The removal method of stubborn stains on the ground is difficult to clean up in the face of many common stains, which makes people feel deeply headache. In fact, we can use some techniques to help us clean up. The following is the removal method of stubborn stains on the ground.
Removal method of stubborn stains on the ground 1 method 1: use household cleaner.
1 Gently wipe the stain with 3% hydrogen peroxide. Hydrogen peroxide is a powerful chemical cleaner, which is highly oxidizing even after dilution, so only a small amount is enough to remove stains. It is slightly corrosive, so the surface should be thoroughly cleaned with tap water immediately after the stain disappears.
If the stain is particularly difficult to remove, you can spread a rag soaked in hydrogen peroxide on it. Wait 1 to 2 hours. Then take away the rag and continue to scrub the stains. Before using this method to remove stains in conspicuous places, try it in inconspicuous places to ensure that it will not damage the floor tiles.
Hydrogen peroxide is particularly effective in removing coffee stains, nail polish and blood stains from ceramic or decorative floor tiles.
Hydrogen peroxide is similar to bleach.
Chemicals, so before using any other cleaning spray or solvent in the kitchen, you should thoroughly scrub the floor tiles with water to remove all residues.
Dilute bleach with cold water to remove deep or organic stains. Fill a bottle of bleach, pour it into a bucket of 3.8 liters of cold water and mix well. Then soak a piece of white cloth in the solution and wipe off the stain. If you find that the solvent concentration is not enough, fill a bottle of bleach and try again, but be sure to pay attention to the amount added, because bleach may cause great harm when it comes into contact with other items other than stains.
Bleach is especially effective for ink, coffee, juice and blood stains. All stains that are difficult to remove by ordinary methods can be basically wiped off with bleach.
Many people are biased against bleach because it will react with other detergents, especially those amino solvents. Before using any other cleaning agent on the floor tile, please make sure that the bleach has been rinsed clean, and wait for a few hours for the floor tile to dry completely.
Use decontamination powder
Scrub and remove liquid stains from the floor. Wet the stain on the floor tile slightly with water, and then sprinkle enough decontamination powder on it to completely cover the stain. Add water and stir gently to turn the washing powder into a paste, and wait for a few minutes for the paste to react with the stain. Then, wipe the stain with a scrubbing sponge or rag.
Cleaning powder can effectively clean common floor stains, such as oil stains, food stains, water stains and so on.
If you want to try another decontamination method, first dry the area thoroughly and clean it with water, because some chemicals in the decontamination powder will have adverse reactions with other cleaners.
Mixing borax with water can remove stains on floor tiles. Borax is a popular laundry detergent, but it is also very effective in cleaning the kitchen. Mix 400 grams of borax with 59 ml of water, dip a little solvent in the scrubbing sponge and scrub the stained floor tiles until they are clean. If the stain is particularly stubborn, you may have to work hard.
Borax can only be used on decorative floor tiles such as pottery, porcelain and marble.
50 grams of borax is mixed with 3.8 liters of water to prepare a solvent suitable for mopping the floor, which can prevent the formation of stains from the source.
If other cleaning methods fail, buy marble slurry coating agent to clean marble floor tiles. Directly mix the mud with a thickness of about 0.6 cm onto the stain, cover the area with plastic, and let it stand for 1 to 2 days. Wipe off the paste and see if the stain has disappeared.
The structure and composition of marble floor tiles are different from other floor tiles. Although bleach and hydrogen peroxide are usually effective, marble slurry dressing is the most suitable cleaning agent.
If the stain is not absorbed, mud dressing can be applied again as needed.
. If the stain is particularly deep, let the mud dressing stand for more than 1 day.
Method 2: Try natural solvents.
Pour soda water on the stain and wait for a while to remove the stain containing sugar or fat. Choose tasteless, sugar-free soda water, water and carbonic acid are enough to decontaminate. Pour enough soda water on the stain to make a pool and wait a few minutes for it to react. Carbonic acid can effectively peel off stains, so just wipe off all the residual liquid and wipe off the stains with a scrub sponge.
