Code of Practice for Cleaning Services

1.0 purpose

Standardize the daily cleaning operation management, ensure the quality of cleaning service, and provide comfortable, clean and elegant living environment for business households.

2.0 scope

Applicable to the daily cleaning management of the property companies (management offices) under the jurisdiction of the property group.

3.0 responsibility

3. 1 The manager of the Ministry of Environment and Health is responsible for the inspection and assessment of daily cleaning.

3.2 The cleaning supervisor is responsible for formulating and organizing the implementation of the daily cleaning work plan, and evaluating each post.

3.3 The cleaner is responsible for the daily cleaning within the scope of this post and the implementation of this specification.

3.4 The Total Quality Management Office is responsible for inspecting and supervising the daily cleaning work.

4.0 Work content

4. 1 Indoor cleaning

4. 1. 1 lobby cleaning

4. 1. 1. 1 It is scheduled to clean the lobby once every morning before 8:00 a.m. and in the afternoon before 16:00 a.m., and patrol and clean at other times to clear up garbage and sundries in time;

4. 1. 1.2 Sweep the ground garbage with a broom and remove the stains with detergent;

4. 1. 1.3 Empty the trash can, clean it and put it back;

4. 1. 1.4 Clean the dust and stains on the lobby floor with a dust pusher or mop, and transport the garbage to the garbage bin;

4. 1. 1.5 After cleaning the elevator car, mop the floor in the car twice with a wet mop;

4. 1. 1.6 Wipe all kinds of stainless steel products in the lobby with dry towels and stainless steel oil, including doorposts, lettering, billboards, elevator doors, carriages, etc. , twice a month;

4. 1. 1.7 After wringing with a wet towel, wipe the public facilities such as door and window frames, fire doors, fire hydrant cabinets, signs, letter boxes, interior walls, etc. in the lobby twice a month;

4. 1. 1.8 Wash the steps at the entrance and exit with detergent twice a month;

4. 1. 1.9 Wipe the lamps, tuyeres, smoke detectors and fire indicators once a month;

4. 1. 1. 10 has a marble lobby, and the marble floor is waxed once every two months and polished once a week. Floor tile floor and water mill floor should be thoroughly scrubbed with detergent once a month.

4. 1.2 corridor cleaning

4. 1.2. 1 Prepare tools such as broom, garbage shovel, plastic bag, plastic bucket and mop. From the top floor to the bottom floor room, clean the corridor steps from top to bottom, collect peels, cigarette butts and scraps of paper in plastic bags, and then pile them in the trash can; Drag the steps step by step from the top floor with a mop, once a month. When mopping the floor, wash the mop several times.

4. 1.2.2 Prepare some rags and plastic buckets (filled with water) and wipe the stair handrails and railings from top to bottom. When wiping, wipe the rag several times;

4. 1.2.3 cleaning fire hydrants and pipes: prepare a broom, a plastic bucket (filled with water) and two rags (wet and dry). Clean the dust and cobwebs on the fire hose with a broom, then wipe the fire hydrant and glass with a wet rag, and then wipe the glass with a dry rag once a month, and clean them one by one according to the above procedures;

4. 1.2.4 Clean walls, billboards, switches, plastic brooms with long handles, plastic buckets (filled with water), rags and scrapers. Clean up the cobwebs on the wall with a broom first, and then tear off the advertising paper posted on the wall. If there is any residual paper, wipe it with a wet rag, scrape it off slowly with a scraper, tear off the expired publicity materials on the publicity board, and wipe it clean with a wet rag; Wipe the rag, screw out the water, and wipe the switch panel of each corridor lamp twice a month;

4. 1.2.5 cleaning electronic doors: prepare ladders, plastic buckets (filled with water) and rags. Wipe the electronic door and mailbox from top to bottom with a wet rag. When wiping, first clean the rag several times, and then wipe the number plate and button on the letter box and electronic door with a dry rag.

