As a result, the kitchen fume is not handled well, and various faults will occur in the work. So what's the solution? Let's analyze it together. The motor of cooking fume purifier in catering kitchen has serious fever: the stator winding is partially short-circuited; There is a serious shortage of oil, so it should be cleaned and maintained in time to restore the purification effect. The key switch of the lampblack purifier is not working: the torque of the motor decreases and the speed slows down, so the capacitor of the same specification should be replaced.
Short-circuited windings should be repaired or replaced. Solution to poor lubrication and fever of kitchen lampblack purifier: proper amount of oil. If the bearing is damaged, replace the bearing: the key switch of each gear can be locked. The mechanical performance is good, but the motor cannot be started. Check whether the male * * * connection of each switch is open, and repair it if it is open; If the motor can't run when one of the gears is pressed, and the other gears are normal, check whether there is any contact damage or disconnection in the out-of-control gear; Press the switch motor to run, and it cannot be locked after being released.
Check whether the conductive spring of the unlocking switch can't touch the conductive sheet, or whether the switch spring sheet falls off or shifts. Adjust the spring leaf or replace the switch; Both gears are locked at the same time. Check whether the interlock spring is displaced or deformed. If so, adjust and repair the interlock spring. Oil leakage of electrostatic fume purifier: improper installation and insufficient elevation angle. Reinstall, so that the sucked oil can flow into the oil collecting box smoothly; The oil drain pipe falls off or is damaged, and the sealing strip of the oil collecting box is damaged.