many owners will entrust the house decoration to the decoration company because of their busy work and other reasons. After the house is renovated, the owner usually checks and accepts the house. What are the procedures for checking and accepting the house decoration? Next, Xiaobian will simply introduce it to you.

1. After the house is decorated, we need to check and accept the house decoration. When accepting the house, it is necessary to check the wall surface first to see whether the appearance color of the wall surface is uniform, touch the wall surface by hand to check whether the wall surface is flat, and besides, it is necessary to check whether there is water seepage, cracks and hollowing on the wall surface. You can check the verticality and levelness of the wall with the inspection ruler. The allowable deviation of the brick surface is 2 mm generally.

2. Next, we need to check the ground. The floor is easy to scratch the surface due to improper construction, so we need to carefully check whether there are color differences, gaps, cracks, hollowing and other conditions on the ground, and whether there are pollutants such as paint on the ground. In addition, we also need to check the floor flatness, and the allowable error of floor flatness is 5 mm after paving the floor tiles. When checking the bathroom and balcony floor, we also need to pay attention to the slope of the floor. We can put the table tennis ball near the floor drain to see if it will roll in the direction of the floor drain.

3. Next, we need to check the water and electricity works of the house. The owner can check whether the installation position of water and electricity is correct with the design drawings and water and electricity layout drawings. And check whether the valves, faucets, switches, sockets, etc. are firmly installed, flexible in use, normal in operation and damaged on their surfaces. You also need to check whether the floor drain and drain are draining normally, and whether the indoor water pressure and voltage are normal.

4. Finally, we need to check the doors and windows, cabinets, gas stoves, water heaters and other equipment of the house. Check whether the installation is firm, whether it is flexible and convenient, whether there is pungent smell in wooden doors and cabinets, whether there is air leakage in rubber nozzles of gas stoves, whether the water heater is normal, etc.

xiaobian summary: what are the decoration acceptance processes? xiaobian simply introduces them here. I hope that after reading this article, everyone can understand the acceptance process after the house decoration is completed. Everyone tries to check and accept each project after the decoration is completed.