The location of the kitchen exhaust pipe is an important part of the overall design of the cabinet, but it is often overlooked, if you do not know beforehand, most of the pipe improperly handled will lead to the kitchen exhaust smoke is not good, many homeowners and businesses between the contradictions are also caused by this, in order to avoid similar problems, you can design and install before the first to understand the treatment of the kitchen exhaust pipe, the current home exhaust pipe Arrangement of three common methods:

First, the kitchen exhaust pipe through the hanging cabinet cabinet into

If you choose to enter the way through the hanging cabinet cabinet, there are a few conditions to pay attention to:

1. flue mouth to be arranged in the height of the hanging cabinet cabinet depth within the scope of the depth of the cabinet, if in accordance with the better upper and lower along the edge of the mouth size, 2000-2200mm in diameter, the flue pipe should be arranged in a way to avoid the problem of the kitchen exhaust pipe, and the kitchen exhaust pipe should be arranged in a way to avoid the problem of the kitchen exhaust pipe. 2200mm in diameter, the flue mouth of the outer edge of the distance from the wall is best not more than 250mm, so as to ensure that after the installation of hanging cabinets, the kitchen exhaust pipe in front of the gas meter, gas piping can have enough space to lead away;

2. Compared with the European-style range hood, this arrangement is more in line with the Chinese-style range hoods. Because the upper part of the Chinese hood usually has a hanging cabinet, while the upper part of the European hood usually does not do the cabinet, so there is usually no space to lead away from the pipe.

If you have a European-style hood and want to do this arrangement, you need to raise both sides of the hanging cabinet, so that the upper part of the European-style hood and the top of the hanging cabinet can have a pipeline to lead to the space, and in the upper part of the European-style hood is designed to be closed, or else the kitchen exhaust pipe is easy to sag around, affecting the effect of smoke and visual aesthetics.

Second, the kitchen exhaust pipe through the ceiling access to the mouth of the flue

The advantage of this treatment is that you do not have to take into account the distance between the mouth of the flue and the wall, to avoid the distance is greater than the depth of the suspended cabinets and the impact of the installation of the suspended cabinets. But in the treatment should pay attention to:

1. Check the flue mouth because the ceiling down, and in the upper part of the reserved space and location of the installation conditions;

2. Pipes should be in the ceiling before the ceiling buried into the ceiling of the upper part of the cabinet design drawings, range hood style to determine the position of the smoke pipe in the ceiling of the outer junction. The location of the pipe of the European-style range hood and the Chinese-style is different, the former is usually installed in the middle position, while the Chinese-style is installed in the side of the hood;

3. Pre-buried exhaust pipe may have a gap, pay attention to close the pipe to ensure that the pipe will not fall off;

This method is conducive to the exhaust of the smoke is usually, but inevitably will be in the upper part of the suspended ceiling with the hood to reveal part of the Kitchen pipes, homeowners can be based on this position and height of the design of the trim.

Third, the space between the ceiling and hanging cabinets lead away from the exhaust pipe

This approach is more suitable for the ceiling is close to the top of the kitchen renovation, you can through the top of the hanging cabinets and the ceiling of the gap between the lateral lead away from the exhaust pipe, choose this way to consider the following points:

1. The location of the kitchen exhaust pipe duct opening must be higher than the top of the hanging cabinets, to ensure that the ceiling and the hanging cabinet

2. The distance between the outside of the flue port and the wall can not exceed the depth of the hanging cabinet, because after the installation of the hanging cabinet needs to be sealed with a ceiling plate to the smoke pipe, if the distance is not enough to operate inconveniently.