A, ceiling lights how to install
1, choose the drill: choose the right drill, install the drill, punch holes in the ceiling, punch holes are generally large 6mm, pay attention to the installation of the appropriate specifications of the drill.
2, find the hole on the suction cup top plate: take the hanging plate from the suction cup in the take down, and then align the suction cup, screws, pay attention to if the empty space has not been found, to adjust the position of the screws.
3, drilling: mark the place of drilling holes in the wall, pay attention when drilling, be sure to know the depth of the hole.
4, on the expansion screws: the expansion screws race to the hole, and then knocked in with a hammer.
5, fixed hanging plate: the expansion screws will be embedded in the wall, and then fix the hanging plate, pay attention to the hanging plate should be installed firmly, can not let the wood screws offset.
6, fixed ceiling plate and lamp body: the hanging plate and ceiling plate with screws connected, screws, fixed ceiling plate, better to install the lampshade.
Two, ceiling light installation notes
1, installation, cleaning must be convenient
The first point of selecting the integrated ceiling light is to see if you pick the integrated ceiling light is easy to install and disassemble, but also must aspects of the cleaning, so that in the daily cleaning process, it will save a lot of trouble, even if the future again replacement, but also Very convenient.
2, ballast
Ballast is best to choose electronic ballasts, because electronic ballasts specifically have to improve the luminous efficacy and life of the lamps and lanterns. Currently on the market all fluorescent light source must have a ballast to ignite, its role is to bring the instantaneous starting voltage for the light source and the stabilization of the voltage at work, it can be seen that the ballast is good or bad will directly determine the life of this lamp and light efficiency.
3, pick the color temperature is not too high integrated ceiling light keel top ten brands
The so-called color temperature, is the temperature of the color of the light source, yellow light integrated ceiling light color temperature in the 3300K below, and white light integrated ceiling light color temperature in the more than 5300K, of course, there are also between the two. The different light effects and color temperatures of the lamps will eventually lead to different integrated ceiling light lines. So when picking an integrated ceiling light, make sure you look at the color temperature value. The easiest way to determine the color temperature is to bring your palm close to the light source and then look at the color of your palm, if it is reddish, the color temperature is just right.
4, pick the type of phosphor of the integrated ceiling light
At present, there is more than one type of phosphor used in fluorescent lamps, which can be easily checked. At present, the best phosphor used in fluorescent lamps is the three-color powder, because the integrated ceiling light using this phosphor is the most energy-saving, and the light is soft, high color rendering, and closest to the natural light color.
Ceiling is the decoration of the house will do, then the installation of the ceiling and so on is also need to know, ceiling lights how to install and ceiling installation of the notes, we through the introduction of small make up also understand it.