Work summary of test engineer 1

I joined the company as a probationary employee on XX, XX, XX. As a fresh graduate who has just stepped into the society, everything here is strange to me. It's been over two months now. In this short period of more than two months, I have gradually adapted to the culture and atmosphere of this company, and studied and developed hard in this environment. Under the care and guidance of my supervisor and colleagues, I have learned a lot and made some progress in all aspects. Now I will summarize my situation during this period as follows:

During this period, I worked as an administrative front desk and a software tester in the Human Resources Department and the Testing Department successively:

When I first arrived at the company, I served as the administrative front desk of the company. I carefully read the company's employee management manual, participated in the training of new employees, and learned the company's corporate culture, some staffing and job requirements in the operation of the whole company, and etiquette norms and processes that employees should pay attention to. Through these materials and training, I have a certain understanding of the company, but also understand the norms that employees should have.

During my time as the administrative front desk of the company, the completion of everything from copying, scanning and faxing to distributing newspapers and magazines, delivering documents, and filing recipients, including receiving some visitors, was a test of responsibility and ability.

Registration of office supplies. Asset management came into contact with me during my previous internship. It is very important to ensure that the items received by everyone are accurately registered, reported and purchased in time, and the items in the warehouse are clean and clear.

During this period, I am responsible for the delivery and summary of internal and external mails of the company every day, timely and accurately deliver the letters of various departments, and file them for safekeeping, so as to timely call out information when necessary, and reimburse various expenses to the finance department.

Responsible for employee attendance, timely summarize employee attendance and provide attendance report. According to the interview information provided by the human resources manager, inform the personnel of the interview and follow-up reception. The administrative front desk is very complicated, analytical thinking is very important, and you often need to judge your own priorities. I don't think I've done enough here. In the human resources department, I have always been strict with myself, earnestly and timely doing every task assigned by the leaders, learning from my colleagues with an open mind for problems I don't understand, and constantly improving myself. I hope to be independent in my post as soon as possible and contribute to the company. Of course, when you first enter the workplace, it is inevitable that there will be some small mistakes that need to be corrected by the leaders. But these experiences have also made me mature, and I will consider all kinds of problems more comprehensively to prevent similar mistakes. Here, I would like to thank the leaders and colleagues of the human resources department for their guidance and help in my entry, and thank them for reminding and correcting my mistakes.

After that, I transferred to the testing department as a software tester. The testing department was strange to me before, which was quite different from my professional knowledge. However, the patient guidance of department leaders and colleagues has enabled me to adapt to the environment and operation process of software testing in a short time.

To sum up, the most important thing in software testing is to find and describe the defects of mobile phone functions, which can be roughly summarized as: accurate, concise, complete and standardized.

When describing the main points, the title should clearly point out the wrong main points; The operation flow describes the whole process of the test, including the environment and the operation of the tester, and provides as much relevant information as possible; It is also necessary to state the actual operation results and expected results accordingly. Finally, the main points of the test report and evaluation model are summarized: title, version number, testers, statistical data, probability and personal evaluation of this version of the test.

In addition, some problems will be different from the version designed by software engineers, even some minor problems. At this time, we should give full play to our communication skills, be good at expressing our views, show why software defects must be fixed, and verify our views through practical demonstrations. Software defects must be solved internally as much as possible, which is of great benefit to saving costs and improving product visibility.

In this test process, try to follow the 80-20 principle. In the analysis, design and implementation stages, 80 bugs can be found and avoided by review and testing, while 80 of the remaining xx can be found by system testing. The final xx of X may only be exposed after users use it widely and for a long time. Because testing can only ensure that as many errors as possible can be found, but not all errors can be found. This requires everyone to have a sense of responsibility and patience to find defects.

During these two months, I realized that it is very important to have a harmonious and progressive team. A positive company and leader is the driving force for employees to move forward. If the company gives me such an opportunity, I will cherish it and do my best for the development of the company. Here, I apply to become a regular employee, hoping to become a regular employee of the company. I asked the leadership for approval. Thank you!

