Generally speaking, glass doors are transparent, so we will find that some consumers and friends of users will bump into the glass doors due to negligence, which will lead to unnecessary security threats. Accordingly, we should do a good job in the early stage, including choosing the glass door stickers mentioned below, which contain a variety of colors and patterns for everyone to choose from. In addition, interested friends can also refer to the manufacturers for personalized customization. For example, it is a good suggestion to customize a glass door sticker with their own organization name and slogan.

1. Glass door sticker price

1. Price:? 38.11/ set

Funlife kaleidoscope glass door sticker? Bathroom door renovation creative self-adhesive decoration? Waterproof door sticker DM115

Manufacturer: Shanghai Gaodi Network Technology Co., Ltd.

2. Price:? 1.12/PCS

customization? Advertising push-pull stickers? PVC sliding door stickers, advertising electrostatic stickers? Glass door stickers? Push-pull sticker manufacturer

Manufacturer: Cangnan Feixiang Color Printing Factory

3. Price:? 4.21 sets of

factory outlets? New XL831 Christmas tree window glass door decorative wall stickers for Christmas holidays

Manufacturer: Yiwu Fanxi E-commerce Co., Ltd.

Price source network, for reference only

Second, how to paste the glass door film

1. Be familiar with the tools and measure the size

Construction points: check that the tools are intact and measure the size from the same side of the window;

The tools we have prepared before sticking the film should include at least four pieces: scraper, watering can, art knife and ruler, and carefully check whether the tools are flat, smooth and have gaps; Then we measure the length and width of the window. When measuring the window size, we must start from the same side of the window.

2. Film cutting

Key points of construction: pad with soft cloth, align the film edge with the center line, and the size is 5-8mm smaller than the glass;

after taking out the film to check the size and quantity of the film, put a small blanket or soft cloth under it to avoid scratching the floor; When cutting, align the edge of the film with the center line, and cut it. The cut size is 5-8mm smaller than the glass size, and the film is coated on the back.

3. Cleaning the glass

Key points of construction: spray water for several times, clean it without lint, dust and sand;

the glass must be cleaned, which is very important to the film pasting effect. The glass should be thoroughly cleaned. Spray more water, scrape with film several times to make the glass free of lint, dust and sand, and then spray a layer of water after cleaning the glass.

4. Coating

Key points of construction: spray lubricant to reduce the viscosity of the adhesive layer, cross first, scrape the film in the middle first and then on both sides;

the film is divided into two layers, one is colorless and transparent and the other is sticky and colored. Before coating, spray lubricating liquid to reduce the viscosity of the adhesive layer, then apply the film while tearing the protective film, and adjust the position of the film on the glass window. The action is to cross the film first, then scrape the film from the middle to the two sides, fix the film, and drive out the bubbles from both sides, with light force to avoid scratching the film with excessive force.

5. Scraping film to catch water

Key points of construction: small towel absorbs water, trims corners and wipes with dry rag;

spray lubricant on the film, separate the protective film from the film, and move in the same direction as in the previous step, vigorously scrape off the water, use a small towel to absorb the scraped water, and finally trim the corners where it is not scraped, tear off the protective film, and finish the film pasting. When all windows are covered with film, spray a small amount of detergent to remove other residues. Wipe with a dry rag to make the window smooth and bright.

Although the glass door sticker looks no different from the ordinary sticker, it has many advantages and functions because it is attached to the glass door. For example, on the one hand, it can prevent some consumers and friends from bumping into the glass door or window due to negligence. On the other hand, the choice of patterns and styles of the glass door sticker is also rich. We can also seek professional manufacturers to customize it according to our own needs. For example, we can harvest a unique sticker by referring to the slogan and logo of our own organization to play an advertisement.