4. 1.2.6 Wipe the dust and stains on the distribution box and electric meter once a week with a dry rag;

4. 1.2.7 cleaning the window glass: prepare a glass scraper, a bucket of clean water and detergent, and clean the glass doors, windows and mirrors according to 4. 1.4, once a month;

4. 1.2.8 patrol and check the sanitation inside and outside the corridor, and clean up the advertising paper and garbage in time.

4. 1.3 roof, canopy cleaning and platform of the house

4. 1.3. 1 Prepare tools such as ladders, woven bags, brooms, garbage shovels, safety belts and helmets;

4. 1.3.2 stabilize the ladder. One person is standing on the ladder, and the other is wearing a helmet. Fasten your seat belt and climb up the canopy along the ladder. First, clean up the garbage in the canopy or rooftop, put it into woven bags, lift it down once a month and pour it into the trash can.

4. 1.3.3 dredge the drainage holes of the canopy and ceiling with iron bars to avoid water accumulation.

4. 1.4 Cleaning of glass, doors, windows and mirrors

4. 1.4. 1 First, remove the dirt on the glass edge with a shovel;

4. 1.4.2 Dilute the glass cleaner with water in a proper proportion;

4. 1.4.3 Wrap the towel soaked in glass water on the glass scraper, then press it on the glass with proper force and scrape it vertically from top to bottom;

4. 1.4.4 Take off the towel and scrape the water off the glass with glass;

4. 1.4.5 Wash and scrape continuously. When the glass is close to the ground, the scraper can move laterally;

4. 1.4.6 Wipe the water drops on the glass frame with a lint-free towel;

4. 1.4.7 finally, mop up the sewage on the ground;

4. 1.4.8 When cleaning high glass, the glass can be scraped on the telescopic rod.

4. 1.5 Cleaning of lamps and lanterns

4. 1.5. 1 Prepare tools such as ladders, screwdrivers, rags and plastic buckets;

4. 1.5.2 Turn off the power supply, set up a ladder, stand on the ladder, hold up the lampshade in one hand and a screwdriver in the other, loosen the fixing screws of the lampshade and take off the lampshade. Please ask the engineering department to cooperate when necessary;

4. 1.5.3 first wipe the stains and bugs in the lampshade with a wet rag, and then dry the water with a dry towel;

4. 1.5.4 Install the wiping lampshade, tighten it with a screwdriver and fix the screws;

4. 1.5.5 When cleaning fluorescent lamps, first turn off the power supply, remove the cover plate and lamp tube, and then wipe the lamp tube, lamp and cover plate with rags respectively and reassemble them.

4. 1.6 Stainless steel maintenance

4. 1.6. 1 Wipe the stainless steel surface with a solution mixed with neutral detergent;

4. 1.6.2 Wipe the water drops on the stainless steel surface with a lint-free towel;

4. 1.6.3 pour a small amount of stainless steel oil on the lint-free towel and wipe it along the stainless steel pattern;

4. 1.6.4 If the surface area is large, spray it on the stainless steel surface with a manual spray gun, and then wipe it with a lint-free towel.

4. 1.7 carpet cleaning

4. 1.7. 1 cleaning and maintenance

Vacuum once a week; If there are oil stains, water-soluble stains and chewing gum on the carpet, you can use detergent to remove water-soluble stains, degreaser to remove oily stains, and scraper to scrape chewing gum.

4. 1.7.2 Regular cleaning (once a month)

A. Install the carpet brush, and then put the carpet water into the water tank (floor washer);

B, controlling the switch of the water tank to evenly sprinkle water on the carpet;

C. Control the direction of the machine, from left to right, preferably slowly;

D. Uplink and downlink must overlap each other by about10 cm;

E. Scrub the corners of the carpet with a brush to wipe off the foam;

F. Absorb the moisture in the carpet with a water absorber, open the doors and windows, and keep the fan well ventilated;

G clean the water tank and carpet brush with clean water and put away the tools.

