1, select
At present, there are generally two-point and three-point hinges, which can basically meet the use. Of course, a three-point hinge is better.
The steel used to make hinges is the most important. If the choice is not good, the door panel may lean forward and fall off after a period of time. The cabinet hardware of big brands is almost all made of cold-rolled steel, with perfect thickness and toughness.
In addition, try to choose multi-point positioning hinge. The so-called multi-point positioning means that the door panel can stay at any angle when it is opened, and it will not be laborious to open and will not suddenly close, which ensures the safety of use, which is particularly important for the door of the hanging cabinet. The positioning quality is related to the toughness of the reed used in the hardware, and the quality of the reed also determines the opening angle of the door panel. A good reed can make the opening angle exceed 90 degrees.
2. Slide rail
(1) function
The inside of the slide rail invisible to the naked eye is its bearing structure, which is directly related to its bearing capacity. At present, there are both steel ball slide rails and silicon wheel slide rails on the market. The former automatically removes the dust and dirt on the slide rail through the rolling of the steel ball, thus ensuring the cleanliness of the slide rail and not affecting its sliding function because the dirt enters the inside. At the same time, the steel ball can make the acting force spread around to ensure the stability of the drawer in the horizontal and vertical directions. The debris generated by the long-term use and friction of the silicon wheel slide rail is snowflake-like, which can be picked up by rolling without affecting the sliding freedom of the drawer.
(2) Choose
Drawer is an indispensable part of kitchen equipment, and slide rail is the most important accessory in the whole drawer design. Due to the special environment of the kitchen, it is difficult to push and pull the low-quality slide rail for a long time even if it feels good in the short term. When selecting, the drawer can be completely pulled out, and its structure and the specific structure of the contact part with the slide rail can be clearly seen from the bottom, and the thickness of the drawer side plate can also be observed.
3. Characteristics
Hinge is the most tested in the process of frequent opening and closing of cupboard doors. It must not only connect the cabinet and the door panel accurately, but also bear the weight of the door panel alone. It must also keep the appearance of the door in order and not deform. At present, most of the hinges seen on the market are detachable and divided into two parts: the base and the buckle. When choosing a cabinet, you can ask the salesperson to remove the door together with the hinge buckle and look inside the buckle.
Step 4 pull the basket
(1) function
Generally, baskets are made of stainless steel, chrome plated and painted. Pulling a basket can provide a large storage space, and the space can be reasonably divided by dividing the basket, so that all kinds of articles and appliances can be placed in the right place. According to different uses, the basket can be divided into stove basket, three-sided basket, drawer basket, ultra-narrow basket, advanced basket, corner basket and so on.
It is a good way to expand the use efficiency of cabinets by installing net baskets and net racks in cabinets. The owner can put the kitchen utensils and tableware in the net rack according to his own habits, and the hygiene is clear at a glance. The rotating grid makes full use of every space. Without stretching your arms, even the innermost items can be immediately presented to the owner with a slight turn. Fruits and vegetables can be placed on the revolving frame.
(2) Choose
Pay attention to the following points when choosing a shopping basket.
(1) The pull basket is generally tailored according to the size of the cabinet, so the size of the cabinet provided must be accurate.
(2) The welding spot of the basket should be full without virtual welding.
③ The surface of the basket should be smooth, comfortable and burr-free.
The most important thing to choose the basket is not to treat chrome plating as stainless steel.
5. Pressurization device
(1) function
Cabinet hardware accessories, in addition to the closely related slides, drawers, hinges, there are many pneumatic and hydraulic devices hardware. These accessories are produced to adapt to the ever-changing design mode of cabinets, and are mainly used for flip doors and vertical lifting doors. Some devices have three or more braking positions, which is also called "random stop".
(2) Choose
The elastic air pressure device keeps a certain distance between the cabinet panel and the cabinet body, providing strong support for the panel. The triangular fixed base makes the bracket more stable. The smooth and free bracket enables the door panel to rise vertically in parallel, and it feels light when pulled, as if there is no resistance. The cabinet with this device is very suitable for the elderly.