The range hood has become a must-have kitchen and bathroom appliance for families, and everyone may use it every day when they go to the kitchen. The installation of the range hood is also very particular. Let's take a look at the specific operation of this netizen's range hood installation.

arrival of the range hood

The top of the range hood

The professional picture of the installation master shows drilling the positioning hole

Note: 1. Installation environment: Too many doors and windows should be avoided around the installation position of the range hood, and the air convection is too large, so that the oil fume will spread before it rises to the effective attraction range of 25cm away from the range hood, and the smoke exhaust effect of the range hood cannot be fully exerted.

installation height: according to the installation requirements, the top suction range hood should be installed between 651 and 711 mm directly above the cooker, and the near suction range should be installed between 211 and 311 mm directly above the cooker. The specific installation height depends on the structure of the kitchen and the height of the user.

link: recommended range hood products with high quality and low price

wall drilling

screw fixation

installed effect

Note: 2. Exhaust duct requirements:

A: The distance from the outlet of the exhaust duct to the machine body should not be too long, and the turning radius should be as large as possible and few turns should be made, so as to keep the oil smoke flow smooth and avoid affecting the smoke exhaust effect.

B: the exhaust duct extends out of the door or passes through the cold air suction flue, and the joint should be tight, and it is not allowed to discharge the exhaust gas into the hot pipeline.

installing the smoke pipe

note: 3. levelness requirements of the machine body: after installing the machine body, observe its levelness to avoid the oil pan leaning to one side and overflowing the machine when in use. (The left and right level of the body can be adjusted by the hook; Before and after the level, can be adjusted by the depth of the steel nail into the wall)