Model essay on self-inspection report of fire safety self-inspection (selected 5 articles)

Time has passed inadvertently, and a period of work has ended. Looking back at the problems in this period of work, you might as well sit down and write a self-inspection report. Do you know the format of the self-inspection report? The following is a sample essay (5 selected articles) of the self-inspection report on fire safety, which I have compiled for you. Welcome to read and collect.

self-inspection report on fire safety 1

According to the notification requirements and deployment of xx District Health Planning Bureau's "Implementation Plan for Fire Safety Inspection of Health System" and "Implementation Plan for 111-day Remediation Action for Health System Safety Production", the fire safety of our center has been self-inspected, and now the fire safety self-inspection situation of our center is reported as follows:

1. Establish and improve the organization and clarify the work responsibilities

After our center receives the documents, the leaders of our hospital will convene it immediately. Fire safety is an important part of our center's work, and it is a top priority related to people's property safety. In this regard, our center set up a fire safety leading group with the director of the center as the team leader, the secretary as the deputy team leader, and the heads of various departments as members, and the General Affairs Department was fully responsible for the daily fire safety work. Establish and improve fire safety education, training, inspection, safety evacuation facilities management, fire and electricity safety management, inflammable and explosive dangerous goods management.

Second, the fire safety education and training of employees has been strengthened.

The center has formulated a safety education and training plan, and regularly conducted safety education for employees, so that medical staff and all employees can understand the fire danger and fire prevention measures of the undergraduate department, call the police, use fire extinguishing equipment, and master the methods of extinguishing initial fires and evacuating patients.

Third, formulate emergency plans for fire fighting and fire

According to the actual situation of the center, formulate emergency plans for fire fighting and fire fighting, and clarify the essentials and precautions for fire fighting and evacuation of patients.

Fourth, self-check the overall fire situation of the hospital

1. The hospital is equipped with safety exits, and there are no sundries in the corridors and exits in the building to ensure smooth fire exits. There is a "safety exit" sign at the exit of the stairs.

2. Equipment of fire fighting equipment: There are 11 fire extinguishers in our center (five of which have exceeded their service life), and the others are in normal working condition; Five fire hydrants are in normal working condition.

3. The oxygen used in the hospital is safe, and it can be operated in strict accordance with the oxygen operation procedures. The oxygen cylinder is erected and fixed, and the switch and instrument of the oxygen cylinder are not leaking. Medical personnel can check it frequently to keep the oxygen cylinder clean and deliver oxygen safely.

4. There is no high-power electrical appliance used in the center, and the current wires and lines are in good condition.

5. The fire safety emergency drill is not yet in place.

V. Rectification measures

1. Take fire safety as an important task, and the director of the center should personally deploy and personally grasp it. The responsibility for key parts lies with people. The outpatient service is the responsibility of the general clinic doctor; Ward by the ward doctor is responsible for; The logistics department is responsible for the office and staff canteen; The heads of relevant departments are responsible for each floor.

2. The center shall establish a fire inspection and disposal system, and the first person who finds a fire hazard must handle and report it in time.

3. Check the existing 11 fire extinguishers that can be used in the center regularly, and replace them in time.

4. Conduct fire safety inspection activities in the whole hospital from time to time, and handle any potential safety hazards in time if they are found, so as to eliminate the potential safety hazards.

5. Carry out publicity and education activities with fire laws and regulations and common sense of fire safety as the main content in the center, and organize all employees in the center to conduct fire safety emergency drills as soon as possible.

the center will rectify the problems found in the self-inspection in the near future, and put fire control work in an important position, and carefully handle the relationship between fire control and benefit, so that all employees in the center can establish the awareness of "fire prevention" and master the knowledge of fire safety. Ensure that there is no safety accident in the center. Self-inspection report on fire safety 2

1. Hidden danger investigation data

1. Mainly check the relevant fire safety facilities on campus such as classrooms, canteens, canteens, dormitories, office buildings and construction sites.

2. Conduct all-round inspection on illegal use of high-power electrical appliances and unauthorized pulling of power cords, and handle them in time.

3, the normal use of fire fighting equipment such as fire hydrant, fire extinguisher, do a good job in daily maintenance.

4. For the management of gas and fire use, the campus arranges special personnel to adhere to the patrol system in key periods (call at any time when there is a situation), so that hidden dangers of fire safety can be eliminated in time.

2. Inspection results

1. There is no water in the fire hydrant.

2. The natural gas alarm probe in the canteen kitchen is blocked.

3. The fire extinguisher in the electrical room has not been replaced.

4. Some key locations are short of fire fighting equipment.

III. Remedial measures for hidden dangers

1. The campus informs the inspection results and gives serious criticism and education to relevant personnel.

2. Before the start of May Day, a fire safety education meeting for teachers and students will be held, and relevant materials on fire safety will be printed and distributed, and all classes will be required to carry out class meeting activities with fire safety as the theme.

3. The campus tries to strengthen the capital investment in fire protection and enhance the fire protection potential of key parts such as laboratories, archives and accounting rooms.

