Compactor is a kind of pressurizing equipment before pressing all kinds of powdery materials into balls to prevent the balls from failing to meet the requirements. Note: Not all materials are granulated by compaction equipment. Scope of application of compactor: the material is fine, reaching more than 200 meshes, and the water content is high. Available raw materials are: phosphogypsum powder, desulfurization gypsum powder, gypsum powder and other materials.

The compactor compresses phosphor gypsum powder, desulfurized gypsum powder, gypsum powder and other materials, and first removes part of the water to make them into strips, so that the ball press has better strength during extrusion and achieves the best effect.

Requirements of compactors for molding materials;

1, and the particle size of the material is above 200 meshes.

2. Metal objects are not allowed in the material. Otherwise, the surface of the roll skin will be damaged.

3, the material moisture should be large.

On the surface, the cost of multiple sets of equipment in the production line will increase, so the analysis of the problem should be observed from the essence, not just from the surface. When buying a ball compactor, it is unnecessary to buy some equipment recommended by the manufacturer. For example, the use of ball machine is double-sided to the price fluctuation of ball machine, which can be used as supporting equipment for desulfurization gypsum ball machine and phosphogypsum ball machine. Because of the high viscosity of desulfurized gypsum, it needs to be compacted by a ball press to achieve a high balling rate. From the perspective of long-term planning, buying a ball press is an effective investment cost and can bring good profits, so for the ball press.