Cabinets are the most important furniture equipment in our kitchen. The small kitchen is basically occupied by cabinets. Generally speaking, the correct choice of cabinets is a common sense problem that we must learn. When we choose cabinets, not only the style and color are very important, but also the size of cabinets needs our attention. Let's take a look at the size of the cabinet.

On the design of cabinet size

1, the hanging cabinet standard does not include the standard sequence of door depth 300mm, door width 200mm, 250mm, 300mm, 350mm and 400mm. If the hanging cabinet is too deep, it will encounter and affect the use. The standard height of the hanging cabinet is 650 mm In a narrow kitchen space, the hanging cabinet can be appropriately raised to obtain more storage space. The lower edge of the hanging cabinet is generally off the ground 1500mm. Of course, there are European cabinet styles or visual effects. The bottom of the hanging cabinet is only 450mm or even lower from the countertop, depending on customer requirements and acceptance.

2. The standard of basement does not include the standard order of door depth of 550mm, door width of 200mm, 250mm, 300mm, 350mm, 400mm and 450 mm.. , and depends on the width of hardware fittings and appliances in the standard outer cabinet. If you want to avoid pipes behind the cabinet, or the space is narrow, you can make cabinets with depths of 500mm, 450mm, 400mm, 350mm, and 300mm, and the cabinets of cookers, sinks, and disinfection cabinets are not less than 500mm deep. The standard height of the basement is 650mm, plus the skirting line 1 10mm and the countertop is 40mm, and the countertop is just 800mm from the ground. If customers have special requirements, cabinets with heights of 600mm, 720mm and 780mm can be made. According to ergonomics, it is most reasonable that the cooker is 250mm below the elbow and the workbench is 150mm below the elbow. Don't raise your hand when cooking, and don't bend over when cutting vegetables.

3. Standard depth of table top is 595. If the handle is concealed, the depth of the table top is only 580mm, the table top has a back retaining wall with a height of 50mm wide 10mm, and there is a front skirt with a height of 40 mm without the wall edge. Although it is not necessary to draw the front skirt and the back block when drawing, it must be considered when designing. Sometimes, in order to adapt to the disinfection cabinet and stove, the skirt in front of the table can also be made 60mm high.

The height of the bar depends on the function, whether it is a dining table or a bar. The dining table can be as high as the countertop, and the bar is generally slightly higher than the countertop100 mm-150 mm. ..

Let's take a look at the measurement of cabinet size.

1, when measuring the length, it is best to measure it twice, from left to right and from right to left, to avoid reading the wrong size for the first time.

2. When measuring the ceiling height, it is necessary to measure several quasi-high points in different directions, and at the same time, it depends on whether there is a beam under the gusset plate.

3. Look at the waist line when measuring, move the height from the bottom of the socket to the floor tile, and look at the height of the window at the same time (pay more attention when re-testing).

4. When measuring, measure the distance and height of the gas meter and pipeline from the wall, the height of the flue, the height of the inlet and outlet, the distance of the main drainage pipe from the wall, the height of the socket (during the second interview) and so on.

5. When measuring, it depends on whether there are steps on the ground, concave-convex beams on the wall, and the tension of the screen window should be considered when making hanging cabinets by the window. If the cabinets are relevant, the relevant dimensions shall be measured.

6. Floor tiles and wall tiles should be laid during the second interview. For example, if the hanging cabinet or high cabinet reaches the top, it is necessary to retest the ceiling.

7. When measuring abnormity or polygon, it is best to choose a fixed point and measure diagonal. When making cabinets (floor-standing cabinets and hanging cabinets) with two sides against the wall, it is also necessary to measure the internal and external distances.

8. When there are poor bricks, measure the distance and height to the wall (including the height from the bottom and top to the ground). It is best to leave 700MM long for ordinary refrigerators and extra length for special refrigerators.

9. Measure the thickness (including line) of the door cover where there is a door cover, or open the sliding door to leave a gap of 10-20MM between the ground and the hanging cabinet with a sliding door.

10 For example, in the kitchen of the measuring unit, be careful to ask whether the wall is a slate wall, so as not to install a hanging cabinet.

I believe you should know how to choose the size of the cabinet by now. In particular, it should be reminded that cabinets should not only have the function of storing things, but also be convenient to use to realize their value, which is an important basis for our choice.