4. Strengthen the system of persons in charge of fire safety, and require the persons in charge of fire safety at all levels to attach great importance to it and make persistent efforts to conduct regular fire safety inspections.

5. Improve the "Fire Safety Work Plan" and strengthen the construction of fire fighting team, which constitutes a long-term and effective "fire prevention and extinguishing" working mechanism for campus fire safety.

"Hidden dangers are better than open flames, and responsibilities are more important than Mount Tai". Fire safety work is a constant and unremitting work. The campus will further strengthen fire safety education, constantly improve fire safety measures and ensure the safety of teachers and students' lives and property in line with the service tenet of "all for students, all for students and all for students". Self-inspection report of fire safety 3

According to the notice of the implementation plan of special fire safety rectification issued by the Housing and Urban-Rural Development Bureau of Guandu District, Kunming, the warehouse held an emergency meeting to deploy self-correction and self-inspection of fire safety. In order to conscientiously implement the spirit of the document, combined with the actual situation of our warehouse, our project department organized a self-inspection of fire safety in our warehouse, and now the self-inspection situation is reported as follows:

1. Fire safety management:

1. Establish and improve the organization.

person in charge of fire control safety:

person in charge of fire control safety:

person in charge of fire control team:

establish and improve the responsibility system of fire control safety management, and strictly implement the responsibility system of fire control safety management according to the principle of "whoever is in charge is responsible". The project manager is responsible for the fire safety of the warehouse, and the fire safety responsibility system is implemented step by step.

2. Our warehouse is constantly improving the fire fighting infrastructure. The installation, use and wiring of electrical products are constantly standardized, evacuation passages are unblocked, and emergency lights are installed. At the same time, our warehouse conducted a comprehensive inspection of fire extinguishers on site, disposed of expired and scrapped fire extinguishers, and timely replaced a number of fire extinguishers that met national standards. Movable houses are strictly implemented in accordance with the requirements of Technical Specification for Temporary Buildings in Warehouse, and meet the requirements of Interim Provisions on the Management of Temporary Light Steel Structure Assembled Movable Houses in Kunming Building Warehouse.

3. Strengthen the management of electricity consumption in the warehouse. Focus on checking whether there are combustible materials around the electrical equipment, especially whether the electrical equipment and lamps in the dangerous goods warehouse meet the explosion-proof requirements. In addition, management should be strengthened in the following key places:

(1) Electric welding and cutting places. The warehouse must establish an examination and approval system for the use of naked flame and electric and gas welding operations, and strictly perform the examination and approval procedures for the application for hot work in the warehouse. Personnel engaged in electric and gas welding operations can only take up their posts after holding the operation qualification certificate. The welding and cutting operation site is equipped with sufficient fire-fighting equipment; Containers filled with flammable, combustible liquids, gases and dangerous chemicals shall be thoroughly removed before welding and cutting.

(2) places where electricity is used. Temporary power consumption must be equipped with overload protection devices, and the power circuit and lighting circuit of the warehouse must be set separately, and the corresponding power safety devices should be installed respectively. It is forbidden to use open flame or high heat intensity light source lamps and lanterns in the warehouse, and temporary electricity consumption should comply with fire prevention regulations.

(3) dormitory. Flammable and explosive articles are not allowed to be stored in the dormitory, and it is strictly forbidden to pull wires and use high-power electrical appliances such as iodine tungsten lamp and electric furnace. 36v low-voltage lighting has been changed.

4. Strengthen the fire management in the warehouse. First of all, we must strictly implement the examination and approval system for the use of open flames in dangerous sites. Oxygen and acetylene bottles cannot be mixed. When welding, we should send a guardian to complete the necessary fire-fighting equipment, and clean up the surrounding combustibles while using non-combustible material plates near the welding points to prevent the welding beads from splashing around. Secondly, the flammable and combustible materials such as wood shavings, sawdust and paint scraps produced in the warehouse shall be cleaned up in time by full-time safety officers, and the temporary storage and unified treatment shall be concentrated in the site. Burning is strictly prohibited. The temporary storage yard shall be equipped with fire prevention signs and fire prevention facilities. Finally, it is necessary to set up eye-catching no-smoking fire safety signs in fire hazards such as workers' dormitories, staff lounges and dangerous goods warehouses, set up smoking rooms or designate safe smoking places.

5. Implement strict fire safety management system, strengthen fire safety publicity and conduct fire safety training for workers. We should conscientiously study and implement the new Fire Protection Law. First, we should make clear the person in charge of fire safety, be fully responsible for the fire safety work in the warehouse, set up a voluntary fire safety organization, be responsible for the daily fire inspection and the handling of emergencies, and designate a special person to be responsible for the safety inspection before and after the shutdown, focusing on the inspection of whether there are any hidden safety hazards such as cigarette butts, electric fire sources and open flames, in order to nip in the bud.

2. Highlight key points and strictly check

1. Facilities:

Focus on checking whether the fire-fighting facilities and equipment of my project are missing or damaged, and whether the fire escape meets the requirements.

