2. Features: The CHD-80 digital vegetable cutter cuts all kinds of vegetables into sections or slices, which has the characteristics of good quality, small error in cutting length, uniform slice thickness, fresh cut tissue and no damage to fiber tissue. At the same time, the machine has the advantages of high cutting efficiency, convenient operation, low energy consumption, hygiene, safety and high efficiency, and is an ideal equipment for vegetable processing industry.
1. main structure: the machine is mainly composed of frame, vegetable pressing part, vegetable conveying part, vegetable cutting part, transmission part and numerical control circuit part.
2. The main parts of this machine, such as vegetable conveying bracket, vegetable pressing part, chassis, enclosure board, frame guard board, etc. All of them are made of stainless steel, and the conveyor belt and vegetable pressing belt are made of non-toxic rubber materials to ensure that they will not rust, corrode and be non-toxic after long-term work. Harmless and so on. , in line with the requirements of food processing machinery hygiene standards.
3. Working principle: When the machine is working, the vegetables to be cut are placed on the vegetable conveyor belt, and the vegetables are conveyed to the feed inlet, and cut into pieces or slices by a high-speed cutter.
4. Transmission principle: The transmission system of this machine adopts belt transmission, gear transmission and sprocket transmission. By adjusting the numbers on the digital control panel, the rotation speed of the transmission system is changed, so as to realize the adjustment of vegetable length and cut vegetables with satisfactory length and size.
Third, the technical parameters
Production capacity: 150-3000 kg/hour
B Tool speed: 658 rpm.
C motor power: Y990-4
1. 1kw HCD 63/52 80/500 w
2. Cutting into pieces: install customized cutter head components to cut stem and leaf materials, and the block shape is 10× 10-25×25. If it is necessary to cut more than 20×20, install a spare cutter head window mask and cut with a single window.
3. Wire cutting: replace the customized 3×3-8×8 cutter head assembly with wires, strips and blocks with the length less than 30.
4. Oblique cutting: 30-45 oblique cutting can be realized by changing the installation angle between the cutter and the feed chute, which can be divided into horizontal and cutting oblique cutting.
5. Cutting length: the spindle rotates normally at 8 10, and the feed trough is driven by a 0.75kw electromagnetic speed regulating motor or frequency converter through a 1: 8.6 gearbox and pulley. When operating, you only need to turn the knob of the speedometer by hand to get the cutting length.
6. Output: 500-2000 kg/hour
7. Appearance: 1200×680× 1350, feeding trough 140× 1000.
8. Weight: 220kg