The location of the bar does not have specific rules to follow, designers usually recommend the use of some of the aberrant space, if the bar into the main body as a space, it is necessary to consider the direction of the line.
Good design has a guiding nature, invariably make living more comfortable.
2, of course, the location will also affect the circuit and drainage design, especially from the corner of the pipeline or drain far away, drainage becomes a major problem.
The drain should have a certain angle of inclination.
If the location of the bar is close to the outdoors, the drain can be connected to the outdoors to a separate pipeline drainage; if the pipeline must be connected to the pipeline between the pipeline and the inclination is not enough, you must install the pipe from the ceiling or the wall, the construction will be more troublesome, and the cost will follow.
3, if you want to use high power consumption appliances in the bar, such as induction cooker, it is best to design a separate circuit to avoid circuit tripping.
4, the use of corners and built into the bar, for space needs at least 90cm, and bar height has two sizes, a single bar about 110cm up and down, double bar is 80cm and 105cm, the gap between at least 25cm, the inner layer to put things.
5, the depth of the countertop must be depending on the function of the bar, only drink and dine with a different width of the countertop required, if the table in front of the preparations for seating, the countertop has to highlight the bar itself, so the depth of the countertop to reach at least 40-60cm, this width of the bar below the bar is also more convenient for storage.
6, the bar should have how much length to facilitate the use, in general, the smallest sink needs to be 60cm long, 60cm for the countertop, and the other according to their own needs can be measured.