2. The purifier can be installed indoors and outdoors. For the purifier installed outdoors, please install a rainproof device above the machine to increase the service life of the machine. Maintenance space should be reserved around the purifier, and the cabinet door should be opened at a right angle of more than 90 degrees to facilitate future maintenance, cleaning and repair.
3. Before installation, it is best to electrify the machine for a trial period to check whether the electrodes of the machine will shift during transportation or handling.
4. The air inlet and air outlet of the machine can be interchanged at will, and there must be a filter in the direction of the air inlet.
5. The distance between the fume purifier and the outlet position of the exhaust hood should be at least 4m to ensure the fire safety and purification effect; The distance between the purifier and the fan is more than 2 meters, so it is best to install the purifier in front of the fan. If it is necessary to install a fan in front of the purifier, the outlet of the fan cannot blow directly at the purifier, otherwise the purification effect of the purifier will be affected. It is best not to have an elbow at the air inlet of the purifier.
6, equipment box must be safely grounded.
7. Connect the oil drain pipe.
8. Choose the matching fan air volume, which is generally equivalent to the treatment air volume of the purifier. The smaller the fan air volume, the better the purifier effect. When the fan air volume meets the requirements of kitchen ventilation, the wind speed passing through the purifier should be below 6 m/s.
9. The purifier is connected with the exhaust duct through the flange, and all the joints should be sealed to prevent oil leakage.
10, in order to ensure safety, the purifier requires linkage with the fan, that is, the purifier and the fan are turned on and off at the same time; If linkage is not possible, the fan must be started 10 minutes before starting the purifier, and the purifier should be turned off before stopping the fan when shutting down.