How to clean crystal ceiling lamps

How to clean crystal ceiling lamps? In many large spaces, such as living rooms, hotel lobbies and conference rooms, you can see gorgeous crystal lamps hanging from the ceiling. Because it is crystal clear and bright, how to clean the crystal ceiling lamp is shared below. How to clean the crystal ceiling lamp? 1

1. Pave a waterproof floor mat or water-receiving object. If you need to use a ladder, put it in a good position.

2. Prepare all equipment, tools and cleaning agents and put them in place.

3. Take out the high-temperature steam spray gun, press down the steam safety cover, and turn it counterclockwise to open it.

4. inject less than 351ml of clean water (note: it is forbidden to fill the container with water for use) and tighten it clockwise.

5. insert the power cord into a 221V AC socket and preheat it for 5-8 minutes, so as to make sure it is easy to use when cleaning.

6. remove the capacity cover of the microparticle ejector. Pour the special cleaning agent into the capacity cover according to the usage of cleaning the crystal lamp.

7. Add the cleaning agent in the capacity cover into the microparticle injector and tightly cover the capacity cover. Close the regulating valve before filling the cleaning agent. The diluted cleaning agent should not exceed the maximum capacity of the box body of 5L.

8. Connect the microparticle injector to a 221V power supply. To ensure the atomization effect, the motor speed range has been limited at the factory. Please do not disassemble it and change it without authorization.

9. Carry the particulate ejector on your shoulders. When working, hold the ejector tube with one hand, and carry the front of the box slightly higher than the back.

11. When working, press the button at the spray head to turn on the switch first, then gently turn the knob of the regulating valve to adjust the droplet size according to the work needs, and then turn the knob of the governor to adjust the spray speed and distance.

11. Before close-range spraying, turn down the flow of the regulating valve appropriately. No impurities are required to prevent the pipeline from being blocked.

12. After adjusting the flow rate of the regulating valve, spray the whole crystal lamp for 1-2 minutes, and sprinkle the professional crystal lamp cleaner evenly on all parts.

13. Leave the cleaning agent on the surface of the crystal lamp for 3-5 minutes, so that the special cleaning agent can penetrate into the bottom layer of stains and oil stains on the surface of the crystal lamp, and make it fall off, dissolve and emulsify.

14. Every time the power is turned off, please raise the spray head to let the cleaning agent in the cleaning agent pipe flow back to the box to prevent dripping.

15. after spraying, remove the residual liquid of the redundant cleaning agent in the microparticle injector. Inject clean water, turn on the flow, turn on the machine for a while, and dry it for storage.

16. Use a high-temperature steam spray gun, install the extension hose and insert it into the corresponding position until it is completely sealed.

17. Press the steam button gently to see if the steam can be released. And pull back the steam injection lock to lock the steam button for continuous steam supply. (keep the power on during use)

18. Spray high-temperature steam spray evenly on all parts of the crystal lamp to increase the rapid decontamination and oil removal effect of the cleaning agent.

19. Pull out the plug of the high-temperature steam spray gun after use, cut off the power supply, and press the steam button to release the steam pressure until no steam is ejected.

21. Pour out all the water from the internal high-temperature steam spray gun, dry it and put it into the toolbox.

21. Take out the low-pressure mist cleaner, open the cover and inject clean water.

22. adjust the adjustable nozzle to a mist state.

23. Adjust the air pressure of the mist cleaner to the highest pressure.

24. Put the low-pressure mist cleaner on your shoulder, lock the spray rod in a mist state, and spray all parts of the crystal lamp evenly with one hand.

25. after spraying, open the air release valve to release the residual air pressure, and discharge the residual clean water and put it in the toolbox.

26. connect the blower to a 221V power supply, adjust it to hot air state, and dry the residual moisture on the surface of the crystal lamp.

27. Unplug the hair dryer, arrange the power cord and put it in the toolbox.

28, tidy up the scene, clean up, put away all the tools. How to clean crystal ceiling lamps 2

Tips for choosing crystal lamps:

Different choices for different families and spaces

When choosing crystal lamps, you must pay attention to the size of the space and the shape of the lamps. Insiders pointed out that according to the requirements of space, the living room of 21 square meters to 31 square meters should choose crystal lamps with a diameter of about 1 meters. According to different families, different rooms can be selected emphatically: many multi-room families mainly use the living room, so they mainly choose atmospheric and beautiful ceiling-mounted and hanging crystal lamps;

When decorating the bedroom, some young people or newly married people may wish to choose exquisite, charming, warm and multi-pendant wall crystal lamps. If you want to install a crystal lamp in the kitchen, you can install a hanging crystal lamp that is energy-saving and reflects a warm life.

