2. Gas consumption:
Gas: gas: 2.92 cubic meters/hour.
Liquefied gas: 0.98kg/h.
Natural gas: 1.2 m3/h
Electric heating: voltage: 380V, power: 6KW.
3. Material of the iron plate: the iron plate is made of alloy steel, and the thickness of the iron plate after heat treatment and surface grinding is 20mm, and the material does not deform or change color.
4. Exhaust requirements: the air volume is 2250m3/Hr/ set, and an external air duct with wind speed of 12m/s can be connected, depending on the specific situation. (Refer to the schematic diagram of air duct)
5. Internal structure:
A. main heating system: gas: gas burner of gas company. The temperature of teppanyaki is controlled by gas switch, and the main heating range is 500mm×500mm.
B. Thermal insulation system: The external area of the main heat is a thermal insulation system, and its temperature is controlled below 100 degrees, which is humanized and designed to avoid the safety hazards caused by customers' curious touch of iron plates.
C, fire protection system: the function of preventing open flames from entering the exhaust duct, and putting an end to potential safety hazards caused by open flames.
D, waste gas treatment system: make the waste gas in the equipment discharge normally.
E. Oil fume treatment system: The oil fume separation system inside the equipment can prevent the internal oil fume from entering the exhaust pipe and directly falling into the oil collection drawer.
6. The external decoration of the equipment can be decorated according to the decoration style and grade in the store, or it can be made by our company. The decorative table can be made of imported black gold sand marble or tempered glass (sprayed with gold sand on the back), and the periphery can be decorated with ebony or black walnut.