Meeting Minutes of Safety in Production in the First Quarter of 2122 (6 articles in common)

In the real society, there are more and more affairs that need meeting minutes. Meeting minutes are different from meeting minutes, and meeting minutes are just an objective documentary material. Do you know how to write the minutes of the meeting? The following is the summary of the first quarter safety production meeting I collected for you, hoping to help you.

summary of the first quarter safety production meeting 1

The company's safety production work meeting in October of 21xx was held in the conference room on the fourth floor of the passenger station on the afternoon of October 28th, with Zhou Ziliang, director of the office, presiding over the meeting, and ***11 members of the company's safety production leading group and safety management personnel of all units attended the meeting.

at first, the meeting listened to the reports on the safety production and main work of each unit in x, including the standardization of safety production, the investigation of potential safety hazards, the safety education and training of drivers, and the health creation of passenger stations, etc., and the overall performance was good. In terms of passenger income, due to the bus transformation of Xiongkou passenger line and the mandatory scrapping of yellow-label vehicles, the company's passenger buses and passenger resources have been further reduced, the benefits have been declining, and the operating situation is not optimistic.

safety in production in x: there was no safety accident in the passenger station and tourist passenger center, and there was an irresponsible safety accident in Honghu and Beijing passenger buses under the jurisdiction of the transportation department, which are currently being handled.

according to the reports of each unit and the existing problems, the meeting put forward the following requirements and arrangements for the next stage of work safety:

1. When the temperature drops sharply in winter, all production units should further strengthen safety management, strengthen safety publicity and education and training of employees, and allocate triangular wood, snow chains, safety hammers, fire extinguishers and other winter prevention equipment as required, so as to fulfill the obligation of safety notification and take precautions before it happens.

2. according to the requirements of standardization of production safety and "one post and two responsibilities", improve all kinds of data sorting, implement safety responsibilities, and keep communication and reporting with the transportation management department for related creation and declaration.

3. As for the collection of arrears of some passenger buses, the Transportation Department should intensify the collection work, and all of them must be in place before Spring Festival travel rush. Shashi shuttle bus involves the problem of collecting health fees at Shashi station, and will clean up and analyze the situation of passenger cars and explain the situation to operators. Suspension of business for refusing to pay fees.

4. regarding the scrapping of yellow-label vehicles, actively negotiate and communicate with the traffic police department in time, especially the scrapping of long-distance buses, and strive for the support of relevant departments.

5. All units should do their best to prepare for the Spring Festival travel rush in 21xx, and plan and arrange in advance. At the same time, carry out safety inspection activities, focusing on vehicles, drivers and station shops, and make inspection records.

VI. According to the operation situation of the passenger station, plan the docking plan with the bus and adjust the construction plan. And make use of the existing station conditions, in order to play a greater role in a smaller scope, and integrate the long-distance and short-distance passenger buses into the station and parking spaces.

VII. Make internal adjustments to the company's institutions and personnel, especially the employment in passenger stations, and optimize the replacement of some temporary employment to save expenses on the premise of ensuring the stability of the personnel signing labor contracts. The passenger station will first come up with a specific adjustment plan and report it to the company for review, and put it into practice and implementation before X 11. Minutes of the first quarter safety production meeting 2

Meeting time: 21xx February 28th

Meeting place: conference room on the third floor of the company

Moderator: ×××

Participants: company leaders, heads of various departments and project departments

Main contents of the meeting: annual safety production work and arrangements

I. Meeting purpose: < Effectively prevent all kinds of safety accidents and ensure the successful completion of the company's safety work objectives and tasks in, this safety production work meeting is specially held to arrange and deploy the safety production work in.

II. Contents of the meeting:

1. The company's safety work goal should be to achieve no safety accidents and zero accidents throughout the year.

2. Fully implement the responsibility system for production safety, and sign the responsibility book for production safety objectives layer by layer. The company should sign the responsibility book for production safety with the project department for resumption of work in strict accordance with the requirements of management measures, and clarify the responsibilities and work of both parties. Adhere to the principle of "production must be managed safely", hold regular safety meetings and organize safety inspections. All departments, teams, important posts and individuals in special posts should also sign the responsibility book of safety production targets.

3. It is necessary to improve various safety rules and regulations, so that the safety work of enterprises can be followed by laws, adjust the focus of safety management according to the actual situation of the company, meet the safety inspection work of superiors, summarize the shortcomings in safety work and make positive improvements. We must resolutely implement the leadership responsibility system for the rectification of hidden dangers of accidents, and implement management step by step. The hidden dangers of accidents in the construction site must be the responsibility of the company's safety leaders, and the rectification should be implemented within a time limit, so that the responsibilities should be clearly defined and the assessment should be carried out, and the daily management should be "five in place", that is, the organization, responsibilities, inspections, assessments and rewards and punishments should be in place.