4. 1.8 ground waxing

4. 1.8. 1 Waxing notice board on site;

4. 1.8.2 Lift the frame and cover it with a black fiber pad;

4. 1.8.3 Prepare waxing water and put it into the water tank of the multifunctional washing machine;

4. 1.8.4 Start the machine, pull the control lever of the water tank, and spread the waxing water evenly on the ground;

4. 1.8.5 control the machine direction and walk back and forth from left to right for 2-3 times;

4. 1.8.6 The uplink and downlink should overlap about10 cm;

4. 1.8.7 After five minutes, use a water absorber to absorb the wax water and old wax stains;

4. 1.8.8 Drag it twice with a wet mop and once with a dry mop;

4. 1.8.9 Dry the ground with a hair dryer;

4. 1.8. 10 spread the bottom wax evenly on the ground with a wool mop;

4. 1.8. 1 1 Apply every 30 minutes (2-3 times);

4. 1.8. 12 Dry the floor with a hair dryer;

4. 1.8. 13 polish the floor with a polishing machine.

4. 1.9 wall waxing

4. 1.9. 1 Remove the old wax and sundries on the ground with a shovel;

4. 1.9.2 Wash it from top to bottom with water stained with detergent;

4. 1.9.3 Wipe the wall with a towel without plush and dry it;

4. 1.9.4 Apply a little solid wax to the cleaning cloth and apply it to the wall with slight force;

4. 1.9.5 Wipe hard with another cleaning cloth to achieve polishing effect.

4. Maintenance of1.10 pickled noodles

4. 1. 1. 1 daily maintenance

Put the dust on the dust pusher, or dip the mop with a neutral cleaner such as chlorine water to wipe off the dust and stains on the ground, and then polish it with a polishing machine.

4. 1. 10.2 week maintenance

A. After the neutral detergent is mixed with clean water according to the ratio of 1:20, gently wipe the floor with a floor washer and scouring pad;

B. Mix one part of wax water for maintenance with four parts of clear water. Coated on the wax surface;

C, after drying, polishing the ground with a polishing machine.

4. 1. 10.3 month maintenance

A. Mix a portion of detergent with water according to the ratio of 1:20, and gently wipe the floor with a floor washer and a cleaning pad;

B, sucking sewage with a water suction machine, then cleaning with clean water, and adding a layer of thermoplastic wax water after drying;

C, polishing the wax surface with a polishing machine after the wax surface is dried.

4. 1. 1 1 crystal plane treatment:

4. 1. 1 1 crystal plane treatment is generally only applicable to marble and granite;

4. 1. 1 1.2 crystal plane treatment can be divided into two types:

A. crystal hardening treatment;

B. crystal surface treatment.

4. 1. 1 1.3 crystal hard working method:

A. Sprinkle marble crystal hard powder (about 6g/m2) on the ground and spray 3-6 times of water;

B, polishing horizontally with a machine with a red pad, and evenly coating the crystal liquid powder, and going back and forth for about 10- 15 times;

C, grinding the crystal hard powder into slurry;

D, cleaning the slurry with a water-absorbing agent;

E Replace the new red pad with "stone maintenance liquid" and polish it again, and the ideal effect can be achieved.

4. 1. 1 1.4 crystal plane treatment method:

A. Clean the ground where crystal faces need to be made, and keep it clean without water;

B, evenly spreading K2 crystal face liquid on the floor (2g/m2);

C, grinding back and forth with a crystal plane weighing machine and a No.2 steel wire brocade pad until K2 crystal plane liquid is completely dried;

D, after completing K2, sprinkling K3 crystal face liquid on the ground, and re-polishing with a machine;

E generally, you only need to do K2 3 times and K3 2 times along the ground to achieve the ideal effect;

F. According to different needs every day, do daily cleaning and regular cleaning to keep the surface clean;

G. 2-3 times a week, polishing with stone maintenance liquid and red pad;

H. For places with serious wear, it is necessary to do crystal hardening again.

4. Maintenance method of1.11.5 crystal plane treatment:

A, polishing and grinding K2 crystal solution with a machine and a No.2 copper wire pad every day until the crystal solution is dry;

It depends on the brightness of the stone surface. If the luminosity is not enough, it can be polished with K2 and K3.