Soda water is the most effective for cleaning oil stains and fat stains, but it can also effectively clean sugar stains and sugar stains, such as spilled soda water.
2 Use white vinegar to remove the stains on the seam of floor tiles. Pour a proper amount of white vinegar on the scrub sponge and wipe it hard along the seam of the floor tile to remove dirt and black residue. Do not mix vinegar with baking soda or any other detergent, otherwise it will destroy the cleaning effect of the two components. If the area is still dirty, wipe off the vinegar with water and try other cleaning methods.
White vinegar is very suitable for cleaning the joints of floor tiles, but it also has a good effect on cleaning daily-use ceramics such as bathtubs, toilets and sinks. White vinegar is especially useful in removing water stains formed by hard water.
Be sure to use high concentration vinegar to maximize its cleaning effect. Look for high concentration vinegar in the cleaning products area, because vinegar is usually not strong enough.
When cleaning non-ceramic floor tiles, choose a mixture of baking soda and water. Ceramic, marble and other floor tiles with topcoat are also easy to clean by other methods in this paper, but floor tiles without glaze such as slate must be cleaned with a mixture of baking soda and water. Pour baking soda and water into a bowl according to the ratio of 3:/kloc-0:, stir it into a paste, and then wipe it on the stain with a toothbrush.
It is best to clean tiles with baking soda and water, because they will not leave traces, which will be washed off on tiles or other glazed tiles, but cannot be removed on slate.
Baking soda is effective for cleaning small sticky stains, but a little effort can also effectively remove large stains.
After washing with baking soda, it is normal for the surface to be white and shiny. To avoid this, please carefully clean the area and wipe it with a clean rag for 2 or 3 times.
Spray lemon juice on the hard water stains of decorative floor tiles. Lemon juice is very acidic and can easily remove hard water stains on decorative floor tiles. Spray lemon juice directly on the water stain, or scrub the area with a rag or sponge dipped in lemon juice until the water stain disappears.
Lemon juice can only be used for decorative floor tiles such as pottery or porcelain, but not for stone or slate floor tiles, because acid will leave indelible marks on such floor tiles.
Method 3: Remove sticky stains with ice.
Fill the plastic bag with ice cubes and put it on the stain formed by wax, chewing gum or tar. Fill a sealed plastic bag the size of a stain with ice cubes. Most small stains only need a sandwich bag, and large stains may need a fresh-keeping bag to cover the whole area. Freeze the ice cubes in advance, so that the plastic bags are full and the stains on the floor tiles are removed, so you won't be in a hurry.
This method is only effective for sticky stains left by tar, wax and glue. Because ice will harden these stains and make them easier to shovel off. Don't try to deal with liquid stains in this way, or you will be disappointed.
Facts have proved that liquid nitrogen can effectively remove sticky stains, but it may be difficult to use in fine work and may damage floor tiles, so it is better not to use it.
After the stain has solidified, scrape it off with a wooden stick. After half an hour arrives at 1 hour, take away the ice pack and check whether the stain is solidified. If the cure is successful, shovel it off with a stick such as a popsicle. If you can't remove all the stains at once, don't worry, just try to shovel off the protruding solid parts on the floor tiles.
Don't use metal bars
Or ceramic rods, because it will scratch the floor tiles and cause new aesthetic problems. In the same way, a metal pot is best matched with a wooden spoon.
3 Remove all residues with paint thinner. With a rag dipped in a little paint thinner, you can wipe off all the stains on the floor tiles. You may find that scrub sponge can effectively remove stains, but be sure to buy a sponge suitable for floor tiles instead of steel balls.
You can buy paint thinner at any tool store or hardware store.
If the stain can't be scraped off, you can use the ice pack for an extra hour and try again, because the temperature of chewing gum, wax or tar may have risen and returned to viscosity.
skill
Different decontamination methods will have different effects. Don't give up just because a cleaning method is ineffective for stains. Before proceeding to the next step, make sure that the powder and solvent in this area are thoroughly removed.
