Instant water dispenser is a high-tech intelligent innovative water dispenser. Different from traditional water dispensers, hot water can be discharged immediately without waiting and repeated heating. Generally speaking, the voltage is about 220v and the power is about 2200W. That is, the hot water boiler converts electric energy into heat energy by using a heater with strong thermal conductivity in a high-power state, and the heat energy transfers the heat to the water, and the water is heated quickly by using strong heat. The working principle of the instant drinking machine is that the control module controls the water pump to work and continuously injects cold water into the heater, and at the same time, the control module is connected with the heating power supply of the heater, so that the cold water flows through the heater and is heated at the same time, and the hot water flows out through the pipeline. When the water tank is full, the cold water tank and the open water tank are balanced. When heating, the water temperature in the boiling water tank boils to the boiling point, and the boiling water boils to the boiling water tank. At the same time, the water level of the boiling water tank is lowered, and the cold water tank is automatically replenished. This circulation ensures the continuous supply of one-time boiled fresh water without mixing raw water, heat preservation and power consumption, saving energy by 60% compared with traditional water boilers.

The unit of electric power is kilowatt/hour, and an electrical appliance with a power of 2200 watts means that the electricity consumption per hour is two kilowatts, that is, the electricity consumption per hour is 2.2 kilowatts, that is, 2.2 kWh. KW× 1h= 1 kWh, that is, 1 kW consumption per hour 1 kWh, 2200W, 2200×1h = 2.2kwh. Under the electric power of 2200 watts, the power consumption is 2.2 degrees for working for one hour and 52.8 degrees for continuous working for 24 hours.