●Networked control with CAN bus communication
●Motion structure with 3 degrees of freedom to swing at will
●Super quiet platform with the lowest noise level at present
1.2 4D Environmental Effects
●Can simulate all kinds of weather scenarios
●Windy, snowy, lightening, bubbles, smoke, rain, etc.
1.3 4D Seat Effects
●All the effects on the market, such as air jets, water jets, ear winds, back stabbing, vibrations, leg sweeps, etc.
1.4 Motion Encoding (Makuvi 4D provides synchronized premiere motion codes)
●Motion is encoded frame by frame without loss of detail
●The film's time, running motion, and camera frame rate (the number of frames) are encoded into a single code, which is a combination of the film's time, running motion, and camera frame rate. Running action, the film machine frame (24 frames / second) completely synchronized editing 2, motion platform introduction
up and down jitter
front and back tilt
left and right tilt
with accurate electric servo control of the crankshaft structure of the operation, to achieve a full range of motion of the seating platform can be achieved in a rapid point of the jitter, to achieve the front and rear of the seating platform tilted, and can also be achieved in a rapid surge, realize the seat platform left and right tilt, and can do slow flight.
3, the introduction of special effects
The curtain-dimensional 4D motion seat has a lot of environmental effects and seat function effects, can easily put the audience in the film environment, enjoy the most realistic viewing effect.
4, seat parameters
Seat weight: 260KG (weight of a group of four);
Seat size: length 2340mm, width 970mm, height 1280mm;
Seat pitch: 560mm;
Motion data: crankshaft stroke of 90mm, forward and backward tilt ± 15 °, tilt ± 5 °, shaking tilt ± 5 °, jitter frequency 0-24Hz;
Seat can be loaded: 600KG;
4, construction service process
Two, 4D product features
1, networked control
Makuwei 4D seat using Ethernet + CAN bus control, CAN bus was originally developed by BOSCH Germany to solve the problem of numerous controllers and measuring devices in the car. CAN bus was originally developed by BOSCH of Germany to solve the problem of data exchange between the many controllers and measuring devices in the car and a serial data communication bus, CAN bus has a high reliability, fast transmission speed, long communication distance, easy to use, maintenance and network expansion characteristics, our 4D using CAN bus control 4D seat movement, seat effects and environmental effects, to ensure that the theater for a long time to ensure stable operation, and long-term in a technical The 4D is in a leading position in technology for a long period of time.
2, composite vibration
Low-frequency vibrator (backrest and seat cushion each one)
Vibration frequency 20-80Hz
+
Platform mechanical vibration (vibration through the crankshaft)
Vibration frequency of 0-12Hz basically realizes the human body can sense the full band vibration frequency, so that the 4D seat easily simulate the 4D seat from the sky to the sky. Simulate the change from the heavenly collapse to the delicate change.
3, ultra-quiet platform
Maku Wei 4D seat crankshaft structure of the platform structure of the smallest noise, the biggest feature is not with the increase in load and increase the noise, will not be due to the prolonged operation of the noise, suitable for long-time use of the theater.
4, fully synchronized
Seat movement, seat effects and environmental effects are fully synchronized with the film, and the motion code is calibrated 24 times per second with the camera time. The motion seat will recognize the progress of the movie through the time code of the movie when it is in motion, so that the time code of the motion and the time code of the movie will be proofread.
5. Frame-by-frame encoding
Frame-by-frame encoding of the editing method that is fully synchronized with the frame rate of the camera (24 fps) will not result in the loss of details of the action, such as 24 fps or 30 fps of the film can also be done for each frame encoding.
6, two-fluid nozzle
Can be realized individually spray water, individually spray air, through the film code to control the duration of the water spray and air spray, adjust the size of the spray and the degree of atomization in order to adapt to the film of different scenes. This design drives the water droplets to spray through the airflow, and the water droplets will be dispersed when spraying, so that the audience will not get the glasses wet when wearing 3D glasses, and their faces will feel the coolness of the water mist.
