Everyone knows that there will be decorated soot in the kitchen, but stubborn? Soot will make many housewives bigger. So how to skillfully clean the kitchen flue gas pipe to save the kitchen, and what are the precautions when installing the kitchen flue gas pipe? Let's take a look at the specific problems of Tuba Rabbit Xiaobian.

smoke pipe cleaning strategy and installation process selection

If the kitchen smoke pipe is not cleaned in time, it will cause oil fume and smoke in the hood and flue, which will form oil pollution over time. Clean, thus affecting the use of range hoods and flues. 81% of kitchen smoke pipes in life are caused by poor smoke exhaust in the kitchen. So how to clean it?

1 generally speaking, the built-in filter in the oil fume purifier is not clean for a long time, and the oil filter is blocked, which leads to the blockage of the flue. Generally speaking, we can use high-pressure jet to strengthen oil to treat tobacco oil, which can obviously improve the smoke flow.

2, a protective film is formed to prevent oil stains from remaining on the surface. The cleaning contents include the surface of the hood, the lampshade, exhaust port, exhaust port, motor and cooktop in the hood. The exhaust pipe is connected to the hood and parallel to the hood, and the key point is to thoroughly clean the inside of the parallel flue.

3。 If the previous cleaning time is less than one year, we can't clean it for the time being, because the lighter lampblack has been cleaned, and even if it is still blown away by the wind, there will be more serious lampblack precipitation. At the corner, it is more difficult to treat, but the oil in the flue elbow is not particularly high, so we just need to treat it simply.

Selection of smoke pipe cleaning strategy and installation process

Precautions for kitchen smoke pipe installation

1. First, we need to check whether there is space and position below the ceiling at the smoke pipe mouth.

2. Pay attention to closing the gap of the smoke outlet when embedding the exhaust pipe in advance, and ensure that it will not fall off.

3。 Before the ceiling is hung, the exhaust pipe of the hood is embedded in the upper part of the ceiling in advance. According to the design drawings of the cabinet, it is necessary to determine the position of the open-air pipe on the ceiling. It is necessary to refer to the style of the hood. The pipe of the European hood is in the middle position, while the exhaust pipe of the sergeant is located on the side of the hood. These conditions affect the location of reserved ports.

4。 If the secondary flue has been removed, or it is necessary to prevent the smoke from getting better, please use the flue check valve. Under normal circumstances, the effect of the check valve of the range hood is not obvious, and installing the check valve in the flue can protect the range hood so that the smoke in the flue will not pour into the pipeline and range hood.

after installing the check valve, it should be cleaned regularly, otherwise the check valve will open and fail, and the flue check valve should be replaced every two years or so. I believe everyone will have a more or less understanding of the above contents, and I hope this article can help you. You can also log in to Tuba Rabbit to view and subscribe to more related content and information.

Tuba Rabbit online provides you with "decoration quotations, 1-4 local decoration companies, 3 sets of decoration design schemes" for free, as well as the decoration pit avoidance strategy! Click this link: /yezhu/zxbj-cszy.php? to8to_from=seo_zhidao_m_jiare& Wb, you can get it for free ~