As a future practical training students, we work and live in the self also requires continuous learning, in order to make the self reach a better level, to find out the shortcomings, not satisfied with the status quo, and constantly improve the self, diligent and good at learning, and strive to improve the ability to analyze and think about the problem, and to strengthen the self in all aspects of the ability. The following is the student practical training report self-evaluation five that I have organized for you, I hope it will be helpful to you. Welcome to read reference learning!
Student practical training report self-evaluation 1
This practical training tied steel structure is cast-in-place concrete frame structure, steel laps using on-site tied laps, beam reinforcement construction requirements according to the 7 degrees of tertiary seismic configurations, the concrete grade of C25,
In the hoop production of the practical training program. Tools used: hand crank plate, wire cutters, tape measure, talcum pen, the training requirements of the hoop bar length of 1528mm, hoop bar length of the inner ring 330mm. the beginning of the hoop bar production table to set the hoop bar length of the inner ring ruler 330mm is particularly important, which determines the production of the hoop out of whether the hoop bar is in line with the requirements of the bending angle of the hoop bar 90, 135, when the operation of the hand crank plate must be bent to the angle than 90 degrees, 135 degrees more than the angle of the hoop bar, the angle of the hoop bar must be bent to the angle of the hoop bar. Than 90 degrees, 135 degrees more than 1 ~ 2 degrees. After this hoop production mastered the length of material calculation, production of hoop technology, inspection of hoops and other knowledge, so that our professional skills have been improved for future work has laid a good foundation. For the production of the hoop is not in accordance with the requirements, may be in the hoop length and the requirements of the inner ring deviation or in the process of production, touching the hoop set to move the hoop length scale to produce the hoop or big or small, this scenario as long as the adjustment of the hoop set to the length of the scale that is good.
Binding column longitudinal reinforcement to adhere to the vertical reinforcement, hoop spacing according to the requirements of the drawings, in the binding of the same spacing hoop to adhere to the same hoop spacing, binding on the column of the corners of the hoop to the column corners of the longitudinal reinforcement to tie firmly, hoop to be placed horizontally, hoop 135 bends in the column to be staggered to set up the use of the binding in the binding of smooth buckle binding or buckle binding to make sure that the binding must be tight, so that the hoop can not slide. The binding column longitudinal reinforcement training so that I have an in-depth understanding of the requirements of the column structure, the column longitudinal reinforcement, hoop erection scenarios have a deeper understanding of the theoretical information learned in this practice has been a good use of the combination of theory and practice of my knowledge of professional knowledge and understanding of column longitudinal reinforcement, column hoops erection to get a lot of help. In our group in the column longitudinal reinforcement binding progress is also smooth, the division of labor and cooperation to do a good job in order to shorten the completion of the work period.
Easier. In the beam ligating although it is a little difficult but for my knowledge of the beam is very helpful, especially in the part of the beam into the column so that I have an intuitive understanding of the elimination of practical training before the beam into the column part of the fuzzy concepts.
The binding of plate reinforcement should be carefully calculated on each side of the plate, the number of negative reinforcement beams, spacing, to determine the length of the material, the number of segments intercepted. In accordance with the drawings, the length of the negative reinforcement out of the beam to set up the plate reinforcement, plate reinforcement to be tied for the network, in the middle of the plate reinforcement to be added to the shelf reinforcement, plate reinforcement of 90 hooks to be set up vertically downward, each of the outstretched plate reinforcement to be aligned with the placement of the spacing of the set up to be uniform, the middle of the shelf reinforcement to be added to the shelf reinforcement of the plate reinforcement with the same direction as the shelf reinforcement to be aligned with the tied to the negative reinforcement network composed of a neat and orderly. The knowledge of this aspect of the board is not very familiar, after this practical training on the knowledge of the board has a further understanding, strengthen the understanding of the knowledge of the board.
