Wall Crystal Light Box unique visual effect. In recent years, Wall Crystal Light Box is also rapidly developing. However, Wall Crystal Light Boxes need to be installed correctly before showing its good advantages, so the following mini-series will explain how to install Wall Crystal Light Boxes.

What are the steps to install a wall crystal light box?

First of all, fluorescent tubes usually use fluorescent tubes T4 or T5 wrapped in a reflective film on both sides of the uniform plate. For ultra-thin light boxes with small-sized light guides, you can ask the manufacturer to provide LED rigid strips that usually have SMD type and straw hat type. And the ballast and lamp positions are reserved. The final surface of the homogenized plate is polished.3. Shine the light on the light guide plate, add transparent plexiglass panels, cover the outer frame, and fix the frame to make the light plate ultra-thin.4. Apply double sided tape around the perimeter of the light protection plate and install reflective film on one side of the light protection plate. Usually, the reflective film is made of white PET reflective film and high gloss photo paper can also be used.5. Connect the ballast and place the lamp, light guide and ballast in the lower frame of the light box. The frame of the light box can be opened for future bulb replacement. The frame can be made of aluminum alloy, wood, stainless steel, plastic, etc.. The appearance is based on your own preference.

What should we pay attention to the wall crystal light box?

1. Pay attention to the stability. The shape of the glass lamp is more complex, many accessories, weight is not light. When installing, not only should consider the load capacity of the upper surface, but also consider the stability of the back plate and the light disk. All types of screws used to fix the glass lamp should be tightened, especially the expansion screws against the back bar and the lamp plate. Be sure to tighten them completely to prevent the bulb from swinging. In addition, the load capacity of the nut carrying the entire fixture must match the total weight of the glass lamp or it will drop due to insufficient load capacity.2. Be aware of power outages. Be sure to disconnect any fixture before installation, especially when connecting cables and installing bulbs, to avoid the danger of electric shock and jeopardize life safety.3, fittings should be lightly loaded. The crystal balls or glass wires in glass luminaires are usually synthetic. Although not as hard as natural glass, they are not easy to use. However, if the accessories have glass tubes, special care is needed when stringing and fixing them. Be careful not to damage the glass tube.4. Pay attention to height. Hanging glass lamps should be installed with attention to the height of the lamp. Since glass lamps usually have crystal pendants, these pendants will extend the volume of the lamp vertically. If the installation height is too low, not only will you feel the pressure, but the light will be uncomfortably bright and the pendant will hang. There may also be safety issues. Equivalently, do not choose too long a pendant for decoration.

The above is about Wall Crystal Light Boxes some of the problems, you look down.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~