Installation skills of sanitary ware 1. Installation skills of toilet. When installing the toilet, remember that the standard distance between the pit and the wall is 411 mm. If it is too large, it will waste the position. If it is too small, it is necessary to consider whether the toilet can be installed in a square way.

check the sewer pipe on the ground-align it with the nozzle-level and align it-draw marks-punch holes-daub putty-put on rubber pads-screw on nuts-draw marks on the two side holes on the back of the water tank-punch holes-insert bolts-twist firmly-hang the back water tank level and align it-screw on nuts-install the water elbow of the back water tank-install the door-insert the drift door and the door-tighten the nuts.

2. Installation skills of the washbasin. Most washbasins are connected with two water pipes. According to the indoor decoration inspection standard, the one on the left side of the faucet is a hot water pipe and the one on the right side is a cold water pipe. Don't be mistaken when connecting.

the opening distance and position of the washbasin should be defined according to the design drawings and the description of the faucet.

insert the expansion bolt-twist it firmly-hang the basin pipe rack-put the washbasin on the rack for leveling-connect it with water: washbasin-straighten it-connect it with water.

3. Installation skills of bathtubs There are many kinds of bathtubs. If they are ordinary bathtubs, there are pipe drainage at the bottom. When preventing bathtubs, try to use long-lived drainage pipes at the bottom of the pipes, and pay attention to the slope.

if it's a steam bathtub, there are motors, pumps and other equipment at the bottom, so it's best to reserve a maintenance hole when decorating.

the decoration is beautiful.

national owners' decoration exchange group

51111.111111111515