In China, most people mainly eat Chinese food, and cooking at home will inevitably bring a lot of oil smoke. At this time, the range hood has become a necessary appliance in the kitchen. But after a long time, it will be found that the hood is contaminated with a lot of dirt, which will easily become a hotbed of bacteria if it is not treated in time. So how to disassemble and wash the range hood? How to do a good job in the daily maintenance of the hood?

Steps to disassemble and wash the range hood

Generally speaking, there are many professional cleaners in the market now, but you can do it yourself if you don't want to spend money. The correct steps to disassemble and wash the range hood are as follows: first, read the instructions carefully and know the internal structure of the range hood in advance; Then unplug the power supply, and then start to disassemble the oil fume. First, remove the drip bowl, filter screen and other spare parts and put them into a container filled with soda water for soaking, but the parts with thick oil stains need to be scraped off with a blade, then clean them, rinse them with clean water again, and finally dry them, install them and turn on the power supply for trial use.

Daily maintenance of range hood

1. Clean the range hood while it is hot after each use

In order to prevent the machine from accumulating too many dirty things and causing difficulties in cleaning, everyone should do a good job in daily cleaning. For example, after each use, you can let the machine run for 31 seconds to 1 minutes, exhaust the residual harmful gas to the outside, and wipe the surface with a rag in time while there is still residual heat when turning off the range hood, so that the oil stains on the surface can be easily wiped.

2. Do anti-oil treatment before using the new range hood

Most people will directly use the newly installed range hood. In fact, you can do some simple anti-oil treatment to make you clean easily in the later stage, such as sprinkling a thin layer of soap powder on the oil storage box and injecting one third of water, so that the oil dripping in the later stage will float in the water instead of condensing on the box wall, and then do the same thing when the waste oil is full. For the anti-oil treatment of the fuselage, it is necessary to wipe it with a slightly wet rag dipped in detergent, and the blades can also be wiped. After drying, a layer of detergent coating will be formed. If it feels sticky after a period of use, it is necessary to clean the fuselage, and directly clean it with hot water at 81℃. After cleaning, don't forget to apply the detergent to the fuselage again. Simply cover the key with a layer of plastic wrap.

3. Cleaning of the fan blades

The fan blades are the most important parts in the operation of the machine. Before cleaning, you should stick a newspaper on the bottom or wall, then spray oil on the panel and fan blades of the machine. After a few minutes, turn on the hood, use the centrifugal force of the fan to pump away the oil fume and dissolved dirty oil, and then wipe it with a wet paper towel.

Summary: The above is the correct steps of disassembling and washing the range hood that Xiaobian brought to you today. I believe friends have a certain understanding. You can refer to the methods of disassembling and washing the range hood and daily maintenance. I hope this article will be helpful to you.