Abstract: Lightbox billboard is a special signboard and a new form of store facade decoration, which has many characteristics such as large screen, strong farsightedness and wide content, and is widely used. Light box signs are generally installed outdoors, such as roads, streets, cinemas (theaters), exhibitions (sales meetings), commercial downtown areas, stations, and indoors. When installing, you must first determine the installation position, then measure the size, fix the light box, wire it, and adjust it to be electrified. When installing, you should pay attention to the large light box signs with supporting structures and cooling holes on the sides. Let's take a look at how to install the light box billboard. 1. where is the light box signboard installed?

The light box signboard, also known as the light box billboard, is made of plexiglass and is mainly used to display advertisements in the glass. So where should the light box signboard be installed?

Generally speaking, light boxes and billboards are mainly installed outdoors, and they are suitable for roads, streets, cinemas (theaters), exhibitions (sales), commercial downtown areas, stations, airports, docks and parks. In addition, with the development of ultra-thin, quiet and environmentally friendly light box billboards, small ultra-thin light box can also be used indoors, including some large supermarkets, hypermarkets, banks, beauty salons, buildings, etc., and the advertising effect is very good.

Second, how to install the light box signboard

The light box signboard is a good billboard with good advertising effect, but the installation of the light box signboard will be more troublesome than that of ordinary billboards. Here are the installation methods for everyone:

1. Determine the installation location

First, determine the installation location of the light box signboard, and determine the installation method according to the actual situation and the type of light box.

2. Measuring size

Determine the fixing point for installing the light box according to the position of the mounting hole on the back of the light box or the actual size on site.

3. Fixing the light box

Different methods are selected according to different walls: aluminum-plastic board, wood board and iron plate can be directly fixed with self-tapping screws; Cement or brick walls need to be punched with an impact drill first, and then fixed with expansion screws; For ceramic tile, marble, glass and other walls, it is necessary to drill holes on the surface with a glass drill, then drill out the expansion screw holes, and then fix the light box or use glue; Some light boxes are hung or hoisted. After selecting the installation position, determine the fixing point for installing the light box according to the actual size of the installation hole of the light box, and then install the pendant and connect the ground wire.

4. Wiring

When the outlet end of the power cord of an ordinary light box is at the back and the power supply is located at the back of the light box, cut off the plug of the power cord, connect it directly, and fix the power connector with insulating tape. If the power supply is installed outside the light box, the outlet of the light box power supply can be connected to the edge of the light box, and then the three-phase plug can be inserted into the provided power socket.

5. Adjust the light box

Open the upper cover of the light box, drill the power cord on the base of the light box with an electric drill, reinstall the power cord, and adjust it horizontally and horizontally so that it can be installed at a fixed point.

6. Turn on the power

Clean the billboard surface of the light box and turn on the power to use it.

3. Precautions for installation of light box signboard

1. When the light box signboard is large in size, it needs a supporting structure inside.

2. If the billboard of light box is made of acrylic board, it is best not to fix it with screws, but to use special adhesive or embed the board to fix it.

3. There should be cooling holes on the side of the light box.

4. When installing the light box billboard, try to choose a better way to install and dismantle it, so as not to cause trouble in the later period.