Lesson 1: Let's first look at the classification of range hoods.
There are several types of range hoods, but we are not professionals, so we don't need to know much (if you are interested, you can see the discussion about range hoods).
Divided by cabinet cover
According to the market sales, it can be roughly divided into European and Chinese. Chinese cabinet covers can be divided into shallow cover, deep cover and cabinet cover. Shallow smoke machine and cabinet smoke machine have gradually withdrawn from the market due to various reasons such as the same oil absorption and appearance. Because of the low price, some range hoods are still circulating in the market. For example, Yajia's CXW- 192-C 1 was an old model six or seven years ago. Because the price is only three or four hundred yuan, most people buy it for temporary use, so it still sells well in the market. At present, the cabinet cover type is relatively rare in the market, because it is surrounded by three sides, which is inconvenient to operate and ugly in appearance. Deep cover type is mainly used in the market because of its beautiful appearance and moderate price.
Divided by "oil absorption"
The range hood can also be divided into side suction type according to the way of lampblack absorption, and the direct suction type (also called top suction) is simply the place where the wind wheel of the range hood is installed.
Side-suction range hood: refers to the air inlet and the wind wheel of the air cabinet are on the vertical plane, and the air outlet is on the horizontal plane (top). Side suction uses the inner cavity to form a huge flue gas buffer zone, which produces a certain wind pressure, and the pressure of exhausting flue gas is greater, and the exhaust speed is fast and thorough, and the oil circuit is well controlled. Side-suction range hoods mostly mean that the wind wheel is installed at the side or the center of the included angle. It can be seen directly from the appearance that the air inlet is on the side. The suction force of side suction is better than that of direct suction, but it will be more troublesome to clean up because the wind wheel is installed on the oblique angle of the side.
Boss side suction range hood: CXW- 165-259(B.T), you can clearly see that the suction port of the range hood is on the side.
Direct-suction range hood means that the air inlet and the wind wheel of the air cabinet swing on the horizontal plane, and the air outlet is also on the horizontal plane. From the appearance, the air inlet is on the top of the range hood. Because it is convenient to clean. European range hood, a common model on the market, is adopted by most Chinese range hoods.
According to the way of oil fume treatment.
Sometimes you can also see the word "Tuopai" in the article materials. In fact, emissions are relative, mainly according to the treatment of lampblack, separating emissions from non-emissions. No exhaust refers to the simplest range hood in the early stage. Only one fan is installed, which simply sucks the oil fume and discharges it. Oil discharge refers to the separation of oil fume. Various technologies such as filter screen are used to separate the oil fume, and most of the separated oil flows into the oil collecting cup. Generally, the filter screen and oil collecting cup can be seen outside. At present, most of the range hoods are seen on the market, and range hoods that do not take off the exhaust are rare.
I checked the cooking stoves and range hoods this time, because I will go to the building materials city on weekends, so doing some knowledge reserves first can improve efficiency.
Because what they are looking for has more specific comments, the problems may be exposed more. Many big brands have few comments, such as Sakura, Vantage and Tai Fang. In addition, the sorting is in no particular order, and there is no special editing from the order in which the search appears.
A little feeling: From tidying cabinets to cooking stoves, reading posts about electrical appliances, Haier's quality is really not so good, which completely makes me want to choose their products.
Without much gossip, get to the point.
Stove:
Haier:
I asked them to fix it three times, but there was still a problem, but I had to press the switch 15 seconds to hit it. Never buy Haier stoves.
The annual report of 1 has been revised six times.
Germany and Italy:
Not bad.
The performance is ok, but the price is a bit expensive.
Germany and Italy are good, but not very cheap.
Bai Ye:
It is cheap and powerful, but the after-sales service is not good.
Cooking utensils are fine.
Baixin:
Not very easy to use
I don't feel anything special, but I feel that the ignition is slow, but it is said that the cooker with flameout protection is slow to ignite.
Putian:
My family bought a cooker from Putian for more than 800 yuan. Because LG used to make stainless steel, he thought Putian was not bad, so he bought it.
I think that cooker is very good.
Cherry blossoms:
I used it and thought it was ok.
Shuaikang:
This cooker doesn't work well.
Shuaikang's outlet is fixed and will not be easily transferred. Other brands can transfer. If the fire is too big, it will move.
Shuaikang's imported Sabafu burner is not suitable for most families in China. Almost everyone says so, because his fire is small.
Tai Fang:
The furnace core is better, it is made of aluminum, which is not easy to rust and will not make the bottom of the pot very black.
Vantage:
The stove is very good
Vantage range hood (tower) and embedded cooker, within 2000 yuan. Very beautiful. You can visit Madian Dazhong.
It feels good and beautiful. Range hood+cooker *** 1500, very good!
Yajia:
It was repaired six times a month, and either the ignition was not good or it went out after a while. Although the after-sales service attitude is not bad, the maintenance workers really dare not compliment.
Jiahe:
Cooking stoves and range hoods also seem good.
Range hood:
Panasonic:
I haven't heard of Panasonic's good cost performance, which is quite expensive. It seems to be OEM.