Test Engineer's Job Confirmation Summary 2

The four-month internship and probation period gave me a deep understanding of mobile phone software testing, that is, I tried my best to find the shortcomings of testing mobile phones, and after the developers solved them, let the mobile phones meet the listing standards as soon as possible. These bugs are the value created for the company. As an employee of xx for four months, I also have a certain understanding of the company. Xx Technology Co., Ltd. is a reliable consulting and technical service provider. With super global operation capability, strict quality standards and efficient delivery process, the company is committed to becoming a "new era partner" of global enterprises and escorting customers successfully. Since 19xx, xx has been committed to providing global customers with world-leading business /it consulting, solutions and outsourcing services, and has accumulated rich industry experience in the fields of financial services, high technology, telecommunications, tourism and transportation, energy, life sciences, manufacturing, retail and distribution, and its main customers include many Fortune 500 companies and large and medium-sized enterprises in China. My xx branch mainly undertakes the task of testing Nokia mobile phones, which has been highly recognized by xx company in the previous testing work.

I. Advantages and disadvantages in work

We should learn from failures and sum up successful experiences. My definition of success is: success is to complete the established plan or goal on the premise of ensuring quality. All other results are failures.

Advantages:

(1) Dare to accept the task and do everything possible to complete it.

After working for four months, every task is a challenge for me. Completing the task with good quality and quantity is the most basic requirement. Even unfamiliar tasks will be completed on time with your own efforts and the help of your predecessors.

(2) Be brave in making mistakes and face up to your own problems.

During these four months' work, I made some mistakes, and the test tools were not used skillfully, which led to the irregular filling of test results. I insist on the idea that mistakes must be corrected, and I will face up to my mistakes and actively correct them.

Insufficient:

(1) Due to my short working hours, I participated in a lot of training, and I was not proficient in using this knowledge during the test, so I found a bug in my mobile phone.

The quantity is not high.

(2) At the beginning of work, I was not very skilled in using some testing tools, which would delay some working hours during the use, resulting in nervousness when completing the task within the specified time.

Second, the improvement of future work.

(1) Pay attention to every detail and don't ignore minor problems.

To do a mobile phone test, the first thing you need is to be careful. Only in this way can we find bugs in the mobile phone, and we can't let go of any execution results different from those described in the test case. No matter how small the difference is, many bugs are generated from these subtle differences.

(2) Repeated work should not be sloppy.

Mobile phone testing Sometimes the same test case needs to be tested repeatedly on different mobile phones, which tests my patience. Every time you do a test case, you should do it for the first time and carefully implement every step.

(3) Comprehensive consideration of the problem

Every time we do a task, we have to have some free tests of divergent thinking, which requires us to fully develop our own thinking and do as many tests as possible when considering problems, so as to find more bugs.

(4) Strengthen study.

In addition to attending various trainings at ordinary times, you should review and summarize in time after the training. If you don't understand anything, you should consult a master or an experienced person in time to improve your testing skills. You should also carefully study the testing tools and practice their use to ensure proficiency.

Third, the prospect of the next step

I am confident that the next stage of work will be better than before. After four months of work and study, I have gained some useful experience, which I believe will be of great help to my future work. I hope to improve the quantity and quality of bug reports in the future. In addition, I will continue to learn more mobile phone testing methods from my masters and predecessors to improve my ability.

These four months of work and life are very fulfilling and interesting. I have made many colleagues and friends, and the atmosphere of the company is very relaxed and happy. Thank you for the care of team leader xx in the past four months, the careful guidance of colleagues in the department and the enthusiastic help of colleagues in the company. I hope that in the next work, we can learn from the past and draw lessons, so that individuals and companies can advance and retreat together and achieve the glory of xx together.

Summary of Test Engineer's Work Chapter 3

I started working as a mobile phone software testing engineer in Menglong Mobile Communication Company on 25th, 20xx, and I passed the two-month probation period unconsciously. During this period, I learned a lot. Although this is not my first job, during this period, I have always been modest and cautious about my work. ...

I started working as a mobile phone software testing engineer in Menglong Mobile Communication Company on 25th, 20xx, and I passed the two-month probation period unconsciously. During this period, I learned a lot. Although this is not my first job, during this period, my work attitude has always been modest, cautious and conscientious, and has never changed.