At the same time, each water spray effect can be adjusted to spray angle, to ensure that the seat in the case of different step height can be sprayed to the audience can perceive the area.
7, crankshaft motion structure
The crankshaft structure is the most stable motion platform structure in the current market, which simulates the structure of automobile engine, and can achieve zero wear and tear, zero noise, and 360-degree operation without dead angle.
8, the easiest way to operate
Software interface is simple, the software for my company's technical executives by a full range of analysis designed by the interface requirements of simple and clear, easy to understand the function. The software is easy to use, the principle of learning will be for the theater party to focus on consideration, so that each projector a little on the understanding, a learning will be. After the software is set up once, it will be played again in the future, and you only need to open the software, without any operation, and play the film directly in the projector to realize the fully synchronized full-automatic playback.
Three, seat materials and services
1, seat material introduction
completely ergonomic;
fabrics are made of microfiber leather (waterproof, wear-resistant);
backrests, cushions, armrests, platforms are connected by an all-steel skeleton;
Backrests and cushions are high-quality high-resilience urethane acid foam material, foam Density ≥ 45kg / ㎡;
Back sit are inlaid "S" spring, increase seat comfort;
Equipped with a safety belt, footrest and the bottom of the three protective cover;
Footrest beautiful and sturdy, bearing 200KG no bending invisible change, rounded edges to avoid the legs bump.
2, qualification certificates
Patent certificate
Makuhari 4D seat production, with independent intellectual property rights of the motorized crankshaft structure of the patent certificate
Software copyright
Makuhari 4D seat shadow seat control and playback software for the use of independent intellectual property rights of the software
Tsinghua University, noise, acoustic testing
Our company produces 4D chair, the seat control and playback software
Noise, sound absorption test
The 4D seats produced by our company have passed the noise and sound absorption test at Tsinghua University
High resilience sponge test report
Makuwei 4D seats are all made of high resilience sponges and have passed the national test
3. Load test
Makuwei 4D cinema 4D equipment used in 4D equipment with a crankshaft structure to carry out a long term test of the 600kg load bearing, and the equipment has already passed the 6-month daytime and nighttime test. The equipment has been running around the clock for 6 months, for a group of 4 people 4D seats, equivalent to each seat can carry nearly 150KG weight. Through the long-term 24-hour non-stop operation of the data obtained by the projection, our production of 4D seats can ensure the smooth operation of the theater for more than 5 years.
4, quality assurance
Electronics warranty 1 year, the seat inside the servo motor, photoelectric switch, solenoid valve and other electronic products and the server room inside the room, special effects controller and other electronic components, our company to provide 2 sides of the free warranty, lifelong maintenance, after warranty, only charge the cost of spare parts.
Sponge, fabric, plastic warranty 2 years, for the seat of the sponge part, fabric part, plastic material part, our company provides 2 sides of the free warranty, lifelong maintenance, after the warranty only charge spare parts cost.
Crankshaft motion structure warranty 5 years, the crankshaft motion structure for the core of the seat's movement, this joint bearing we provide 5 years free warranty, to ensure that the seat in the theater for a long time to run smoothly.
Platform and seat within the steel structure warranty of 5 years, our production of 4D seats, the platform part of the thick-walled tube welded together, the seat inside all the steel skeleton + curved spring structure, the seat of all the steel materials we provide 5 years free warranty to ensure that the overall structure of the long-term efficient operation.
5, after-sales maintenance
Mid-year, end of the year overhaul, the warranty period of the seat, we are responsible for the door-to-door maintenance twice a year, to ensure the safe and smooth operation of the theater equipment.
24-hour telephone support, the theater malfunction we provide 24-hour telephone support.
48 hours of engineers to the door, in the theater malfunction, such as telephone communication can not be ended within 48 hours of our engineers sent to the theater site to solve the problem.
Seat model display
Huami - X
Huami - F
XJ-01
Mirage F1