4. 1. 1 1.6 Renovation:

A. Renovation treatment is generally done on the premise of crystal face treatment, which is only applicable to marble;

B Refurbished disks are divided into five models (50,200,500,1000,2000);

C) Put the refurbished tray under the machine, pull up the water tank from 50, and start the machine from left to right and from top to bottom;

D, repeating the above method until the ground is polished smooth.

4.2 Outdoor cleaning

4.2. 1 public * * * site and road cleaning

4.2. 1. 1 Sweep the peels, scraps of paper, silt and other rubbish in the middle of the road and public places with a long bamboo broom;

4.2. 1.2 Sweep the garbage into the trash can with a plastic broom, and then pour it into the trash can;

4.2. 1.3 Wash the polluted roads and sites with water;

4.2. 1.4 After the rain clears, use a bamboo broom to clean up the accumulated water and sediment on the road surface;

4.2. 1.5 outdoor cleaning is divided into two groups, and cleaning is carried out at 8:00-2 1:00;

The first group is 5: 00-7: 30, 8: 00- 12: 00, 15: 00- 18: 30.

The second group is from 5: 00 to 8: 00, 12: 00 to 16: 00, 18: 30 to 2 1: 00.

The second group, in addition to daily work, completed monthly work and liquidity work under the arrangement of the cleaning supervisor.

4.2.2 Cleaning of duty room and sentry box

4.2.2. 1 Prepare rags, plastic buckets (filled with water), glass scrapers, feather dusters, brooms, mops and other tools, as well as cleaning agents;

4.2.2.2 is cleaned from top to bottom and from inside to outside;

4.2.2.3 used a feather duster to sweep away the dust and cobwebs on the wall, and then swept away the dust on the tables and chairs;

4.2.2.4 wiped the floor with a broom, wiped the tables and chairs on duty with a wet rag, washed the rag, and then wiped the doors, windows and external walls of the sentry box;

4.2.2.5 wiped the tables, chairs, doors, windows and glass with a dry rag;

4.2.2.6 mopped the floor and aisle with a clean mop;

If 4.2.2.7 duty room has other office equipment, clean it at the same time;

4.2.2.8 cleaned the sentry box and wiped the brakes with a rag;

When 4.2.2.9 has stains, pour a little detergent and scrub with a rag.

4.2.3 Cleaning of Green Belt

4.2.3. 1 Carefully clean the peels, scraps of paper, stones and other rubbish on the grass with a bamboo broom.

4.2.3.2 picked up cigarette butts, cotton swabs, pebbles, scraps of paper and other small sundries that could not be cleaned with a broom into the trash can;

While sweeping the grass, 4.2.3.3 carefully cleaned up the litter under the hedge;

4.2.3.4 is cleaned by greening personnel once every morning, and the rest of the time is patrolled to keep it clean.

4.2.4 Cleaning of apron slope, drainage ditch and well

4.2.4. 1 Sweep the silt, peels, scraps of paper and other rubbish on the apron slope with a broom;

4.2.4.2 used a plastic broom to clean up the sludge, paper scraps and other rubbish in the drainage ditch, and pulled out the weeds growing in the ditch to ensure the smooth drainage ditch;

4.2.4.3 used shovels and wire brushes to remove stains and moss dripping from aproll slopes and wall air conditioners;

4.2.4.4 should be washed with detergent first, and then washed with clear water. Check it again, and carefully scrape the dirty places with a shovel.

Where there is dripping air conditioning in 4.2.4.5, scrub it once a week and clean the apron slope and drainage ditch more than three times a day according to the operation of 4.2.4.3 and 4.2.4.4 mentioned above.