4. In order to make the awareness of safety in production deeply rooted in people's hearts and everyone establish the idea of "safety first, prevention first", the company regularly holds safety production work meetings, with no less than one safety meeting and safety inspection every month; Attach importance to safety training and education, organize safety education activities at least once every quarter, and organize all departments, project departments, construction personnel and full-time security personnel to participate; Strengthen the training, evidence collection, reexamination, inspection and management of operators of special types of work, and it is strictly forbidden to work without a license. Conduct "three-level" safety education for new entrants to the construction site, and make education records. Only after passing the examination can they take up their posts, and the education rate should reach 111%, and establish a model for the minutes of the three-level education card safety production meeting.

5. Strictly implement the "safety inspection" system. The company adopts the methods of regular inspection and random inspection to implement the dynamic management of safety production. Such as seasonal safety inspection, rainy season construction safety inspection, special sensitive period safety inspection, lightning protection, fire prevention, heatstroke prevention, etc., the hidden dangers found out should be rectified, and those who fail to pass the re-inspection will be punished, the responsibility of the relevant personnel will be investigated, and the work will be stopped and rectified until they are qualified.

6. the company actively participates in the activity of "creating a safe and civilized construction site", and formulates the standard-reaching plan in combination with the actual situation of the company and the project. The company should strive for civilized construction sites according to the standards of civilized construction sites and strengthen the inspection of civilized construction sites.

7. Strengthen the supervision and management of safety protection articles and facilities. Safety protection articles (safety nets, safety helmets, safety belts, insulating shoes, etc.) must be qualified products that meet relevant national norms and standards. Machinery entering the construction site shall be accepted in the site, and unqualified machinery shall be prohibited.

8. according to the actual situation of the company, formulate the emergency plan for production safety, establish the emergency rescue organization, set up the leading group for emergency handling of major safety accidents, organize relevant emergency drills, and prepare adequate emergency rescue equipment to minimize the loss of personnel and property.

9. according to the company's safety production meeting system, hold regular safety production meetings every month to summarize, solve and arrange safety production work.

11. Reasonable use of safety production management fees, strict implementation of funds, no misappropriation, establishment of special accounts or special funds, and the withdrawal of funds can be based on 2% of the project or output value, so as to effectively improve the working environment of construction personnel, avoid the occurrence of safety accidents, and effectively use special funds for special purposes.

11. The safety supervision department shall do a good job in the company's safety management throughout the year, regularly or irregularly go to the construction site for safety inspection, and implement the company's safety system. Organize the "Safety Month" activities, and the Minister of Safety Supervision is responsible for supervising the implementation, so as to form a strong atmosphere of safety production, implement the core idea of "safety work" in every work, and improve the safety awareness and accident prevention ability of employees.

12. The project manager shall organize the construction in strict accordance with the requirements of the construction organization design and special construction scheme. Do a good job in safety education and technical disclosure before construction, strengthen inspection during construction, and do a good job in acceptance after construction. The full-time safety officer of the project department is responsible for checking the safety in production during the construction process, correcting violations in time and urging the rectification of potential safety hazards.

13. The project department will strengthen the inspection of the safety work on the construction site (focusing on scaffolding, foundation pit, formwork, "three treasures" and "four openings" protection, construction electricity, material hoist, external elevator, tower crane, hoisting and construction machines), carry out regular, irregular and special inspections, and urge the project department to rectify the existing hidden dangers in time.

14, the company-level construction site to establish a fire control system, strengthen the management of fire, fire prevention work on the construction site on a regular basis.

15. All drivers in the company must drive slowly, and do not drink and drive, and pay attention to safety during driving.

16, "May Day", "Eleventh Day", "Spring Festival" and other major festivals to carry out safety inspection, strengthen safety on duty, and ensure holiday safety.

summary of the first quarter safety production meeting of ×××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××× From October to March, 2118, the situation of production safety in our town was generally stable. However, the foundation of safety in production is still weak, especially the owners' awareness of the main responsibility of safety in production is weak, individual owners' awareness of safety in production is not strong, and the hidden dangers of road traffic safety are serious. The meeting informed that a safety accident occurred in Baofa Comprehensive Processing Plant on the evening of April 11, requiring all relevant responsible units and responsible persons to pay attention to it, strengthen supervision, and pay close attention to the implementation of rectification measures to effectively prevent serious accidents.

Second, the meeting emphasized:

All responsible units and persons must raise awareness and enhance their responsibilities; It is necessary to conduct regular and comprehensive inspections and find problems in time; We must pay close attention to urging rectification and eliminating hidden dangers; It is necessary to strengthen cooperation, pay close attention to the management of * * *, do a solid job in the current work safety, and create a safe, stable and harmonious society.

III. Requirements of the meeting:

All relevant responsible units and responsible persons should strictly follow the deployment and requirements of higher authorities on work safety, and combine the actual situation of work and scope of responsibility to earnestly and solidly grasp the current work safety.

