Do you have a wooden antistatic floor?
1, let's popularize what is anti-static floor. The so-called anti-static floor is the overhead space formed between it and the grass-roots floor or floor. Technically, it refers to the overhead floor connected by brackets and beams, which can not only meet the needs of laying criss-crossing cables and various pipelines, but also meet the requirements of air conditioning such as static pressure air supply through design. There are many kinds of anti-static floor materials, including wood, which are called composite board base, particleboard base and wood base in the industry.
2. The structure of the composite anti-static floor is exactly the same as that of the calcium sulfate anti-static floor, except that the core material of the composite anti-static floor is composite particleboard, and the composite core material is a high-density board made by crushing wood and adding inert bonding materials, which has the characteristics of flame retardancy, moisture resistance and noise reduction and has good bearing capacity. Because of its good environmental protection and economy, it is widely used in computer rooms, businesses, museums and other fields, and is an ideal overhead floor material.
3. From the technical point of view of the industry, the anti-static wooden floor adopts high-density board as the base material, and the manufacturer sticks fire-proof boards (HPL/PVC/ ceramics) on the surface technology, galvanized steel plates and PVC edges on the bottom, particleboard as the base material, and anti-static veneers, aluminum plates and aluminum alloys on the top and bottom, which have good anti-static performance. Imitation imported wooden anti-static floor is manufactured and processed according to imported floor, which has beautiful appearance and excellent performance, and is suitable for all kinds of computer rooms, but the cost is high.
Construction technology of anti-static floor
1, anti-static floor construction should first clean up the base, and then find out the highest and lowest points of the room through instruments, and calculate the average value from the ground to the board surface. Choose an angle as a starting point, find a good elevation on the wall, and draw two parallel wax lines 595mm away from the wall according to the height required by the elevation of the wall.
2. After the parallel lines are pulled, tighten the four brackets. Determine the height, lay the first board, be sure to tighten the fixing screws between the beam and the bracket, then adjust the board with a level and lock the nuts on the bracket. After the first block is leveled, two rows of floors are laid vertically along the wax line. Note: Black rubber edges must be aligned and between plates.
3. After the vertical two rows of floors are laid, find a direction and lay them in parallel row by row until the end. Then you have to fix the angle iron in the corner first, and then cut around the floor. Note: the level of the angle iron must be consistent with the level of the installed floor, and the back of the angle iron must be supported (wood square support or triangular iron support).
4. After fixing the angle iron, carefully cut the small floor area, and then cut the floor for laying. If it is necessary to install a ground socket, use a cutting machine to punch holes according to the actual size. At the wall, door frame and column, cut the motherboard with a chainsaw according to the actual size, or install appropriate wrapping parts. The door is sealed with stainless steel or angle aluminum, and fixed with glass glue or pull nails.
Anti-static floor is not widely used in life, especially in the family. However, with the development of science and technology in recent years and the enrichment of public personal interests, some people will set up various special rooms and studios at home, thus using anti-static floors in decoration. Is there a wooden anti-static floor on it and the introduction of anti-static floor construction technology may be useful to everyone.