In the work of this department, I have always been strict with myself, earnestly and timely completing every task assigned by the leaders, learning from my colleagues with an open mind, and constantly correcting the shortcomings in my work; Cooperate with department leaders to implement and complete all the work of the company,

In the past two months, through continuous learning and self-improvement, I have adapted to my work. But for a newcomer, it may not be comprehensive enough to fully integrate into all aspects of the company, but I believe that through the careful guidance of company leaders and colleagues, I will definitely improve my level and quality in my future work and better complete my job.

In the future work, I will continue to strive to overcome my own shortcomings, make up for them, learn from white-box testing and internal code testing, strengthen my understanding of software testing and computer languages, and constantly learn from myself, and strive to become a learning, innovative and practical talent in the new century.

Summary of Test Engineer's Work Chapter 4

Enriched and compact working life, two months have passed. During this period of time, I have gained a lot from my work, enriched my knowledge and increased my experience, but also exposed many problems and shortcomings. Summing up experience and drawing lessons, this paper will mainly summarize the work from several aspects: the main content of the work; Failures and lessons as well as successes and experiences; Look forward to the next stage of work and determine your own goals. Take this as a mirror and take history as a mirror.

I. Main contents of the work

In these two months' work, my overall task is to assist xx to do a good job in the post-testing, coding, modification and documentation of xx management system of xx Armed Police Force. After decomposition, I mainly did three things: writing various documents of xx system; System coding and bug correction; System testing. Let me introduce my work according to time.

For a newcomer who has not been exposed to the standard software manufacturing process, it is a big problem to enter a professional software manufacturing company for the first time. If you do development directly, the business is unskilled and the code is not standardized, which is not worth the loss; If you just study, you can't keep up with the rhythm of the project and can't integrate into your work as soon as possible.

While I was still worried about what I was going to do, the task was given. First, I tested the xx system. The advantage of this is that you can understand the overall layout of the project, the business logic in the project and the unfinished work in the project during the testing process, which is the goal of the next stage. At this point, the introductory work started smoothly.

After testing xx system, many problems of the system were exposed. During the test, it was found that xx system has no restrictions on input. In order to solve this problem, it is necessary to sort out the data of the whole system. My next task is to write the data requirement document of xx system. In the process of writing this document, I have a deeper understanding of xx system, which has laid a certain foundation for the later bug correction work.

After completing the data requirement document of xx system, the new task is to limit the input data of the whole xx, which is extremely difficult at the beginning. Fortunately, with the help of colleagues, the task was successfully completed. Although the task was completed, the implementation method of input restriction with little knowledge and carelessness in the process of task completion also laid a bitter fruit for the problems that appeared later.

After adding input restrictions to xx system, it enters the stage of solving small problems in the program and carries out fine sewing work on xx system. During this period, I spent more time studying than working. Different questions urge me to get in close contact with Baidu hundreds of times a day, and also disturb my colleagues to take time out of their busy schedules to help me. Although a little hard, but full of harvest.

After the system was repaired, our program was sent to xx line for the first round of testing. During the test week, I mainly supplemented the basic knowledge of network programming.

After the first round of test results came out, our project team began the first round of xx system bug correction. After getting the bug list, I found that half of the mistakes were caused by me, and there were many problems with input restrictions. I also took the initiative to fix the bug of input restriction.

After the first round of bug correction is completed, the first round of regression testing is conducted. The test results are not satisfactory, and there are still many problems to be corrected. Moreover, many problems are caused by me, and there are still many problems with input restrictions. After another revision, our program was sent to xx line for inspection.

In addition to the inspection, I received a new task to complete the overall design of xx system and the preparation of detailed design documents. These two documents were written on1October X.

At this stage, my task is to test the mining right system according to the bug list.

Second, the lessons of failure and successful experience in the work

We should learn from failures and sum up successful experiences. My definition of success is: success is to complete the established plan or goal on the premise of ensuring quality. All other results are failures.

Successful experience:

(1) Dare to accept the task and do everything possible to complete it.

