How to disassemble and clean the potato residue slurry separator

The specific steps are as follows:

1. Turn off the power and put the equipment on a stable workbench.

2. Open the back cover or side cover of the equipment and find the position of the motor and transmission shaft.

3. Remove the drive shaft from the motor and pay attention to the connection mode of the drive shaft, which may require special tools.

4. Put the removed transmission shaft on a clean workbench and clean it with a brush and detergent.

5. Clean the motor in the same way, and be careful not to let water or detergent enter the motor.

6. After cleaning, reinstall the drive shaft on the motor and ensure the connection is firm.

7. Close the back cover or side cover of the equipment and turn on the power supply to test whether the equipment works normally.