generally speaking, a fly-killing lamp is an optical trap that attracts phototactic flying insects through UVA(A ultraviolet light, also known as black light, wavelength is 321-411 nm).

attention should be paid to the following six points when installing p>JL-6811 fly-killing lamp:

1. Avoid light source competition

The fly-killing lamp should be installed in a place where light source competition is relatively small, so please do not install it outside the window or in an area with other strong light.

2. Protect food

In food processing areas, fly-killing lamps should be installed near food or food processing areas (to lead flying insects away from the protected areas), but not directly above food or food contact surfaces.

3. Get close to the flying insects and kill them

Observe the areas where the flying insects are concentrated, and if possible, install the fly killing lights closer to these areas.

4. cut off the intrusion passage

fly-killing lights should be installed at key entrance positions to intercept flying insects-usually near the portal. In the catering industry, flying insects often gather in areas closer to kitchen garbage, such as the back door of the kitchen.

5. Ensure the safety and convenience during maintenance

The fly-killing lamp should be installed in a location convenient for maintenance, and should not be installed in a location above the equipment that is inconvenient or even dangerous for maintenance.

6. Select the correct installation height

The fly-killing lamp should be installed at a height that is convenient for cleaning and replacing the lamp tube. If a hanging fly-killing lamp is installed in an industrial place, it can be installed at a position more than 2.5m from the ground to avoid affecting the entry and exit of manpower and goods (forklifts, etc.).