First of all, we should determine the location, try not to choose the place where the air circulation, because if the air circulation is fast, the oil smoke will be affected by the wind when it rises, spreading to every corner of the kitchen in advance, which will affect the purification effect of the purifier. And the exhaust pipe of the purifier should be shortened as much as possible, so as not to pile up the grease and smoke in the pipe, and do not design the corner, otherwise the exhaust effect is poor.

2, determine the installation height.

When installing the purifier, you should also pay attention to the height, which is very important. Because the height of the purifier will relate to its smoking effect, if the installation is too high, the smoking effect will be worse. Therefore, before installation, to carefully confirm the height of the purifier, but also to take into account the height of the user, so as not to touch the person's head when using.

3, determine the installation hole position.

When installing the purifier, you need to make holes in the wall for installation, and you should pay attention to the purifier can not be installed on wooden walls and cabinets, or a fire will occur. And the wall where it is installed should be solid and sturdy in order to meet the daily use and not fall off. Then the holes are punched in the installation position, and they should be fixed with matching screws. After the holes are installed, but also to plan in advance the location of the socket, usually installed in the cooktop above about 80cm can be, must be used to ground the reliable socket.

4, the installation of straight pipe connector

Next, but also to install the top outlet straight pipe connector, and then install an exhaust elbow, from the top of the cabinet through, so as not to affect the aesthetic. Next the louvered dampers are fitted, with the damper facing downwards.

5, test the effect

After the installation of the oil smoke purifier, to open the power supply to test whether the product can be used normally, to see how its purification effect. Also pay attention to see whether the purifier will appear noise, if the noise is relatively large, it will affect people's lives.

How to clean the kitchen fume purifier

1, detergent, vinegar soaking method

The impeller will be removed, immersed in a pot of warm water mixed with 3-5 drops of detergent and 50mls of vinegar, immersed for 10-20 minutes, and then scrubbed with a clean rag. The casing and other parts are also cleaned with this solution. This method has no damage to human skin, no corrosion on the device, and the surface still retains its original luster after cleaning.

2, pressure cooker steam flushing method

The high-pressure cooker cold water boiling, to be steam continuously discharged when the pressure valve is removed, open the range hood, the steam column of water against the rotating fan, due to the high-heat water vapor constantly rushed into the fan and other parts of the oil and sewage will be routed to flow into the waste oil cups, until there is no oil in the oil cups until.

3, the soap solution surface coating method

Soap will be made into a paste, and then coated in the impeller and other devices on the surface, to be used for a period of time after the removal of the impeller and other devices, a wipe with a rag, the oil is off.