4.2.4.6 packed his tools.

Cleaning of playground

4.2.5. 1 Prepare tools and cleaning agents such as rags, plastic buckets and brooms;

4.2.5.2 wiped the dust on the swing and seesaw with a rag;

4.2.5.3 poured a little detergent on the stain, wiped it with a rag, and then rinsed it with water;

4.2.5.4 used a broom to sweep the sand outside the bunker into into the pit, and at the same time cleaned the scraps of paper, peels and other garbage in and around the playground;

4.2.5.5 cleans the site three times a day and carries out circular cleaning.

Cleaning of parking lot

4.2.6. 1 Prepare tools and cleaning agents such as hoses, brooms, rubber brushes and garbage cans;

4.2.6.2 used a long-handled bamboo broom to sweep the garbage into piles;

4.2.6.3 shoveled the garbage into the trash can with a trash can;

4.2.6.4 found useless sundries and evacuated them to the garbage bin together;

4.2.6.5 connected the water source with a hose and thoroughly cleaned the ground. When he found oil stains and stains, he poured a little detergent on the stains, scrubbed them with a rubber brush, and then rinsed them with water.

4.2.6.6 cleans the drainage and sewers of the surrounding parking lots to ensure smooth drainage;

4.2.6.7 cleans once a day; Wash the ground with water twice a month.

4.2.7 Cleaning of sculpture decoration, publicity column and signs.

4.2.7. 1 Cleaning of sculpture decorations: prepare tools such as rubber brooms with long handles, rags, detergents and ladders. Clean up the dust on the decorations with a broom. People stand on the ladder and wipe it from top to bottom with a wet rag. If there is a stain, apply detergent to the stain, wipe it with a rag, and then clean it with water. Stainless steel decorations shall be operated according to the cleaning and maintenance of 4. 1.6 stainless steel. Clean once a month;

Cleaning of the publicity column in 4.2.7.2: Wipe the inside and outside of the publicity column with a rag, scrape the glass with glass, and clean the glass, door and mirror according to 4. 1.4. Clean once a month;

Cleaning of billboards and signboards in 4.2.7.3: When there is advertising paper, tear it off first, then wipe it from top to bottom with a wet rag, and then wipe it again with a dry rag. Clean once a week. Indoor signs are cleaned once a day.

Fountain cleaning

4.2.8. 1 Peacetime maintenance: ground cleaners use fishing nets to salvage and clean the floating objects on the fountain surface every day.

4.2.8.2 regular cleaning:

A. disconnect the power supply first when cleaning;

B, open the drain valve to drain water, and when the pool water is drained by one third, the cleaning machine enters the pool for cleaning;

C. Brush the pool tiles from top to bottom with a long-handled hand brush and a proper amount of detergent;

D wipe the moss and dirt on the surface of lamps, pumps, water pipes, nozzles and wires in the pool with a towel. When cleaning, do not swing the nozzle;

E. Drain the sewage in the pool and mop the bottom of the pool;

F, inject fresh water, add appropriate amount of copper sulfate to purify the water, and clean the ground stains around the pool.

4.2.9 Septic tank cleaning

A. use a dung suction car;

B, open the cover plate of the septic tank with an iron hook, and then stir up the impurity caking layer in the septic tank with a long bamboo pole;

C. Drive the car to the construction site and put the dung suction hose in the septic tank;

D, starting the switch of the dung sucking vehicle to suck dung until the caked dung in the septic tank is sucked up;

E cover the manhole cover of septic tank, and rinse the work site and all tools with clean water.

