Thermostatic faucet, also known as thermostatic mixing faucet and thermostatic faucet, can automatically mix cold water and hot water into warm water with a predetermined temperature. After three generations of updates and progress, today's constant temperature faucet not only realizes intelligent constant temperature control, but also has a great breakthrough in appearance, meeting the needs of different families for beauty and faucet. The appearance of constant temperature faucet makes the problem of domestic water use more convenient and simple, which has been well received by consumers.
A temperature sensing element is arranged at the outlet of mixed water in the valve body of the thermostatic faucet, and the valve core is driven to move by the characteristics of the temperature sensing element to realize the opening of the inlet and outlet of cold and hot water. When the cold water is blocked, the hot water is simultaneously opened. When the temperature reaches the temperature set by the adjusting knob, it can also automatically change the proportion of cold and hot water entering the water outlet, so that the outlet water temperature is always constant. The temperature adjustment knob of the constant temperature faucet can be set at any temperature between 35 and 65 degrees Celsius, and the constant temperature water heater will automatically maintain the set outlet temperature.
Installation method of bath hot and cold faucet:
Hot and cold taps are commonly used in bathing. When installing, check which side is cold water and which side is hot water. Generally, hot water is connected to the left and cold water is connected to the right. After alignment, wrap the joint several times with waterproof tape to avoid water leakage, then screw the faucet on the joint, tighten it with a wrench, turn on the switch, and check that the direction of cold and hot water is correct, the water flow is normal and there is no water leakage. In addition, the shower head should be moved and adjusted according to the height. At present, vertical hand-held shower heads are widely used, and the height is generally 2050-2200mm；; . Generally, the height of movable shower on ceiling is 2 100-2300mm.
Installation of single-hole basin faucet:
Pay attention to the diameter of the outlet when paying the bill for the faucet of the basin. At present, most of the water on the market is hard pipe. Pay attention to the height of the water pipe, about 30 meters down from the basin. When installing, you must choose a special angle valve and fix it with the hot and cold water pipes on the wall. If there is a distance between the angle valve and the faucet water pipe, you need to buy a special pipe extension link. You can't connect with other water pipes, otherwise it will leak and fall off because of the high water pressure. If the inlet pipe is too long to exceed the outlet pipe, cut off the excess.
Installation of thermostatic faucet:
Before installing the thermostatic faucet, check which side of the water pipe is cold water and which side is hot water, especially connect the hot and cold water pipes by mistake, so as not to affect the future work of the faucet. Gas and solar water heaters cannot use constant temperature faucets, mainly because the water pressure is too low. Install constant temperature faucet and install cold and hot water filter.
Installation of single-hole kitchen faucet;
Because the kitchen faucet is used frequently and it is easy to loosen when moving around, it is natural to require everything to be stable, so the lock nut must be tightened. At present, there are a number of threaded pipes with enlarged nuts in the building materials market, which have a good stabilizing effect. The obvious effect will become the trend of a generation of trends.
I hope that the introduction of the article can help the owners who are about to decorate, make the new home exquisite and warm, and wish everyone a happy life.