Look for the brand to prevent the false colors

Most crystal lamps on the market start at 1,111 yuan. Different brands of crystal lamps are similar in appearance. It is worth noting that some unscrupulous manufacturers only make superficial remarks. They install high-quality lamp beads on the periphery or obvious place of larger crystal lamps, while shoddy them on the inner layer or hidden place of lighting.

In this way, from the appearance, they are very similar to some famous brand lighting, and people usually choose lower prices for the same appearance. As everyone knows, those goods are rich in gold and jade, but they are ruined. After a long time, all kinds of problems have appeared one after another.

Therefore, people must keep their eyes open and choose carefully when choosing. Some manufacturers of brand-name crystal lamps will engrave a brand logo on every crystal decoration to ensure their quality and let consumers buy a real brand and use it with confidence, so if you buy a brand name, you only need to carefully identify the brand logo when you buy it.

Pay attention to whether the color lasts. The service life of different grades of crystal lamps is also different. Although the difference between high and middle grades is not outstanding, the quality difference between high and low grades is obvious.

When consumers buy crystal lamps, they should first look at its colorful effect, and then look at its gold-plated layer. Generally, high-grade metal fittings are mostly plated with 24K gold, which will not change color or rust for several years, while low-grade ones will not achieve this effect, and will lose their original color in two or three months.

after a period of time, the color of low-grade crystal lamps will darken and the brackets will rust, while the high-grade crystal lamps will not change color for two or three years or even longer.

The crystal ball is the key.

The reason why the crystal lamp can shine brightly is mainly the purity of the crystal ball, the cutting surface and the lead content. Therefore, consumers should take a look at the crystal ball for cracks, bubbles, water ripples and impurities when purchasing. Only a crystal ball can give full play to the best optical efficiency, so that the light passing through can reflect magnificent colors.

On the' cutting surface of the crystal ball, it depends on whether it is smooth and sharp, so as to achieve the best refraction effect of the crystal ball; In terms of lead content, generally high-quality crystal balls will use all-lead crystals, and the lead oxide content is not less than 31%. This is the purest raw material and can emit bright colors.

Pay attention to the brand logo

The quality and price of different brands of crystal lamps will vary greatly. Some famous brands will engrave the brand logo on each crystal veneer to ensure their quality and prevent them from being confused, as long as you carefully identify it when you buy it.

in addition, you need to be reminded that some unscrupulous manufacturers are also good at superficial skills, and the appearance of some imitation crystal lamps can almost be comparable to that of some famous brand lamps. However, it is very likely that they are "rich in gold and jade", such as installing high-quality lamp beads on the periphery or conspicuous place of larger crystal lamps, and shoddy in the inner layer or hidden place of lamps. Therefore, when you buy a crystal lamp, you must polish your eyes to get what you like. How to clean crystal ceiling lamps 3

Tips for choosing lighting

Local large-scale professional stores are the first choice

In recent two years, owners of high-end houses in provincial capitals like to go to Beijing or Guangzhou, where furniture and household products are produced, to buy products, thinking that these places have many styles and cheap prices. The same is true for choosing lamps.

in fact, the lighting industry is developing towards brand management and price integration. Because the store has limited sales space, some samples are not displayed, and consumers can choose to order from the store's electronic atlas and paper atlas. If you buy from a different place, you can't enjoy free installation and debugging services, and you have to pay for travel and accommodation, which is not worth the candle.

it is very important to choose a good local store. It is necessary to choose a store with high industry recognition, good reputation, exquisite after-sales service, generous and generous handling of after-sales disputes, and worthy of consumers' trust. It is reported that the first largest, most comprehensive and professional lighting store in Fujian-Yongfeng [Fuzhou] Home Building Materials City Phase 1 Lighting City is a sales platform integrating retail, wholesale, engineering sample viewing and online display.

the store has: complete and comfortable facilities, adjacent to independent star hotels, high-end office buildings, various catering services, and an oversized parking lot with 2,111 parking spaces. In the future, consumers in Fujian can save the pain of running around and enjoy the one-stop noble and convenient shopping experience brought by Yongfeng Lighting City.

At the same time, we should also pay attention to the following aspects:

Check the signs of chandeliers

Before buying chandeliers, we should first check the signs of chandeliers, such as brand, model, rated voltage and rated power. Among them, the rated power is particularly important. If the selected chandelier power exceeds the standard, it may lead to the deformation of the shell and insulation layer.

The height of the crane should be appropriate

The height of the chandelier should be appropriate. It is recommended to use lamps that can be lifted and lowered at will to facilitate the adjustment and selection of the height. Like the beige chandelier made of plastic, the shape is natural and free of carving, and the spiral shape of the lampshade can be adjusted at will.

chandelier material selection

When choosing a chandelier material, we should first look at its function, and its form is subordinate to the function. Where should the chandeliers made of different materials be placed? We must pay attention to this, because some chandelier materials are not suitable for some rooms, especially in kitchens and other places.