Current location - Recipe Complete Network - Catering industry - How to do well the safety management of cold storage
How to do well the safety management of cold storage
The safety management methods of cold storage are as follows:

In the reservoir area (including all buildings), temporary wires are not allowed to be pulled randomly, and sockets are installed illegally; Do not overload operation; Unqualified safety devices are not allowed. If necessary, it shall be reported to the safety director for approval, and the full-time electrician shall be responsible for the installation.

When the wires in the warehouse are erected, the main line should be located outside the warehouse. The wires introduced into the warehouse must be installed in flame-retardant plastic pipes, and the wires and lamp holders should be installed above the warehouse passage.

When all kinds of electrical appliances are used in platforms, Sichuan halls and warehouses after approval, they must strictly implement the safety operation rules, and conduct regular inspections and tests. It is found that sparks, short circuit, fever and poor insulation of wires may be caused. , must be repaired in time.

The stacking of articles in the warehouse must meet the requirements of fire control, and shall not occupy fire exits or block fire hydrants. The width of the main channel should be greater than 2m. The secondary passage shall be greater than 1.2M, and "five distances" shall be reserved as required; The distance between the commodity and the chandelier is not less than 0.5M