.

You don't need to burn it, you can install it through a USB flash drive or hard disk.

★ The methods and steps for installing or reinstalling the GHOST operating system are as follows:

.

1, optical drive reinstallation: put the system CD into the optical drive and restart the computer. Enter the installation system screen and start the installation.

2.★ The method of installing the GHOST operating system with a USB flash drive is as follows:

Note: You can choose this method when your computer has no optical drive or the optical drive is broken. )

Step 1: Download and install ultraiso software, and download xp system or win7 system.

Step 2: Open the ultraiso floppy disk. File-> Open it and find the ISO format system you downloaded.

Step 3: Find "Boot CD- >" on the ultraiso menu. Write to the hard disk image ".

Step 4: ultraiso will pop up the "Write Hard Disk Image Dialog Box" and select USB-ZIP mode.

Step 5: ultraiso will write the system to your USB flash drive.

Step 6: Start the USB flash drive to enter the BIOS and set the USB flash drive as the first startup item. Restart, start the computer with USB flash drive and install the system.

(If you want to install other systems, you can put the downloaded system installation image into a USB flash drive or other partition of the computer. )

3. One-click GHOST: backup and restore the system under DOS system. (Note: This method does not need to download the ghost image installation file, but only needs to have a system backup in your computer when the system is in good condition. )

4. CD-ROM drive-free and USB flash drive-free reloading systems:

Step 1: Select the system you need.

Step 2, download the system.

Step 3: Restore the system: find the One Key Ghost file and double-click to run. Then according to the prompt, restore the image file to drive C. At this time, your computer will automatically restart and automatically enter the Ghost installation interface. At present, most Ghsot is humanized and installed automatically and quickly. Even off-line automatic installation is very simple, which brings a lot of convenience to some novice computers who can't install the system, and there is no need to allocate hard disks. You can quickly return a clean system (it is best to log off when you enter the new system for the first time).

5. Generally, only a few steps are needed to reinstall the system: data backup, system installation, driver software installation and data recovery. This function adopts wizard operation, and guides users to reinstall the system step by step through dialogue and explanation. Novices only need to follow the prompts, and they can easily reinstall the system without bothering others. There is no need for complicated preliminary preparation such as USB flash drive, CD-ROM drive, system file image, etc.

6. Hard disk installation method: First download the XP or Win7 system image file to be installed, and then decompress the downloaded file to a non-system disk. Then, click autorun.exe and select "Install the system to drive C with one click". Next, the automatic installation process will take about 5 minutes.

If it helps you, please click the button below my answer and choose the satisfactory answer. If it is adopted in time, it will restore 5 wealth values.