Although the practical training is only a short week, but this week as a three-year learning career to add a wonderful one, this week the combination of theory and practice so that our professional knowledge has been consolidated and improved, independent thinking skills, hands-on skills, sense of teamwork has been a very good training. Our group of binding information for the whole is a little less, in the first few days is a lot of simple, but the final plate reinforcement binding to wait until the completion of other groups of students binding to start binding, in the final day of binding plate reinforcement is almost too busy to come, thanks to the other groups have been completed in order to rush to complete the help of students, in this practical training process, a ring of tightly linked to the ring of the requirement of cooperation between each group in order to complete, this also makes the training process of the team to be completed, and the team will be able to work together. In this process of practical training, the cooperation between each group is required in order to complete, which also makes the sense of teamwork has been practiced, but also enhance the friendship between students.
Student self-evaluation of the practical training report2
We enter society, we deal with all kinds of people. Due to the existence of the relationship of interest, and busy work, many times colleagues will not be like classmates to you warm. And some colleagues on the surface of the smile to welcome, but behind the scenes, but hook and corner unscrupulous, stepping on the shoulders of others continue to climb, so we just out of school a lot of times can not be adapted to.
It affects one's work attitude. Every day just waiting to get off work and go back early to accompany the family. A gentle word of sympathy when you're sick helps create a zippy work environment.
The mood is good, everyone is happy to work, high efficiency. More than once on TV to see the evil of the workplace, the company's coworkers are right and wrong, I think I can do is "more work, less gossip". And in only a few months left from graduation to go, more cherish with the students to get along with each other.
I studied management, in the books learned a lot of sets of classic management theory, it seems easy to understand, but never put into practice, even in the office it is difficult to deal with some of the things that caught me off guard.
Maybe wait until the real management of a company, will appreciate how difficult; we have seen a lot of teachers or books on the case of wonderful negotiations, it seems to be easy, maybe in person or in person to realize the lack of self-potential and lack of knowledge.
During the two months of internship, I have broadened my horizons, gained insights, experienced the cruelty of social competition, and more is expected to accumulate experience in all aspects of my work, in order to prepare for the future of my work on the job.
Self-evaluation of students' practical training report3
The period of ____ practical training period has ended, this short ___ days for those of us who are about to enter the community, is both a training, but also a challenge. The training is to train us to be able to work in the future, to train us how to cope with the real life under the protection of the school and the family wings and how to realize the maximum value of the self in the real life. The challenge is to challenge our ability to understand the frustration and pressure, so the practical training for us, so that we from young to mature a step forward! As the securities teacher said, after this practical training, each student has matured a lot!
Not only that, we also complete the purpose of this practical training, learned a lot of knowledge and realized a lot of truth!
In fact, before the practical training I was full of longing for real estate, but at the same time there is some fear. Because never worked, but also afraid of others are not willing to take care of us, until after I went to let my these concerns are all thrown away.
My practical training place is in Qingyang Road 8, Jilin University real estate Anjuyuan store, there is my sense of the first place to work, so in the final leave, the heart but there is a trace of reluctance. The first day of work, we really with a fool, only quietly sitting there watching the salesman constantly busy their own, as if we were the air, then really feel that I was there to help, and also accounted for space! Until we thought we had been forgotten when, finally someone to take care of us, he is the highest store Mr. Shi. He assigned us our first task - to go out and look around the neighborhood and familiarize ourselves with its location. This was the first task for our group of four, because as a real estate salesman, the first thing you need to do is to familiarize yourself with the neighborhood. Until now I was most impressed with the Anjuyuan neighborhood, *** there are 129 buildings, really called a "big" word, so big that after we walked there for many days, from its southwest corner to the northeast corner, I still can not find the nearest road! So I admire their salesman, so many neighborhoods, they have to put much effort to memorize the condition of each neighborhood.
Because the manager is too busy, so he handed us over to the store a salesman called Nianfuhui, the first day of work he took us to see the listings and let us act as the main character of the purchase of real estate, on the way back he told us to look at the neighborhoods, as far as possible to draw the map of the neighborhoods, and that's what we are the biggest achievement at the moment.