Remove stubborn stains on the ground 2 floor cleaning
White vinegar+baking soda
White vinegar and baking soda are the strongest partners to deal with oil pollution. As long as they are there, they are not afraid of any oil pollution and make the floors and tiles at home spotless.
Mix 30ml vinegar, 20g baking soda and 1L water evenly, then add a small amount of detergent, and then scrub the floor with the mixed solution, which can not only easily remove dust, but also effectively remove oil stains.
Using this cleaner to clean the floors of kitchens and restaurants has achieved remarkable results. Compared with mopping the floor, you can clearly see that the floor is much brighter and there is no fog.
Fabric softener
Finally mopped the floor, want to keep it longer? Just add some fabric softener.
When scrubbing the floor with a mop, it is easy to generate static electricity, and it is easier to absorb dust where it has just been cleaned. Pour a small amount of clothes softener into the water that sweeps the floor, which can reduce the friction of mop fibers and prevent static electricity.
Moreover, some active ingredients added in the softener can form a protective film on the floor, so that the floor is not easy to accumulate dust! Just mop the floor once and you can keep it clean and tidy for a week.
White vinegar+softener+water
Pour a little clothes softener into white vinegar water, which can not only clean, but also form a protective film on the floor. The floor is not easy to accumulate dust, and can be cleaned for several days at a time.
lemon juice
Nicotinic acid and organic acid in lemon juice have strong bactericidal effect. When mopping the floor, add lemon juice or lemon essential oil to the water, which will get twice the result with half the effort.
You can also mix lemon juice, olive oil and water to make a cleaner. Can be used for daily household cleaning, not only fragrant and pleasant, but also can remove oil and dust. With this universal cleaner, you don't have to worry about cleaning any more.
Cleaning the solid wood floor with lemon juice and olive oil can maintain the floor, prevent the floor from cracking, kill mold and make the floor as bright as new.
Eliminate floor scratches
White vinegar+lemon juice+olive oil
Is it difficult to deal with the scratches on the table feet and stool feet on the wooden floor? Don't worry, mix white vinegar, lemon juice and olive oil to make a bottle of wood floor maintenance cleaner.
Pour a little on a cotton pad or a clean rag and rub it on the wooden floor. Scratches and stains will be cleaned up quickly. Lemon juice and olive oil can also maintain the floor.
Restore floor gloss
tea boiled water
You can also use tea to keep the luster of the wooden floor. After drinking tea bags, tea leaves can be reused to clean floors or wooden furniture. , can be polished shiny.
Eliminate floor chewing gum
ice bag
If you accidentally stick the chewing gum on the floor, you can put an ice pack or frozen items on the chewing gum and wait for a few minutes.
Then you will find that the chewing gum is frozen hard, which can be removed by a slight scraping, and the accumulated oil stains on the floor can also be removed in this way.
Removal of stubborn stains on the ground 3 First, we need to prepare a bag of alkali and then mix it with some water. Then pour the alkaline water on the greasy floor tiles and wait for half an hour. After that, we mop the alkaline water clean, and we can see that the greasy living room floor tiles are clean.
And it is worth noting that the more greasy the floor tiles are, the less powerful cleaning agents such as detergent can be used. Because such a cleaner will destroy the glaze layer on the surface of the floor tile, which is very bad.
How to mop the tile floor?
1. We need to clean the floor before mopping the floor. We can use a vacuum cleaner or broom to sweep away some dust and rubbish that can be seen by the naked eye. In this way, it will be very convenient for us to mop the floor, so we don't have to worry about mopping it cleanly.
When we mop the tile floor, we can drag it from the corner to the outside first. Because in the order of mopping the floor, if you drag it outside first, you will still step on it, and then you will have to drag it again, which will get twice the result with half the effort. We can add some conditioner to mop water, because with conditioner, the ground will become very bright and it is not easy to be contaminated with dust.
When we finish dragging a room, we need to open all the doors and windows of the room for ventilation, so that clean air can come in, the floor will be easier to dry, and the dust in the room will be taken away.