Wall-hung boiler heat preservation water tank is a common equipment in modern families, and some details need to be paid attention to when installing. The installation method of heat preservation water tank of wall-hung boiler is introduced below.

Equipment preparation: Some tools and equipment, such as screwdriver, wrench, ruler, Gang Qian, pipe, gas leakage detector, etc., need to be prepared to install the heat preservation water tank of wall-hung boiler.

1. Installing the wall-hung boiler: When installing the wall-hung boiler, first connect the water pipe and gas pipe to the wall, and then clip the wall-hung boiler into the bracket.

2. Install the water tank: put the water tank in a suitable position, connect the inlet and outlet pipes, install the hot water pipe first, and then install the cold water pipe. Be careful not to put it backwards.

3. Connect the water pump: Connect the water pump to the water tank to ensure that the direction of the water pump is correct.

4. Connecting pipes: pipes connecting water tanks, wall-hung boilers and water pumps, and pay attention to ensuring sealing performance when connecting.

5. Wire connection: Connect the wires and protect them with conduit.

6. Installation of gas leak detector: Install the gas leak detector in a proper position and ensure that it can detect gas leakage.

7. Debugging: After all the equipment is connected, it needs to be debugged to ensure the normal use of the water tank.

8. Check the safety performance: Before the formal use, the whole equipment needs to be checked to ensure its safety performance.

The above is the installation method of heat preservation water tank of wall-hung boiler. It should be noted that care should be taken during operation to ensure safety.