After a period of time together, the store inside the salesman is not so strange to us, and occasionally chat with them can learn something. In the store to work in our two main tasks are: to see the neighborhood and and the salesman together to see the properties. One of the salesman called Meng Yong also joined our "queue" in fact, in the later practical training period, he and Nianfuhui really handed us a lot of knowledge. Such as buying and selling houses to pay the tax is calculated according to the local benchmark price, Hefei City, the benchmark price of housing is: within the first ring of 5,000 yuan square meters, the second ring to the first ring of 4,700 yuan square meters, the third ring to the second ring of 4,400 yuan square meters, outside the third ring of 4,000 yuan square meters, the rest of the 3,500 yuan square meters, the collection of sales tax is based on the benchmark price of the total price of the house calculated at 5, 5%, personal income tax levied by the proportion of the house. Individual income tax levy is 1%, the transfer (deed tax + stamp duty, etc.) total *** by 2, 3% to calculate the commission is 2% of the total price of the house can also be the buyer and seller each a point, and then to the loan tax by three thousandths of a percent + 300 yuan of the fee, so the total *** need to pay the tax is basically these kinds of. At the same time, the salesman also taught us how to recognize the house number, situated, how to look at the bedroom, living room, bathroom and kitchen is how the structure, how is sitting south to north, how is sitting north to south and how the surrounding environment, as they say, our internship is just twelve days, don't want to learn to play in the past, want to learn, if you want to learn, in the twelve days is able to really be able to learn a lot of things!
Work this time, my personal favorite thing to do is every morning quite manager meeting. Unless the day the manager is busy no time to meet, the manager meeting I will sit quietly listening to, although I am just an intern, but I can not put myself as an intern to see, to be called a member of them, listen to the manager meeting, learned basically in the usual work should pay attention to the problem, there is a more convenient is the manager to teach some of the experience and skillful things, and there are some of the businessman in the work of the time the problems exposed, the impression that the manager will be able to learn a lot of things. When the problems exposed, I was impressed that once the manager praised one of their salesman: "others do not want something, for him is the most precious, but also the easiest to grasp, others want something, you have to pay more effort than others to get it". Housing is so, for example, some customers he may need is 3 to 5 layers of the house, but some salesmen will not study the 6 layer or above the house, but if you from the value of the house, the surrounding environment to the customer, he is the existence of the possibility of buying, so there are a lot of potential customers so generation loss, so this is needed is how the salesman to look at such a problem.
There is also when the salesman and the customer constitutes a relationship, the most important thing is that the staff and the customer spirit of cooperation, to establish a good friendship with the customer, so that the customer has a high degree of trust in you, such as some customers in the Jilin University Anjuyuan store to understand to your service, even if you did not find a suitable housing in you, or see a house elsewhere, he will still look for you to entrust you with the agency, which is a successful business, you will be the first time to find a suitable house. Business, this is a successful salesman, after these words, I y feel the theoretical knowledge in the school is important, but to stand firm in the actual more need to learn from our experience to constantly improve and perfect themselves.
When working sometimes more idle, I will also sit there to listen to the conversation between the salesman, salesman and customer exchanges, I remember a new salesman asked a more experienced salesman: how to prevent customers and prevention and control of private price? Experienced salesman said: this is not then can deal with things, in you to buy a house to see the real estate, realize that should be fully prepared to prevent them from negotiating privately, rather than wait until all the problems are concentrated together when you come to solve! That will definitely go wrong. Indeed, there are too many uncertainties in the work, many of the reality of the skills and experience need to be constantly in practice to figure out to understand.
