as far as porch decoration is concerned, it is a hollow partition. It is also recognized by everyone, because its decoration is also very effective, but at the time of design, it is also necessary to understand it, so as to protect our decoration. Let's take a look at how to design the hollow partition of the porch. This will make the design more reasonable when we design. Give us a comfortable feeling.

1. How to design the porch hollow partition

1. From the design point of view, be familiar with the designed drawing route, and take it into account according to the requirements of the drawings. Mark the wall, and mark the porch hollow partition horizontally, vertically and accurately. Wooden mortises should be punched at the top and bottom of the wall, which are mainly used for fixing, to ensure the stability of the wooden partition in the later period. The concave-convex part should be connected by concave-convex method, and the general depth is about 51 mm. It is forbidden to punch wooden mortises in the bathroom or on the roof to ensure safety.

2. The stability of the dragon skeleton can't be ignored. Generally, it is necessary to add a dragon skeleton to meet the needs of heavy objects. It must be understood that fire-proof and anti-corrosion coatings should be painted before the dragon skeleton is fixed, one for fire prevention and anti-corrosion, and the other for completely covering the keel. A 3-5mm notch should be left between the gypsum board at the end of the hollow lattice partition and the surrounding wall or column. During construction, caulking paste should be added to the notch first, and then the board should be laid.

3. When designing, it is necessary to know that the caulking paste is squeezed to make it closely contact with the adjacent surface layer to prevent the later sealing phenomenon. The cleaning work at the later construction site will clean up the sundries at the track notches, so that the later hollow movable partition can run freely, with high utilization rate and high environmental protection coefficient. Usually, the entrance porch is partitioned by decorations such as screens and cabinets, which not only pays attention to the decorative effect, for example, embedding the wardrobe into the wall.

2. What should be paid attention to in partition installation

1. First of all, if the house is the door type or the living room type, it must be clear that we can use the porch cabinet to distinguish the living room. The style of the porch cabinet should be consistent with the style of the living room, and the isolated porch space should not be too large to avoid looking incongruous. We can also set a low wall as a partition, and then set a card holder under the low wall, and some shoes can be placed under the seat. If you need to enter the living room through the aisle after the event, we can design it according to our own needs in the aisle, and have the style of cabinets up and down, which is convenient for us to take care of makeup and storage.

2. What's more, when we design the porch partition, we should also understand and consider the size of the indoor space. For example, small-sized houses are more suitable for semi-hollow porch partitions, or we can choose some soft clothes as porch partitions to make the interior look more transparent. When we design a porch partition, we should consider its lighting condition. If the indoor lighting effect is not good, we'd better choose a soft porch or a semi-partition porch. The porch pattern we designed had better be auspicious, and the indoor style is inconsistent.

3. What's more, when designing the porch partition, we can put some potted plants as decoration. The color of the entrance partition should not be too fancy, and it is best to choose a light color. The floor of the entrance can choose a darker color, and the whole entrance should be clean and tidy.

how to design the hollow partition of the porch is introduced by Xiaobian, which will be of great help in our design and ensure our indoor comfort.