2. Warehouse:

Check and rectify whether the placement of fire extinguishers, the storage of acetylene cylinders and oxygen cylinders, and the safe distance of acetylene cylinders and oxygen cylinders when they are used meet the requirements of the specification.

3. Regional aspect:

xx Gold Construction Company

mainly inspected the fire exits and evacuation routes, fire prevention spacing, fire truck access, fire water sources and other issues in the warehouse, plate stacking area and wood processing area of my project. It is forbidden to pull and connect wires in the activity room, and it is forbidden to use electric appliances such as rice cookers, electric stoves, electric cups and water turtles.

(a) strict inspection, to ensure that the fire inspection does not leave a dead angle to achieve a clear goal. We focused on the implementation of fire safety responsibility, the implementation of fire inspection system, the integrity of building fire control facilities, safety exits and safety evacuation facilities, fire power management and fire training for employees. In view of asset finance, we focused on the fire protection management of inventory materials storage. Focus on the safety of fire and electricity in the duty room and staff dormitory. At the same time, the acquisition and update of fire-fighting equipment, as well as the formulation and implementation of fire-fighting plans were inspected.

(2) Strengthen education and increase the publicity of fire safety work

Our warehouse is organizing a "fire drill" activity to strengthen the fire safety knowledge of all migrant workers on site through theme activities. During the activity, migrant workers should know how to save themselves in case of fire, so that they can be familiar with basic fire knowledge, report fire, use fire-fighting equipment and put out initial fires, so that every construction worker has fire prevention.

Third, find out the problems and pay close attention to rectification.

During the inspection, the hidden dangers found and the rectification are as follows:

1. When the welder is working in gas cutting construction, the safety distance between acetylene and oxygen cylinders is not enough;

2. There are insufficient fire safety signs and placards in the warehouse;

3. Some fire extinguishers in the warehouse are ineffective (overcharged) and insufficient in quantity;

4. The dormitory of construction workers is made of wooden floor, which is flammable. Workers smoke in the dormitory, which poses a great fire hazard.

rectification:

1. The oxygen and acetylene bottles in the warehouse must be kept at a distance of more than 5 meters and a distance of 11 meters from the hot spot according to the specifications, and this work has been rectified in place;

2. The warehouse shall immediately formulate signs and placards on fire safety, and post and place the required parts; This work has been rectified in place;

3. ministry of materials and equipment, the warehouse, immediately purchased a large number of fire extinguishers, replaced unqualified fire extinguishers in the woodworking processing area, warehouse and plate stacking area of the warehouse, and supplemented the missing parts; This work has been rectified in place;

4. All subcontractors are required to further strengthen the education of on-site construction personnel, strictly manage workers' smoking in the dormitory, and minimize the fire hazards in the dormitory. This work has been rectified and put in place;

In the future work, we will continue to work hard, strengthen the propaganda work, and raise the fire awareness of the whole people; Regularly and irregularly, seriously carry out the fire safety inspection on duty, and put an end to the fire forever. Self-inspection report on fire safety 4

1. Strengthen organizational leadership and improve organizational structure

x Education Office has set up a leading group for fire safety self-inspection with assistant as the team leader, safety supervisor, trade union chairman and principals as members, and all units have set up a self-inspection group with principals as the team leader and leaders of security department (room), general affairs department and moral education department as members. On the basis of self-inspection and self-correction in each campus, the town education office has started supervision and rectification.

2. Define safety objectives and implement fire-fighting responsibilities

Leading groups for safety self-inspection in schools, together with heads of equipment rooms and special classrooms and class teachers, carefully analyze and study fire hazards, determine key objectives and key parts of safety inspection, and clarify fire-fighting safety responsibilities again. Take canteens, dormitories and laboratories as key parts, electricity, gas and oil as main areas, and highlight key points on the basis of general survey.

Third, carry out extensive publicity to enhance the awareness of prevention

The school attaches great importance to the publicity of fire safety knowledge for teachers and students in winter. All units organize teachers and students to watch the propaganda film of four capacity-building in fire protection, and conduct fire knowledge learning, publicity and knowledge competition according to the fire knowledge problem set provided by the town. All propaganda tools, such as blackboard newspaper, class meeting and radio, are also used to publicize all the knowledge of winter fire protection for students, so that the winter safety awareness of teachers and students in the town is obviously strengthened.

IV. Problems and countermeasures found through self-inspection:

(1) The use signs of fire-fighting facilities in schools are incomplete or not obvious enough, and the responsibility has not been clearly defined to specific people. All units should further refine their work, and the responsibility for the safe use of fire-fighting facilities should be more specific and clear.

(2) Fire hydrant boxes are not designed for old buildings, such as Yuhong Building in Jiaoxie Middle School. Ensure that there are fire hydrant boxes within 51 meters around Yuhong Building or add ground fire hydrants near the building.

(3) The wire diameter inside the old building is small, so it is impossible to use high-power electrical appliances, such as diagonal.