The biggest gain from joining the company for two months is to dare to accept the task and work hard to complete it. Every task is a challenge for me who just entered the workplace. How to complete the task with good quality and quantity is the most basic requirement. The greatest success of these two months is that no task has been delayed, and every time I try my best to complete the task.

(2) Be brave in making mistakes and face up to your own problems.

In these two months' work, there have been many mistakes, ranging from the small problem of document typo to the big mistake of incorrect modification of xx system bug, which led to the crash. I have been adhering to the concept of repeating my mistakes, facing up to my mistakes and actively correcting them, so this is also a success.

Lessons from failure:

(1) Pay attention to every detail and don't ignore minor problems.

In the initial process of compiling the data requirement document of xx system, the data of some pages were not stored in the database, and the data requirement document had to be revised later, which caused unnecessary waste of time. The lesson of this incident is not to let go of any small problem, which may lead to big problems in the future.

(2) Repeated work should not be sloppy.

After being familiar with the method of input restriction in xx system, it is a repetitive work. Input control statements are added to every page and every field. After several pages, some pages are not completely added, or the prompt statement is incorrect. A large number of such problems appear in the subsequent bug errata, which wastes a lot of time and energy to modify. The lesson from this incident is that we should not be sloppy in our work, and we should do better repetitive work. General repetitive work is a waste of time if it is not done well the first time, and it is also a waste of time to check and modify it later.

(3) think carefully.

In the process of correcting the bug of xx system, there is a problem in judging the input qualification conditions. I take it for granted that I processed the data according to my own subjective thinking, but there was something wrong with the regression test. These are the consequences of lax consideration. The lesson of this incident is that lax consideration directly leads to the overthrow of the problem, affecting work efficiency and easily burying hidden dangers.

(4) Pay attention to the user experience

In the process of bug errata in xx system, the most important modification lies in the prompt statement of coordinate system, because the coordinate system not only requires data to be filled in, but also has strict format restrictions for each data, so the pop-up of each error prompt should be set according to the principle of how to let users know what is wrong. At first, the sentence was rough and the pop-up sentence was unclear, which brought inconvenience to users and had to be reformed again. The lesson of this problem is that we must consider the problem from the user's point of view, pay attention to the user experience, and start with simple prompt sentences.

Third, look forward to the next stage of work

In the next stage, in the short term, our work is mainly aimed at modifying our system by changing the database used in the mining right system. My main task is to learn the difference between oracle database and sql database, and do a good job of migrating sql database to oracel database.

These two months of work and life are very substantial and interesting. I have made many colleagues and friends, and the atmosphere of the company is very relaxed and happy. Thank you, Manager xx, for your concern in the past two months, the careful guidance of colleagues in the department and the enthusiastic help of colleagues in the company. I hope to learn from the past, sum up experience and learn lessons, so that individuals and companies can advance and retreat together and achieve the glory of xx together.

Summary of Test Engineer's Work Chapter 5

How time flies! My three-month probation period ended in a blink of an eye. This is a precious experience in my life, which left a deep memory for me. During this time, the leaders gave me enough tolerance, support and help, which made me fully feel their "all rivers run into sea" and their own shortcomings. But I will study harder in the future, and I will often ask my predecessors for advice! Let me sum up my feelings in the following aspects.

First, study hard, pay attention to practice, and constantly improve their own literacy and work ability.

Always regard learning as an important way and method to acquire new knowledge, master methods, improve ability and solve problems, and earnestly arm the mind with theory, guide practice and promote work. Only by actively thinking and actively using our existing knowledge in social practice can we test the usefulness of knowledge in practice. So in these three months' work, my feeling is that I know something about the testing of mobile phone application software. Although my job is still a tester, it is still very different from my previous job. The most obvious thing is that mobile phone application software has added billing test, upgrade test and interrupt test. At the same time, continuous learning at work is also an effective way to make up for one's own shortcomings. The society is changing, so are people. If you don't study for a day, you will fall behind. After three months' probation, I have carefully studied Shen Xun's harmonious policies, management systems and work regulations, so that the difficulties in my work can be solved most effectively. Through the study of these work regulations, I have further deepened my understanding of all the work and been able to carry out all the work pragmatically.

