Understand the design parameters of the incinerator: First of all, you need to understand the design parameters of the small garbage incinerator, including furnace volume, fuel type, combustion temperature, etc. In order to facilitate the subsequent measurement and calculation.
Prepare weighing tools: prepare weighing tools, such as truck scales and electronic scales, to measure the weight of garbage.
Measuring the weight of garbage: put a certain amount of garbage into the incinerator, and then measure the weight of garbage with a weighing tool.
Recording time: record the time when the garbage is put in, so as to calculate the garbage disposal amount in unit time later.
Waiting for the end of incineration: Wait for the end of garbage incineration, and then subtract the total weight of garbage from the weight of ash and residue to get the weight of burned garbage.
Calculation of rated treatment capacity: According to the measurement results, the rated treatment capacity of small waste incinerator can be obtained by dividing the weight of incineration waste by the time required for incineration.
It should be noted that the above measurement results are for reference only, because the garbage type, humidity and other factors will affect the treatment capacity of the incinerator, and the actual rated treatment capacity needs to be measured and calculated several times to get more accurate results. At the same time, attention should be paid to safety in the process of measurement and calculation to avoid personal injury and environmental pollution.