After this internship, I really learned a lot of things in the school can not learn, because although it is a short twelve days, but learned far more than imagined, I'm very grateful to all the staff in the Jilin University real estate Anjuyuan store, without their help, I may not be so smooth completion of the internship, and also learned so much knowledge, in the parting time, each of them is not only filled with gratitude, but also with a sense of cooperation and cooperation with the real estate industry. The time of parting, to each of them is not only full of gratitude, but also to get along with them so many days of reluctance, but also very grateful to the school to provide this opportunity, so that I understand, if I have been a worker, I will be how to grasp the reality of the self!
When I stepped into the school again, I realized that this time, I really grew up a lot!
Student training report self-evaluation4
From this catering waiter, to change my think that dry catering waiter is no future of negative ideas; set up a line of work, love a line of thought, understand a person whether to make a difference, does not lie in what kind of occupation he is engaged in, but whether he is committed to the work engaged in doing a good job. I have the will to practice my profession and the ability to work in the field. I have the will to practice and correct my work attitude; understand the qualities of a successful waiter should be, so as to enhance my sense of practice, will either not do to do a dream, have the morals, have the knowledge, have the discipline of the qualified waiter
I learned the principles of service guests; service guests of the program; service in the work of the rules; banquets out of the dish program; tray skills and end of the support Walking pace; paving the stage, the attention of the stage; change the focus of the ashtray; ordering, writing menus, canceling the attention of the dishes and the promotion of the skills of the dishes; pouring the basic methods of alcohol, procedures and general knowledge of alcohol; dealing with guest complaints and service emergencies to deal with the skills; the restaurant opening preparations for the market and the closing of the market, as well as a variety of service etiquette, catering and hygiene knowledge, knowledge of the fire and so on. Make me become a good waiter laid the foundation.
In this waiter part-time work I evaluated as a good waiter to have.
Love your job: when you love what you do, you do your job joyfully and more easily. We want people who dine to have health, energy and good service. You can make ordinary work extraordinary. And the people businesses need most are people who love their work.
Quickly familiarize yourself with the standards and methods of work: In order for my business and my self to win in the fierce competition, we must be able to put in the work as soon as possible and be competent in order to improve the efficiency of work.
To have the spirit of diligence: catering work is mainly hand work, usually not overweight, do more with will not be exhausted. So we have to do legs, eyes, hands and heart. Take the initiative to work, take the initiative to look for work. "A hard world without difficulty," the proverb says a very profound truth, as long as you are diligent, the door of success will be open for you.
To have self-confidence: compared with money, power, background, self-confidence is the most important thing, self-confidence can help people to remove all kinds of obstacles, to overcome all kinds of difficulties, believe that self is the best.
To learn to be a person: to be a person is to be a dedicated, grateful, helpful and ethical people, sincere people, do serious work, the cause will be more successful
Duty: is to the interests of the company as the most important, responsible for their own jobs; is responsible for the guests, to the guests to supply high-quality products and services; that is, "to no in ", even if no one to supervise you, you will also seriously do a good job, which is the performance of the duty.
ordinary mind to deal with unfairness in the work: there is no absolute fairness in the work, bit in front of the efforts of the people, the opportunity is always equal. There is no necessary frustration to bear the ability, how to pick up the beam in the future.
Team: play team spirit is the consistent pursuit of the enterprise, catering business work by a variety of division of labor, very much in need of team members to cooperate. With team spirit, good cooperation staff and business are more successful.
This part-time work to my experience is very profound, I think we do everything is, every day to improve a little bit: sand into a tower, accumulate a little into a lot, a lot of success is to accumulate a little bit of small and become a big tool. Every day a little bit of innovation, is to lead; every day to do a little bit more, is to the harvest; every day to improve a little bit is to success.
