Most hotel furniture customization is made of two or more different materials. Rattan and sawdust, rattan and bamboo, teak and straw, teak and stainless steel, all kinds of weaving techniques and fine carving are combined, which makes hotel furniture works become a handmade art. In terms of color, it is mostly dark brown, black and so on, which makes people feel calm and atmospheric.
Hotel design needs to make full use of limited space, conform to ergonomic principles and be convenient for consumers. Store designers need to master some principles of ergonomics, give consumers a good configuration scheme according to the frequency of use, the scale of goods, the way of storage and the amount of storage, and also take into account the performance of furniture materials, the utilization rate of materials, the standardization of parts and components, good visual experience and many other factors.
For example, customized cabinets usually take particleboard or medium density fiberboard as the base material, take the design of side plates as the core, and form an integral structure with the top and bottom plates. The combination of side plate, top plate and bottom plate is connected by eccentric and round bar tenon. Columns and beams may appear on the wall where cabinets are installed. From the years' working practice of Yatai Hotel furniture, we think that these beams and columns should be used as much as possible in decoration, and the storage space of cabinets should be fully utilized, leaving no sanitary dead ends.
The height of hotel furniture cabinets is generally 2400 mm, but if it exceeds 2. 1 m, a ladder is needed. Therefore, in order to facilitate the use, it is suggested to divide the cabinet into two parts, the upper layer is used for storing uncommon items such as quilts, and the lower layer is used for frequently used storage space. In addition, considering the use of space, some owners require cabinets to be top-mounted, because the height of normal units is 2800mm, while the net floor size is about 2600mm, and the height of side plates is usually 2400mm, so there is a problem of connecting plates. Considering the strength and stability, we should adopt the design of upper and lower independent cabinets, and try not to share floors.