The most popular in the market recently is movable partition. It is a feature that readily divides a large space into smaller or partitioned spaces according to the needs of general activities. It can be found everywhere in our life. For example, in a restaurant, there will be many guests dining in a large space. In order not to interfere with each other, the use of movable partitions can be well separated and do not interfere with each other. Activity partition greatly improves the efficiency of space utilization. Activity partition can realize the flexible division of space and create free space. First of all, movable partitions are very different from traditional fixed walls. The advantage of movable partition is that it can be retracted without taking up space. When a space is needed, it can be expanded and divided into a spatial area, and when it is not needed, it can be put away.

Sliding movable partitions are partitions that consist of multiple partition fans that can be moved along a track. The width of each partition is generally 60~120cm. the height depends on the need, and the structure is the same as that of the partition fan of the assembled movable partition. This partition wall has two types: sliding type and upward sliding type. Sliding type, the lower part is equipped with pulleys, the ceiling and the ground are equipped with groove rails, which is suitable for self-weighted movable partition walls. The lower rail of the sliding partition wall is hidden on the floor, which is easy to accumulate dust and clogging, affecting the use of the floor and aesthetics, so it is seldom used. For the upper sliding type, usually in the upper part of each partition fan to install two sets of rotatable direction of the pulley, along the track to one direction.

Foldable movable bulkhead consists of several foldable bulkhead fans. There are wide fan type and narrow fan type. The wide fan type partition is the same as the push type movable partition. The upper part of each partition is mounted on the rail with a set of pulleys that can change the direction, and the partition is connected to the hinge. When not in use, they can be folded and pushed into storage. This division is affected by many factors and may not be easily replicated if not handled properly. For this reason, a double-fan folding type is used, where two dividers are joined together. The width of narrow fan folding movable partitions is usually 10~30cm, including soft double-folding type and hard single-folding type. Hard single folding type, mainly fiberboard, plastic board or thin steel plate as partition fan, plastic or metal as hinge. Each partition is mounted on a rail with a set of pulleys, which can change direction to form a foldable sliding partition.