Electrolux:
(purchased by Madian Dazhong Electric) It broke down on the first day of installation. Weak suction doesn't work, nor does the motor. Although it was replaced with a new one that day, the quality is a little doubtful.
Enoch kitchen fume purifier:
Recommended by Zhang Gong: Appearance index: ★★★★★☆☆☆ Oil fume removal rate index: ★★★★★★ ★.
Easy cleaning index: ★★★★★☆.
Shuaikang:
Good cost performance and good technology.
It feels good and the noise is not big. I haven't cleaned it for several years, but I still work as usual.
Yes, I was afraid the smell would be dirty, so I bought a high-powered one. Now finding weak gears is usually enough.
Handsome K's range hood has more pumping power than Baiyi. This is similar to stopping the rebellion.
My last choice is Shuaikang. Compared with the ordinary newspaper presentation, Shuaikang's sales manager showed me a wooden board and I was immediately moved.
The range hood is very handsome and Chinese, both practical and beautiful.
Madam:
Range hoods and cookers are very easy to use, and they are sold in oriental home. I have bought it for almost a year, and I am very satisfied. The installer is also very smart.
Tai Fang:
I didn't buy Tai Fang. I feel that there are many grooves in the range hood, and I am afraid it will be difficult to clean it in the future.
"China effect, European appearance", the Tai Fang salesman told customers. I bought "Dinghou Series", CXW- 189-D5BH. I don't even know how he designed it. He only smokes from the front (between two stoves), and there is no wind on both sides. As a result, when cooking, oil flew everywhere, which was similar to the effect without a range hood (I don't know how to say our fellow villagers' products).
The range hood bought in June 2003 from 5438+065438+ 10 was too close to the square and leaked oil everywhere. The maintenance personnel in Tai Fang said that it was a design problem, so it could not be repaired and could not be used at all.
The European range hood I bought from Tai Fang works well.
Chinese style, 1600 or so, I compared it, and this range hood has a very strong suction.
Putian:
The range hood can also
Bought a finely decorated room and sent it to Putian range hood. It's European-style, too general, and the switch is too high to use.
Strongly appeal to everyone not to buy anything from Putian! They're killing me! The appointment for installation did not come. When I came the next day, I took a look and said I couldn't miss any accessories. Then I waited for four days to come, and it took less than 1 minute. I was charged 10 fast money when I installed it! I really want to cry! It took me four days to wait for such a minute. It has cost 200 yuan to toss a taxi! It's really depressing ! !
It smells quiet.
The range hood is noisy and has low pumping power. The fuel tank is very small. The service attitude of the installer is extremely poor, and they try their best to ask for extra money. As long as the money is paid, it is impossible for them to come and repair it.
Vantage:
not bad
Cherry blossoms:
not bad
The range hood cookware like Sakura, especially all types of range hoods, is free of disassembly and washing.
Electrolux:
The new one broke down as soon as it was installed.
The range hoods and cookers in Electrolux are OEM products, so don't buy them.
A simple problem of changing the plane, until the press release, caused his customers to make countless phone calls, and waited for almost a whole day for three days, still not solved. What we still don't understand is that the sales, installation and inventory management of a big brand are so chaotic and inefficient. What's even more incredible is that such a well-known brand, in order to save costs, can let some brand-name installers without professional training destroy their own brands. As you can imagine, Electrolux's commitment to the China market is also short-lived. Therefore, we suggest that netizens who intend to buy Electrolux products think twice before you do.
Boss:
I have a good impression of my boss's range hood.
I used to think the boss brand hood was good, but now I know I chose the wrong one. I ordered a Chinese-style 306 Boss smoking machine from Volkswagen. I tried it carefully and found that there was noise (not ordinary exhaust sound, maybe motor sound, maybe the sound of wheels rubbing against each other or other sounds). The noise was not too loud, but it was absolutely audible. Then tell the boss that the appliance has been repaired. But after many repairs, the problem remains the same, and there is no satisfactory answer for half a month. What a worry! ! !
Yajia:
Yajia's 192-C2A range hood looked good at that time, so I bought it. I didn't know it didn't work until I bought it. After cooking a dish, the kitchen was full of smoke, and even the living room felt choked. The pumping power is really poor. Yesterday, Yajia's workers visited the house and said that the product was fine and normal. Advise everyone not to buy this brand of things. Moreover, when I installed the cupboard, the designer said that Yajia's products were high in repair rate, but I had already bought them, so there was nothing I could do. Call their customer service now, but I can't get in at all. The line is busy. It seems that repair rate is tall enough.
Yajia's installation service is quite poor, and the quality of workers is low and irresponsible.
Bai Ye:
The suction is very small, the service is full of stains or spots, so buy carefully.
Haier:
Haier range hood dropped! Last night, with a bang, I ran out of the living room and saw the range hood hit the cooker, then fell to the ground and broke the handle. Call quickly, and the other end of the phone said, call Haier first, and which company will Haier send it to. Subcontract? Give me Haier's new contact number. You have a good attitude and said to come to my house before today 12. Leave it to mom. I don't know how to solve it. The reason for the fall is that there is no steel plate support, and the range hood is directly hung on the expansion bolt. Has this subcontracting team been trained? How is Haier managed?