F once a year in principle. If the inspection is abnormal, it can be cleaned at any time;

4.2. Cleaning of10 garbage pool (box):

4.2. 10. 1 shovel the garbage in the pool into the cart, clean the remaining garbage with a broom, open the water valve, and rinse the pool with water once;

4.2. 10.2 sprinkle decontamination powder or washing powder on the tiles inside and outside the garbage pit and at the door of the garbage pit, and scrub the stains with a rubber brush;

4.2. 10.3 dredge the drainage channel of garbage pit and clean the surrounding cement surface;

4.2. 10.4 Open the water valve, thoroughly clean the inside and outside of the garbage pit with water, and scrub with a broom or rubber brush at the same time;

4.2. 10.5 Close the water valve, recycle the water pipe and lock the iron gate of the garbage pit;

4.2. 10.6 Cleaning of trash can or dustbin: After removing the garbage in the box, move the box to a place with water, rinse it with water first, then scrub the stains with a little decontamination powder, then rinse it with water and move it to its original place.

4.3 Office floor cleaning

4.3. 1 Time: 6: 30-1:00, 13: 00- 17: 30. Clean the office of the company leader. The contents include: desktop file arrangement, desktop wiping, file cabinet wiping, wall lamp wiping, glass wiping, wastebasket cleaning, water cup replacement, etc.

4.3.2 Clean the offices one by one:

4.3.2. 1 First, collect the garbage and sundries in each room in garbage bags;

4.3.2.2 then sorted out the papers, newspapers and office supplies on the table;

4.3.2.3 emptied the ashtray, wrung clean wet towels, and wiped the countertops, chairs, filing cabinets, doors and windows, flower pots, etc.

4.3.2.4 taipan tables and chairs should be cleaned and maintained with dry towels and Bellevue care agent;

4.3.2.5 vacuums the office carpet once a week.

4.4 Cleaning of public toilets

4.4. 1 Clean the public toilets before 8:00 a.m. and before 4: 00 p.m. 14:00 a.m., and clean them every two hours at regular intervals to clean up the ground garbage and accumulated water;

4.4.2 Open the doors and windows for ventilation, flush the urinal with water, and clamp out the cigarette butts and other sundries in the urinal;

4.4.3 Clean up the ground garbage, empty the garbage basket, put on a new garbage bag and put it back;

4.4.4 Pour the toilet cleaning water into the water spoon, immerse the toilet brush into the toilet to flush the urinal, and then rinse it with clear water;

4.4.5 Wash washbasins, marble countertops, walls, doors and windows with wet towels and cleaning agents;

4.4.6 After wringing the wet and dry towels, wipe the mirror glass, and then wipe it with a dry towel;

4.4.7 Clean the ground with a wet mop, and then dry it with a mop;

4.4.8 Spray a proper amount of perfume or air freshener, and put mothballs in the urinal;

4.4.9 Wipe the lamps and lanterns with a dry towel once a month and clean the ceiling once.

4.5 Garbage removal of garbage transfer station

4.5. 1 8 every morning; 00 and 16:00, the construction waste will be collected every hour outdoors, loaded and transported to the garbage transfer station;

4.5.2 Clean the ground and walls of the transfer station;

4.5.3 Wash the passage outside the transfer station and the ground with water, and brush the oily places with detergent or detergent: wash the garbage in the drainage ditch with water after fishing;

4.5.4 Disinfect the garbage transfer station and its surrounding10m area with sprayers and disinfectants;

4.5.5 Clean the tool room of the garbage station, clean the walls with a clean broom, clean the ground garbage, and wipe the doors, windows and tool racks with a wet rag;

4.5.6 The tool room of garbage station should be cleaned once a week.

4.6 In addition to the "four pests" work

4.6. 1 disinfection

4.6. 1.65438+

4.6. 1.2 Disinfect trash cans, garbage transfer stations, toilets, garages and sewers once a week.

4.6.2 Problems needing attention in disinfection activities

4.6.2. 1 Use disinfection products with high efficiency and low toxicity, prepare it in proportion, and spray it on the disinfection site with backpack sprayer. Precautions should be taken when spraying, such as wearing long clothes, trousers and masks, changing clothes and washing hands with soap after finishing;

Disinfection of the lobby and floors in 4.6.2.2 is generally carried out during non-office hours. Under special circumstances, if it needs to be done during office hours, it must be approved by the customer service department first.