1. Strengthen publicity and training.

In combination with the activities of Safe Production Month, we should organize all production enterprises to carry out a publicity, education and skills training on the need for special post personnel to hold their posts with certificates and the need to strictly implement and abide by laws, regulations and policies on safe production in the production process, and establish the awareness that "production must be safe before production" and "safety is the greatest benefit"; Villages should cooperate with the police station to carry out a comprehensive road traffic safety education and rectification activities.

2. Strengthen responsibilities, define work objectives, and pay close attention to the implementation of the responsibility system for production safety.

firmly establish the concept that development is the first priority and safety is the first responsibility, attach importance to safety in production ideologically, and consciously grasp safety in production in action. With reference to the control indicators issued by the county government, at the beginning of the year, our town formulated practical safety production responsibility targets, signed safety production target responsibility letters with village committees, relevant departments and enterprises, and implemented the safety production responsibility system layer by layer, making clear responsibilities, assigning responsibilities to people and strictly managing them, and truly implementing the responsibilities.

3. We should continue to thoroughly investigate and control hidden dangers and do a good job in safety production supervision in key industries.

(1) It is necessary to establish a hierarchical management system for troubleshooting hidden dangers and a hierarchical monitoring system for major hazard sources from two levels of the government and enterprises, so as to make the investigation and management of hidden dangers institutionalized and regular, and resolutely put an end to new hidden dangers. Enterprises should comprehensively investigate hidden dangers, implement rectification responsibilities, funds and monitoring measures for all kinds of hidden dangers that may cause accidents, and put them in place within a time limit to ensure safe production. The government should strengthen the guidance and urge the establishment of a hidden danger investigation and management database, and regularly supervise the investigation and management of hidden dangers. Improve and perfect the quarterly regular meeting system, safety production performance reporting system, safety education and training system, and improve the emergency rescue plan system of relevant departments. Implement three requirements: First, carefully investigate hidden dangers, leaving no blind spots and dead ends; Second, the responsibility, measures, funds, time limit and plan five of hidden dangers rectification work are implemented; The third is to establish and improve the hierarchical management mechanism of major hidden dangers and consolidate the results of hidden dangers management.

(2) Strengthen the investigation and punishment of safety accidents, investigate and punish serious accidents, strictly investigate the responsibilities, and earnestly implement the safety responsibility system. According to the principle of "four don't let go" in the event of an accident (the cause is unclear, the responsible person is not dealt with, the workers and the masses are not educated, and there are no preventive measures).

(3) Give prominence to key points and deepen the special rectification of production safety. The members of the Town Safety Committee should regularly carry out special rectification of production safety according to the functions of their departments, and carry out various special rectification activities such as road traffic safety, dangerous chemicals safety, non-coal mine safety, civil explosive equipment and fireworks safety, boiler and pressure vessel safety, building safety, fire safety and school safety.

in the second quarter, there are two characteristics in the work of production safety: first, May Day is coming, and second, it is prone to geological disasters such as landslides when it is rainy in spring and summer. These are the key and difficult points in the work of safety production, and all the work of safety production should be implemented in the next stage.

① Safety rectification of hazardous chemicals, eliminating safety rectification, and resolutely closing and banning "three-in-one" and "all-in-one" places, and resolutely closing public gathering places with major safety hazards. (2) building construction safety improvement, special equipment safety improvement, geological hazard investigation, etc. (3) strengthen publicity and education, improve safety quality, strengthen the safety training of the main person in charge of the enterprise, safety production management personnel and special operations personnel, and improve safety awareness and safety skills. (4) Strengthen emergency management and improve the monitoring system. All departments, units and enterprises should pay attention to the preparation and revision of the plan, ensure the practicability and operability of the plan, and strengthen the construction of emergency teams.

4. Strengthen the reporting system on the implementation of responsibilities.

starting from this quarter, all villages and relevant units responsible for supervision should briefly report to the Zhen' an office in writing the performance of their work safety supervision in this quarter and the safety within their responsibilities before 25th of the last month of this quarter. Minutes of the First Quarter Safety Production Meeting 4

Agenda: Safety Work Meeting

Meeting Time: xx, X, X, X

Meeting Contents:

1. Provisions on Installation of Electrical Facilities

The meeting stipulated the installation requirements of electrical facilities: In the future, all units must install electrical equipment and facilities according to the requirements of safety production standardization and unify the standards. For example, the equipment installation personnel should design and install according to the requirements of three-phase five-wire system, the socket front end of manual (mobile) tools should be installed with leakage protection, and the power supply facilities such as socket board and control box should ensure that the PE line (zero line) is in place.

2. Arrange the annual safety and environmental assessment of 21xx

According to the actual situation of the Group, the annual safety and environmental assessment of 21xx is at 21x.