fire inspection form.
4, safety evacuation facilities management system
Clearly include the responsible department, responsible person and responsibility, safe evacuation location, facility inspection and management requirements, and keep records. Evacuation facilities such as exits and stairwells should be numbered uniformly, and corresponding ledgers should be established.
5, fire control (control room) duty system
Clearly including the scope and responsibilities, fire and fault handling procedures, reporting procedures, work handover, the number of people on duty and qualification requirements. , and establish and save the duty record.
6, fire control facilities, equipment maintenance management system
Clearly include the responsible department, responsible person and responsibilities, equipment registration, storage and maintenance management requirements, etc. , establish the maintenance management account of facilities and equipment, record and save it.
7, fire hazard rectification system
Clearly including the identification, handling, reporting and rectification monitoring process of fire hazards, rectification responsibilities and protective measures. , establish fire hazard registration and rectification records and save them.
8, fire, electricity safety management system
It clearly includes the responsible department, responsible person and responsibilities, facility registration, qualification of construction personnel, examination and approval procedures for power consumption, inspection parts and contents, inspection tools, protective measures, disposal procedures when problems are found, etc. , and establish and save the work record of examination and approval of power consumption, and implement personnel, monitoring measures and disposal measures according to the actual situation.
9, inflammable and explosive dangerous goods and places fire and explosion-proof system
Clearly including the responsible department, responsible person and responsibility, inflammable and explosive dangerous goods registration, fire or explosion.
Explosion hazards, accident handling procedures and measures, preventive measures, etc. , create a record and save it.
10, full-time and voluntary fire brigade organization and management system
Clearly including the organization, personnel composition and responsibilities, police dispatch, training methods, assessment methods, rewards and punishments, etc. , establish personnel registration account, equipment account and training records and save them.
1 1, fire fighting and emergency evacuation plan drill system
Clearly including the organization and division of labor, contact information, the formulation and revision of the plan, rescue and protection, exercise procedures, matters needing attention, exercise frequency, exercise records, improvement methods, etc. , and create a record and save it.
12, inspection and management system of gas and electrical equipment
Define the responsible department, responsible person and responsibilities, facility registration, inspection tools, inspection frequency, and handling procedures for problems found, and establish records and keep them.
13, fire safety work assessment and reward and punishment system
Clearly including the responsible department and responsible person, evaluation objectives, contents and methods, rewards and punishments, etc. , and create a record and save it.
14, other necessary fire safety systems
According to the actual situation, formulate other necessary fire safety systems.
15, fire safety operation procedures
1) Operating procedures for fire control facilities
According to the actual situation, formulate the operating rules of fire alarm system, automatic fire extinguishing system, emergency lighting system, smoke control facilities, fire extinguishers and other facilities and equipment.
2) Operating procedures related to fire safety
According to the actual situation of production and operation, formulate the operating rules related to fire safety such as welding, production, storage, transportation and use of inflammable and explosive dangerous goods.
According to the above systems and regulations, all fire risk units must be established, printed and bound, properly kept and hung on the wall. When checking and evaluating, we should pay attention to whether it is plagiarized or not, and whether it conforms to the actual situation of the unit.
Three, fire safety system, fire safety operation procedures to implement
1, person in charge of fire safety and manager, leading organization of fire control work.
1) The legal representative or principal responsible person of the unit is the person in charge of fire control safety of the unit and is fully responsible for the fire control work of the unit.
2) The unit shall designate the person in charge of 65,438+0 as the fire safety administrator to assist the person in charge of fire safety management of the unit.
3) Fire safety management personnel in crowded places and inflammable and explosive dangerous goods enterprises shall obtain the qualification of registered fire engineer in accordance with state regulations.
Regulations on Fire Safety Management of Fire Risk Units in Shandong Province (DecreeNo. 263rd of the provincial government).
Fire safety assessment form 1 template 3. In terms of operation and maintenance of radiation safety and protection facilities,
Our company's * line device can be regularly inspected and monitored by the Municipal Environmental Protection Bureau, and the inspection frequency is generally once a year, and the inspection results are filed by the company's security department; Our company's operators are responsible for daily maintenance and make handover records, and use * line devices to maintain safety devices.
As for the maintenance of the main line device, the electrician of the company is generally responsible for the maintenance of the conventional electrical circuit, and the faults in the fuselage are sent to the designated unit for maintenance. * In 2009, the line devices operated normally, and no equipment damage accident occurred.
Second, in terms of radiation safety and protection system and implementation.
Our company set up a leading group of "radiation protection management" headed by a legal representative, and at the same time formulated a strict radiation safety management system, and put this safety management on the agenda of the company's re-networking, so that the radiation protection management was controlled.
The company stipulates that all personnel engaged in radiation work should work in strict accordance with the "operating rules", and it is required to wear personal dosimeter for operation and do personal protection to ensure safety in production. Until 2009, there was no overexposure and exposure accident.
Three, in radiation accidents and emergencies.
According to the safety and protection regulations of mainline equipment, the company has taken various preventive measures. In view of the possible radiation accidents of the company, the company has formulated relevant radiation accidents and emergency network schemes to ensure the safety and security in parallel.
Fourth, in terms of file management.
Our company's approach is:
1. Establish the technical archives of X-ray equipment, formulate the use registration system, and indicate the parameters of X-ray technical archives in tabular form;
2. Establish a registration system for the use of * line equipment, record the account, and conduct registration inspection when using * line equipment to ensure that the accounts are consistent.
3. Supervise the users of * line equipment to fill in the use records and do not check them regularly;
4. Register the supervision and inspection of the environmental protection department every time, and file the environmental assessment report (including approval), monitoring report and other technical files of the environmental protection department.