4.6.2.3 tries to spray the periphery of the square in the downwind direction to reduce direct contact with pedestrians;

According to the actual needs, 4.6.2.4 can increase the number of spraying and pay attention to the timely removal of dead pests;

4.7 Standard Operating Procedures for Machines and Tools

Floor wiper

The floor wiper is mainly used for hard floor cleaning or floor polishing, and it is one of the indispensable cleaning equipment in buildings. There are single-chip and multi-chip types.

4.7. 1. 1 operating rules

A. Install the floor brush and the dial, and rotate the floor brush and the dial in the direction of the needle;

B, injecting clean water and detergent into the water tank, and adding water in proportion;

C. Plug in the power supply, press the adjusting switch, and adjust the handle bar to a height suitable for you;

D operate the machine from the place closest to the power socket to prevent the machine from being pressed by wires.

4.7. 1.2 Precautions

A. When working, it is necessary to prevent the brush from touching the wire, so as to avoid the power cord from being caught in the brush;

B. When starting the floor wiper, the power cord should be behind the operator;

C. When using cleaning agent, be careful not to let water wet the motor;

D. After using the equipment, don't leave the handle casually, loosen the joystick, cut off the power supply after the machine stops completely, and remove the floor brush and dial.

4.7. 1.3 maintenance work

A. clean the fuselage and accessories after use;

B clean the machine and wires with a clean cloth and hang the wires around the machine. The machine must be stored in a dry place.

vacuum cleaner

Vacuum cleaner is a special equipment for vacuuming flat parts such as floors, carpets and walls, and it is one of the commonly used equipment in cleaning work.

Operating rules

A. connect the hose to the fuselage and plug in the 220v power supply;

B. Press the switch button at the top when starting;

C. When sucking the hard floor, extend the brush of the suction nozzle, and when sucking the carpet, extend the brush into the suction nozzle.

Matters needing attention in 4.7.2.2

A. Before using the vacuum cleaner, check whether the dust in the machine has been removed;

B. After using the vacuum cleaner, check the dust bag. If it is full, use another vacuum cleaner to suck the dust inside and outside the dust bag.

C. Dry vacuum cleaner, do not inhale moisture into the machine.

4.7.2.3 maintenance work

A. After use, cut off the power supply, remove the hose and pipe clamp, and hang the wound wire on the fuselage shell;

B loosen the hose and roll it into a roll, or hang it on the wall.

Water absorber

Water suction machine is specially used to remove stagnant water, including disposable water suction machine and vacuum water suction machine, and its construction principle is the same as that of vacuum cleaner.

Operating rules

A. connect the hose to the fuselage and plug in the 220v power supply;

B. Use a suction scraper with soft glue when sucking the floor, and use an iron scraper to absorb water when sucking the carpet;

C. if the pump is full of water, it will make different sounds.

Matters needing attention in 4.7.3.2

A. Before using the water absorber, check whether the machine is full of water;

B. After using the water absorber, pour out the sewage, clean it with clean water, and then wipe it with a dry cloth;

C. If the machine inhales acid cleaner, please clean it immediately after use to avoid rust.

4.7.3.3 maintenance work

A. After using the machine, cut off the power supply, remove the hose and handle, then wind the power cord and hang it on the nose shell;

B. The filter in the water absorber should be disassembled and cleaned;

C maintenance wax for stainless steel shell of fuselage.

4.7.4 High speed grinding machine

High-speed polishing machine is specially used for floor polishing, and its construction principle is the same as that of floor wiper. High-speed polishing machine makes the brush plate and the ground rub softly through high-speed rotation, achieving the effect of polishing machine, which is suitable for polishing flat and hard floors such as marble, granite and wood.

