There are some factors that can easily affect the sweetness oil-degrading bacteria in sewage treatment. For example, a large amount of oil will be secreted in the reproduction process of restaurants or soybeans. As the water flows into the sewage treatment process, the grease trap in the process system can isolate the agglomerated oil, but the oil suspended in the water will enter the biochemical pool with the water flow. Thereby affecting the biochemical system. Today, Shanghai Gandu Xiaobian will briefly introduce how to use oil-decomposing bacteria.

dissolution and stirring of gandewe-lipa:

put gandewe-lipa oil-decomposing bacteria into the bucket in a previously prepared 11L bucket, then take the sewage from the oxygen pool and put it into the bucket for dissolution, and stir it into a liquid state. So that the strains can be fully and evenly mixed with sewage.

gandewe-lipa is put into the aerobic tank:

keep the normal equipment control of the aerobic tank, and then put the mixed liquid of bacteria and sewage which was dissolved and mixed before into the water inlet of the aerobic tank.

respectively adding C, N and P nutrient sources:

Dissolve the previously prepared amounts of carbon source, nitrogen source and phosphorus source, and then add them to the water inlet end of the aerobic tank, and the relevant settings of the aerobic tank will remain normal.

index requirements for adding aerobic tank:

dissolved oxygen, temperature and PH value: dissolved oxygen, PH and temperature control: dissolved oxygen in aerobic tank should be between 2 mg/L and 4 mg/L, pH value should be controlled between 7.1 and 8.1, water temperature should be controlled between 13 C and 38 C, and the optimal operating temperature is 25 C-.