At present, there are several methods to make bamboo stick incense: 1. Traditional craft hand spray incense. 2. Hand grinding and mechanical barrel beating. 3. Pressure (hydraulic, pneumatic) machines go on strike. Using the first and second methods to produce products below 4 mm, the grain output is generally higher than that of the third method, and the labor intensity of the first method is the highest. The bamboo stick incense produced by the third method is more uniform, smooth and uniform in size as long as the ingredients are appropriate. The first method and the second method have higher technical requirements for workers, and each factory has its own unique skills in producing bamboo stick incense, but I think the following points need attention (not necessarily correct, I hope experts in the same industry can give me some advice) 1. Reasonable ingredients should be made according to the characteristics of using different sticky powders, because the gums and properties of different sticky powders are different, and the same sticky powder is different in different places and batches. If you use the same ratio, there will be problems sometimes. Such as easy to stick together, rotten head, rotten feet, rotten meat and so on. When making incense, the greater the viscosity of sticky powder, the better. The ingredients should be stirred evenly. Although some masters can make each incense eat even powder by experience, if they don't master it well, it is easy to cause the places with more wood powder to melt in the water, and the places with more sticky powder to stick together, which will make the incense uneven and uneven. 2. Grasp the base powder, add meat powder and cover with flour. The adhesion of base powder should be the strongest, followed by meat powder, and the cover powder is slightly weaker. If the adhesion of meat powder is stronger than that of base powder, it is easy to rot, and the cohesiveness of cover powder is not enough, so it is easy to remove powder. 3. Selection of bamboo core. Traditionally, it takes one bamboo, two materials and three efforts to make bamboo stick incense. It's best to choose a bamboo stick with even size, no bamboo green and disgusting bags, and a bamboo stick with bamboo green. The bamboo green side is not easy to powder, and the adhesion is poor, which is easy to rot and insects. 4. Draft control: the whole bamboo stick and incense should have a uniform draft when entering the water tray. After leaving the water tray, stand upside down and let the water flow back evenly before powdering to avoid big head, rat tail and big belly. 5. Selection of masking powder: The masking powder should have enough fineness, so it is easy to make the fragrance smooth. If it is used for color fragrance, balsa wood powder or bamboo powder should be used, so that the color is brighter and brighter, and it should be sieved after adjustment. Ingredients: wood flour: 60- 100 mesh, no odor. There are ready-made products in the market, and the price is 300-800 yuan (ton). Wood tips, bamboo tips, pine leaves, wood seed shells, peanut shells, straws and pine nut shells in sawmills can also be collected and crushed into powder, which is a good raw material for making incense. Sticky powder: Sticky powder made from skins, branches, leaves and roots of natural trees. It will stick when it meets water, and it will be in the form of glue. The silk thread is very sticky and can be processed with all kinds of wood flour. Such as: water chestnut bark powder, white rubber powder, Indian red gum, runnan shavings, runnan shavings, sassafras, rubber trees, stone fruit trees, Cinnamomum camphora, runnan, rubber branch powder, sticky firewood, stone powder, etc. Different places have different names, such as Guangxi sticky, Fujian mountain pipa, Guangdong Mianhua stone, northern elm powder and so on. Different prices have different prices, so the prices are also different. Generally, they are 1, and 200 yuan is more than one ton. Bamboo stick (small bamboo stick incense): there are two kinds of square core and round core, and the specifications range from 0.8 to 3.0. The price starts from 2000 yuan, and the smaller the diameter, the higher the price. Value-added materials: If you want to make high-grade perfume and increase the appearance and smell of perfume, you can add the following materials: Pigment material is to add different colors to perfume, such as red, rose essence, light yellow, basic orange, magenta and gold powder. Flavors and spices can be added with osmanthus fragrans, fragrant incense, Tibetan tribute, natural sandalwood oil, cherry blossoms, magnolia, flowers, rose rolls, jasmine, Indian nanmu, sandalwood and other flavors or spices according to customer requirements.