4.7.4. 1 operating rules

A. Before polishing, wipe off the waste on the flat surface, and wet wipe off the sand and gravel;

B. Check whether the polishing brush is clean and needs to be replaced;

C. Check whether the control device for adjusting the machine speed is in the normal machine speed position;

D. Turn on the power supply, and the operation should start from the nearest power socket. The walking route should be straight, and the ground polished at the back should overlap the ground polished at the front.

Matters needing attention in 4.7.4.2

A. Don't drive too fast during working hours to avoid collision;

B. Do not clean the floor with flammable liquid or operate the machine in explosive air;

C. When operating the machine, don't lift the machine, which will lead to the machine losing control;

D the machine must be kept indoors to avoid getting wet by rain and snow, and never spray any liquid on the machine;

E. Don't press anything on the machine, because it has precise balance;

F the grounding wire must be connected to the switch box and the motor, and the wrong connection will lead to electric shock.

4.7.4.3 maintenance work

Clean the surface of the machine with a clean cloth after each use, and polish it with an unused cloth when not in use.

B. Put the gasket under the transmission plate and disconnect the machine;

C. check whether the vent hole on the motor cover is clear. If there is a lot of dust, you must remove the motor housing and use a vacuum cleaner to remove the dust.

hair dryer

Hair dryer, also known as hair dryer, is mainly used for carpet cleaning and drying or floor waxing.

Operating rules

A. First, remove all the furniture in the room and lift a corner of the carpet;

B. Adjust the position of the air outlet towards the carpet or floor to ensure that the built-in net cover is not sealed;

C. Insert the plug connected to the ground wire into the power socket, turn on the switch, and let the air blown by the fan pass above and below the carpet to speed up the drying process.

D. When drying or carding carpets, the direction of the fan must be constantly adjusted.

Matters needing attention in 4.7.5.2

A. Don't operate the machine in water;

B. Do not operate the machine when the grille and net cover of the machine are damaged;

C. Don't insert anything outside the machine;

D. All parts of the human body and clothes leave the open exterior and the operating part of the fuselage;

E. someone must be present when the machine starts. When the machine is not in use, the power supply must be cut off. You must turn off the machine first and then unplug it.

F don't operate the machine in a flammable and explosive environment.

4.7.5.3 maintenance. Regularly lubricate the bearings and clean the built-in net cover and air outlet grille;

4.7.6 High pressure water gun

High-pressure water guns are mainly used to clean exterior walls, glass, square floors, cars, plastic carpets and so on. The high-pressure water gun is pressurized by the motor, so that the water gun sprays high-pressure water and cleans the surface of the object.

Operating rules

A. connect the water pipe to the fuselage, then connect the water pipe to the faucet and plug in the 220v power supply;

B. start the power switch of the fuselage;

C. rinse the planned place;

4.7.6.2, watch the rules.

A) Check whether the machine and water pipes are damaged before use;

B) After use, the water in the water pipe must be drained.

4.8 Record filling

4.8. 1 Arrange important tasks, and the cleaning supervisor shall fill in the Cleaner Post Arrangement Form;

4.8.2 After each stone maintenance, the person in charge of the post shall fill in the Stone Maintenance Record Form;

4.8.3 After cleaning the toilet every time, the post needs to fill in the toilet cleaning record;

4.8.4 Disinfection shall be completed by the cleaning personnel designated by the cleaning supervisor.

4.8.5 Each post shall fill in the Quality Record of Garbage Removal Service.

4.8.6 The cleaning supervisor shall supervise aerial work on site and fill in the Aerial Work Record Checklist.

4.9 inspection

4.9. 1 The cleaning supervisor shall check the cleaning work at least twice a day and fill in the Daily Cleaning Work Record Checklist;

4.9.2 The department manager shall check the cleaning and hygiene work at least twice a month and fill in the monthly cleaning and hygiene work checklist;

4.9.3 After each disinfection, the supervisor of the Ministry of Environment and Health shall make an inspection and fill it in the Disinfection Work Record Checklist.

Reference property management network

/gywygl