Student training report self-evaluation5
Time passes very quickly in the blink of an eye, I have been looking forward to the end of the practical training week. After two weeks of practical training exercises so that I learned a lot of knowledge back to think about the practical training these days I do have a great harvest. In the teacher's patient guidance and encouragement, the successful completion of the internship tasks, from the overall internship to reach the expected goals and requirements. This total internship gave me a comprehensive, systematic practice exercise opportunities, consolidate the theoretical knowledge learned, enhance my practical skills, I further realize from the practice of CNC machine tool disassembly and assembly for our CNC maintenance professional importance. I will work in the future only have theoretical knowledge is not enough, but also to be able to apply the theory to practice. The teacher's request to us is: must be serious, rigorous attitude and highly responsible spirit, to complete all the internship links.
On the first day, the teacher went to the training room to give us discipline and training in the relevant events teachers began to explain to us the basics of maintenance clamping and the importance of CNC maintenance. In order to let us in the future practical training to understand how we should do better, the teacher exceptionally emphasized the need for us to do records in the disassembly and asked us to write a practical training diary every day. In this practical training, I learned a lot of things, such as patience, I used to do things always in a hurry, so we encountered problems in the first assembly, after the assembly of two more nuts. In assembly it requires a lot of accuracy, if it is not accurate it is easy to have a safety accident it can cause a lot of economic loss or death. We were very aggressive at the beginning, and then we felt a bit boring after disassembling and assembling more times. After that, I thought it might be because we felt fresh at the beginning. So I drew patiently. When we assembled the spindle box spline, we always had a fire after we couldn't install it, but the more the fire, the more we couldn't install it. It took some quiet time to get it to fit. From this incident I realized that patience is indeed very important.
Confidence is also very important, no confidence is very difficult to do great things, celebrities have said, confidence is a key to success. We CNC maintenance professionals can not be in school to learn the future encountered failures or problems. We only have a bold heart fine, in the understanding of the principle of bold and full of confidence to do in order to achieve success.
This practical training let me experience is how to use the new tools we are now in a high-speed development of the times. Whether we can correctly and efficiently use the new tools will largely determine whether we can succeed. Secondly, it is our attitude problem if we do not have a good attitude to deal with the work is that our skills and then high is also difficult to be recognized. It is the attitude that determines everything.
In this practical training, let me experience the most profound is the theory of practical, practice is the only standard to test the truth. Theoretical knowledge is important, but the theory without practice is empty talk. Really do the combination of theory and practice, the theory is really used in practice, in order to better show their talents. I used to think that reading the book to see the understanding, but also to understand, after this practical training, I finally understand, no practice what you learn does not belong to you. As the saying goes: "it is better to believe in books than to have no books", we have to read good books, rather than reading dead books. At the moment, society needs people with strong hands-on skills, not the theory of good people, for our higher vocational students this is more important, our school's goal is to cultivate first-class vocational skills of people.
During the practical training, I think I also have a lot of shortcomings, such as work attitude is not aggressive enough, learning is not serious enough and so on. I believe that after my efforts, I must change these shortcomings later. I firmly believe that after this period of internship, the practical experience gained will be of lifelong benefit to me, and will be constantly verified in the actual work after my graduation. I will continue to understand and appreciate the knowledge learned in the internship, and I will continuously apply the theoretical knowledge and practical experience I have learned to the actual work in the future work, and fully demonstrate my personal value and value of life. To realize my dreams and bright future efforts. How can we see the rainbow without experiencing the storm!" I believe that the self-firm confidence and personal firm will, must realize the perfect dream of self, on the road to success.
Student internship report self-evaluation reference five related articles :
★ Student personal internship self-evaluation reference five
★ Student internship self-evaluation reference five
★ Student internship report personal evaluation of five compilation
★ Internship report self-evaluation template five Samples
★ A Complete List of Five Self-Evaluations of Student Internships
★ A Complete List of Five Self-Evaluations of Student Internships
★ A Complete List of Five Self-Evaluations of Student Internships
★ A Complete List of Five Personal Evaluations of Student Internships
★ A Complete List of Five Self-Evaluations of Internship Reports
★ Five Example Self-Evaluations of Student Internships in 2021
★ A Complete List of Five Self-Evaluations of Student Internships
p>