Nowadays, the living room feels particularly depressed because of the low floor height, so many people don't choose to make a ceiling, and some people prefer a simple plaster line shape. So how can we install a light belt without a ceiling?

as we all know, the light strip is usually placed in the groove of the ceiling, because it is unsightly to expose the light strip directly outside, which is also one of the functions of the ceiling.

it's not nice to walk around the wall without ceiling lamp strips, and the power cord is also an open wire, which is also very laborious to clean. In this way, we need to find some decorative pieces to cover it, as long as the lights and lines are not exposed.

gypsum line is the most commonly used one for non-suspended ceiling. Go to the market and ask if there is one with a groove on it, which can be put into the light belt. The gypsum line should be kept at a good distance from the top, but the effect cannot be guaranteed.

There are many styles and novel designs in LED strip now, especially the installation is simple. If it can't be installed on it, consider installing light strips on the skirting line, and the effect is also very good.

of course, it can also be installed under the skirting line, and the light directly shines on the ground, which is very high-grade and easy to repair. However, some efforts should be made in the selection of skirting line and the installation of light belt.

and there are some things you should pay attention to when choosing the light strip.

1. When you choose the light strip, be sure to determine the length you want to use, and then pay attention to it when you buy it. You should take an integer to intercept it. If it will not destroy its power supply, it will also affect the circuit, so you must not cut it at will, or it will cause the light strip not to light up.

2. Link plug: LED strip also has a plug, which is driven by direct current, and also has positive and negative poles. If the positive and negative poles are connected reversely when wiring, the light strip will not light up.

3. Placement of light strips: Generally, light strips are packaged in trays, so the light strips that have just been disassembled will have some distortion. When you install them, you must flatten them before putting them into the light trough.