The kitchen needs a fire door. Fire door is an important part of fire fighting equipment, which can prevent the fire from spreading and smoke from spreading in case of fire, ensure the safe evacuation of personnel, and have corresponding standards for installation and use.

1. According to the Code for Fire Protection Design of High-rise Civil Buildings (GB51145-95), fire doors should be horizontal doors that open in the evacuation direction, and can be manually opened from any side after being closed.

2. According to the Code for Fire Protection Design of Buildings (GB51116-2116), the evacuation doors of civil buildings and factories should be opened in the evacuation direction. Except for Class A and Class B production rooms, when the number of people in rooms is not more than 61 and the average number of people evacuated from each door is not more than 31, the door opening direction is not limited. Expand data

1. Strictly implement the management regulations of liquefied gas stoves and diesel stoves to ensure that the stoves are used in good condition.

2. Gas cylinders shall not be stored in inhabited rooms or densely populated places, and the distance between the cylinders and the stove shall not be less than 1.5m..

3. Check all parts of the stove regularly. If you find problems such as valve blockage, failure and aging of rubber hose, you should immediately stop using it for repair. If you find the smell of liquefied petroleum gas in the room, you should immediately turn off the stove switch and angle valve, cut off the gas source, open the window in time, and it is strictly forbidden to smoke, ignite or start the electrical switch around. Soap water can be used to check dew point, and it is forbidden to use open flame to test leakage. When replacing liquefied gas tanks, foam water should be used for safety inspection, so as to eliminate potential safety hazards in time.

4. When the stove is ignited, it is necessary to open the angle valve first, then strike a match, and then turn on the stove switch. If it is not lit, turn off the stove switch, and then re-ignite it after the oil and gas diffuse.

5. Turn off the switch and angle valve of the stove after using the fire, so as to avoid gas overflowing due to aging, cracking, falling off or being bitten by rats. If problems are found, repair them in time.

Baidu Encyclopedia-Code for Fire Protection in Architectural Design