The oil fume purifier is deeply loved by many cooks and friends because of its unique oil fume purification function, and is widely used in kitchen oil fume purification. Oil fume is decomposed into oil particles, carbon dioxide and water through oil fume purification, and finally the oil particles are collected and discharged into clean air. After working for a long time, the oil fume purifier will accumulate a lot of dirt, which will lead to its poor purification effect. The oil fume purifier needs to be cleaned and maintained regularly to ensure the working efficiency and prolong the working life of the equipment. Many people may also clean the fume purifier regularly, but the working efficiency of the equipment has been declining, and the cleaning method is wrong, which of course has no effect. Here's a simple explanation for everyone by the kitchen utensils camp: the correct cleaning and maintenance methods of the lampblack purifier. 1, take out the electric field. What we want to clean is the battery in the lampblack purifier. Before taking out the battery, we must turn off the power switch of the equipment first, and then carefully take out the electric field. Water for cleaning. Prepare a water container first, and the size of the container should be able to hold the electric field. Warm water (41~51℃) is injected into the container, then caustic soda is added into the water, which is prepared according to the ratio (1: 21), and the caustic soda is gently stirred to dissolve in the water. Note that the amount of water should be able to soak the electric field. Immersion electric field. Put the electric field into the water in the container, let it soak for 21 minutes, lift the electric field every 2 minutes and lift it repeatedly until the electric field is clean. The electric field is placed on the ground. Take out the soaked electric field and lay it flat on the clean ground. Water gun flushing. Rinse the electric field directly with a water gun, and rinse the electric field clean. Washing with a water gun is because the water gun has a large impulse, which can wash away the dirt that can't be soaked and make the electric field cleaner. Dry the electric field. Put the electric field on the shelf, let the water on the electric field dry naturally, and then put the electric field back into the purifier after drying.