The second is to focus on the center, highlight key points, and do your duty.

I treat every job with a serious and responsible attitude in all my work. Although at first I felt that I couldn't work well in the company because of my lack of experience and understanding, I quickly started to find reasons from myself, communicated with my colleagues, realized my own shortcomings, and quickly changed my role. In order to make myself familiar with my work and enter the role as soon as possible, on the one hand, I take the time to consult relevant materials and get familiar with my job responsibilities, on the other hand, I pay attention to the knowledge and information of related industries and get a more comprehensive and systematic understanding.

Third, work with great enthusiasm.

When I first entered this job, I didn't adapt to the change. I couldn't find too many questions, and I was a little disappointed. At first, my enthusiasm faded. But I still try my best to keep my original enthusiasm and want to do useful things, and keep doing some chores. At the same time, I have the courage to help my colleagues do all the work, find my skills slowly, and understand what I should do and how to do it. This is a passionate question. As long as I keep great enthusiasm, I believe I will be recognized. There is nothing I can't do, nothing I can't do well, only you are willing to do it.

Fourth, the existing problems

In recent months, although some efforts have been made, there is still a big gap from the requirements of office leaders, such as theoretical level and working ability, which need to be further improved. These problems are determined to be improved and solved in my future work and study, so that I can do my work better.

In view of the above shortcomings and problems, I intend to do the following to make up for the shortcomings in the future work:

1, make a good internship plan, continue to strengthen the study of the company's systems and businesses, and realize a comprehensive and in-depth understanding of the company's systems and businesses.

2. Improve your working ability by practice and study. Pay attention to practice while paying attention to learning, guide practice with what you have learned in practice, and improve your working ability and level in all aspects.

3. Do your job in a down-to-earth manner. In the future work and study, I will do my job well with a more positive working attitude and a more enthusiastic working style. Work hard and strive for "nothing better" at work.

4. Continue to do some work for the company while doing your job well and make due contributions to the company.

Summary of Test Engineer's Work Chapter VI

The probation period has expired. During the probation period, I worked as a software engineer in the development department of the company, mainly engaged in the development of java projects, not seeking to shine, but seeking to be calm and calm; The achievements made during the probation period are as follows:

First, the Finance Bureau project, I am independently responsible for the development of three subsystems of the accounting department.

1, accounting personnel credit inquiry system.

2. The credit information system of the agency bookkeeping institution.

3. Online filing system for accountants.

After the above three subsystems are online, it is convenient for all sectors of society to inquire about the real information of accountants, the information of legal agency bookkeeping institutions and report accountants to all units.

Second, the catering industry project, in the team development project directly participated in the xx company headquarters information integrated management platform project, mainly responsible for the following systems.

1, house lease contract management system.

2. SMS sending and receiving management system.

3. membership management system.

4. Basic information management system and some functional modules of personnel management system.

After the application of the system, xx has improved the management efficiency to a certain extent and provided the corresponding early warning information in a timely and effective manner in the management of house lease contracts in various stores across the country. Short message receiving and sending system is convenient for headquarters to transmit all kinds of information in time; The membership system better manages the membership information of all stores in the country; Personnel system reduces management workload, etc.

Third, the financial industry project, I participated in the development of some modules in the enterprise transfer management system of xx Branch of xx Bank. The system is convenient for enterprises to realize a large number of complicated transfer work quickly.

Four. Project xx is responsible for developing the online declaration and review system of housing monetization subsidies. This project adopts new technology, which makes the interface more elegant and beautiful, and greatly improves the effect of man-machine interaction platform.

Insufficient summary: when working on the project in xx headquarters, due to some internal reasons and other external factors, the work efficiency, development progress and final software quality were affected to some extent; This is something that every member of the project team, including me, must review.

Summing up the work in the past year, although some progress and achievements have been made, there are still some shortcomings, and individual work is not perfect enough. In my future work, I will try my best to find out the shortcomings in my work so as to overcome them in my future work. Self-study and absorb new technologies, carefully study specifications and related documents, and apply new technologies to practical projects in time to further improve the technical content of the projects.