First, the bar design-family bar design method
1. wall-mounted bar
As the name implies, the bar is designed against the wall, and the wine cabinet or laminate can be designed for a long time. This design, whether dining room, study room or bedroom, occupies a small area, but at the same time it can accommodate relatively few people, so it is more suitable for small families.
2. Corner reinforcement
Corner strips are mainly arranged in L-shape or arc shape by using the corner of the room. This kind of bar can sit around the table, and generally can accommodate three or four people, which is convenient for chatting and suitable for the corner of the family, but it needs to consider people's mobile lines and is more suitable for spacious and open space design.
3. Parting strips
Partitions use horizontal bars to separate spaces, such as the entrance and middle of the living room, the middle of the dining room and the kitchen, and the middle of the dining room and the living room. This kind of bar is also a common design form. It can not only define two spaces, but also make the vision more transparent, which is more suitable for designing in the public area of the family.
Second, the bar design-bar design size
1. This bar is generally designed according to the open kitchen. According to the size of the space, the cabinet can be lengthened by 1-2 meters to solve the problem of pull rod. In a narrow space, a bar with a length of 1 meter is enough for two people to eat and drink, and the space can be larger and more people can sit.
2. In the main column renderings, we can see the importance of site selection. The design of poles and drainage pipes should be relatively close, and the heights of poles and tables should be determined according to the functions of poles. If you just need to drink some drinks, the width of the table required for dining is different.
3. On the seat in front of the platform, the rod itself extends to a depth of at least 40-60 cm, which is convenient for storage. If you want to set a sink or practical equipment, the selected table needs to be wear-resistant and waterproof, and artificial stone, stone and other refractory materials are ideal materials.
4. The size of the rod should be determined according to the operating space. Small space needs at least 90 cm, which is convenient to use. The height of the bar is also exquisite. Single-layer bar 1 10 cm, double-layer bar 80- 105 cm, which can be used for placing articles.
5. The operating space of the pole built in the corner needs at least 90cm, and the height of the pole has two sizes. Single-layer treaty110cm, double-layer treaty 80cm and105cm. The gap is at least 25 cm. Place the project.
Third, bar design-considerations for family bar design
1. When setting up a bar in a room, you must regard the bar as a part of a complete space, not just a piece of furniture, but a good design suitable for the bar to enter the space. There are no specific rules for the position of bar charts. Designers usually suggest using some zero distortion space. If the bar is integrated into the main space, we should consider the direction of the bar. Good design is beneficial and makes life more comfortable.
2. Of course, the location also affects the design of loop and water supply and drainage, especially when it is far from the pipeline or drainage pipe, drainage becomes a big problem. The drain pipe should have a certain inclination angle. If the pole is located near the outdoor, the drainage pipe can be connected to the outdoor and drained through a separate pipe; If the pipes are connected with each other and the inclination is insufficient, when the pipes must be installed from the ceiling or wall, the structure must be very troublesome. The cost will also increase.
The above is the design of the home bar we brought. Thank you for reading.