In our daily life, there are more and more places where we can come into contact with the responsibility book. Responsibility book is a tool to specify the scope and responsibility of work involving multiple departments. Presumably, many people are worried about how to formulate the responsibility book. The following is the responsibility book for safe production in the mechanical processing industry that I compiled for you, hoping to help you.
Responsibility letter for production safety in machining industry 1 1, fully responsible for the production safety of the class (group), paying special attention to stopping illegal operations.
2. When arranging class (group) work, the principle of "five simultaneities" must be implemented.
3 responsible for organizing the "three-level" education of new workers in the team.
4, organize post safety inspection, eliminate hidden dangers in time, can't eliminate, should be reported to the section for proper handling.
5, do a good job in safety team production competition.
6, do a good job in the maintenance and inspection of protective equipment, make it in good condition.
7. Supervise shift workers to learn to use labor protection articles correctly and use fire fighting, protection and other equipment correctly.
8, education team workers strictly abide by the rules and regulations of production safety and company regulations, company discipline, resolutely implement the decision of the project department.
9. Participate in the investigation and analysis of various accidents of the team.
10, carefully organize the succession work.
(1) Explain in detail the unsafe factors in the operation of this shift and the matters in the handling process.
(2) During the succession, the monitor should check with the succession monitor and sign the succession record before leaving.
1 1. Supervise and inspect the workers in this shift to work with certificates.
Signature of person in charge:
Date:
Responsibility Letter for Safety Production in Mechanical Processing Industry II. Safety Production Control Objectives
1, open flame heating is prohibited in the printing workshop of the printing factory to prevent fire.
2. Regularly check whether the wires and circuit breakers in the printing workshop are updated regularly to prevent the lines from aging and catching fire.
3. The printing workshop should be equipped with fire extinguishers in strict accordance with the regulations, and regularly check whether the fire extinguishers are complete and effective.
4, in strict accordance with the "Regulations on the Administration of Printing Industry" law-abiding business.
Second, the safety production management objectives
1, safety production work deployment. The annual work plan has clear guiding ideology, working ideas, objectives and key points of safety production; Conscientiously implement the work requirements of "Safe Production Year" and formulate practical work measures according to the annual control targets issued; Earnestly implement the annual "guarantee" responsibility system for production safety; Convene the work conference on production safety of the unit; Implement the annual work conference system. Cooperate with relevant departments to carry out major safety production publicity activities.
2, production safety supervision and management. Establish and improve the safety (production) control index system, implement the responsibility to people, sign safety production responsibility letters at different levels, and improve the assessment system; Establish and improve a comprehensive supervision system for production safety; Perform duties in accordance with the law, supervision in place.
3, production safety policy guarantee. Implement the administrative licensing system for safety production and the "three simultaneities" supervision and management system for safety facilities of construction projects; Supervise the implementation of various safety production management systems.
4, special rectification of production safety. Formulate a special rectification plan for safety production, clarify the rectification objectives and priorities, and implement work responsibilities.
5, production safety supervision and inspection. Strengthen the supervision and inspection of production safety, and timely discover and eliminate potential safety hazards; Register and file major hazards, occupational hazards and major safety hazards, and take effective measures to implement monitoring and rectification.
6, production safety publicity and education. Make publicity, education and training work plans, and organize regular study of safety laws and regulations; Organize various publicity and education activities.
7, production safety emergency rescue. Formulate emergency rescue plans for serious accidents, establish emergency rescue command systems and emergency rescue teams, improve emergency response mechanisms, do a good job in emergency rescue training, carry out emergency rescue drills, and improve emergency rescue plans.
8. Report, investigation and handling of production safety accidents. The accident report and information feedback shall be timely and accurate, and shall not be delayed, omitted or concealed; The accident treatment conforms to the principle of "four don't let go".
Three. We will impose administrative penalties on those who fail to rectify as required or fail to perform their safety production duties according to law.
Signature of person in charge:
Date:
In order to further strengthen the responsibility of production safety in our town, ensure the safety of workers' lives and property, promote the economic development of the town, and ensure the smooth implementation of production safety throughout the year, the town people's government will specifically implement the responsibility to villages and units. To this end, Xishan Town People's Government signed the "Responsibility Letter for Work Safety in xx Years" with villages and relevant units, with the specific contents as follows:
I. Responsible unit
All responsible units shall provide the following contents:
1, hazardous chemicals [hazardous chemical raw materials, refined oil, compressed gas (liquefied gas, acetylene, oxygen, hydrogen), pesticides, rodenticides, paints, etc. ];
2. Units that operate and store fireworks and firecrackers;
3. Non-coal mines (quarries, brick factories);
4. Dangerous buildings in primary and secondary schools;
5, ponds, reservoirs and other water conservancy facilities and buildings of the unemployed;
6, fire safety and production safety;
7. Pressure vessels such as boilers;
8. Public gathering places;
9. Tourist attractions;
10, road traffic safety;
1 1, other aspects of safety in production.
Second, the work objectives
No serious production safety accidents and general production liability accidents occurred, and the economic losses decreased compared with the same period last year.
Third, the target responsibility
1, in accordance with the principle of who is in charge, who is responsible, and who is responsible for the factory (field), strictly implement the grading responsibility system for safety production and the accountability system for leaders.
2, improve the safety production rules and regulations, in strict accordance with the provisions of the state and the relevant safety management regulations.
3, organize employees to carry out basic knowledge of production safety and laws and regulations training and special industry job training.
4. Each production enterprise must have a special person on duty 24 hours a day, and establish and improve the reporting system.
5. The hidden dangers of accidents shall be reported in time, and must be rectified 100% in place.
6. Insist on self-inspection once a week and report the situation in time.
7. Actively cooperate with the safety inspection organized by the higher authorities.
Fourth, others.
1, this responsibility form is made in duplicate, one for the town people's government and one for the responsible unit.
2. This responsibility letter shall come into effect as of the date of signature by both parties.
3. This Responsibility Letter will not be changed due to the replacement of the responsible person. If the responsible person is replaced, the successor will continue to perform.
Signature of person in charge:
Date:
Responsibility letter for production safety in machining industry 4 In order to ensure the realization of the company's 20xx safety control index, strengthen the main responsibility of production safety and strengthen the work of production safety in enterprises. In accordance with the Law on Work Safety, adhere to the working principle of people-oriented, safety first and prevention first, standardize the management of work safety, prevent and reduce production accidents, protect the property safety of the company and the personal safety of employees, and combine with the actual work safety, hereby sign the responsibility letter for work safety, the contents of which are as follows:
A, production safety responsibilities:
1. Seriously master the company's rules and regulations on safety production and fire control and the knowledge of safety production and fire control required by the post, improve the awareness of safety production and fire control, and enhance the ability of accident prevention and emergency handling.
2, strictly abide by the company's safety production and fire control rules and regulations, safety operation procedures, put an end to illegal operation and illegal command;
3. Adhere to the qualification recognition system for machine operators or employees who use and manage dangerous chemicals, and it is strictly forbidden to operate offside and cross-post;
4, take the initiative to carry out safety production and fire inspection, found hidden dangers of accidents or other unsafe factors, timely rectification, within the scope of their own ability to deal with hidden dangers of accidents, timely report to the superior;
5, do a good job of mechanical equipment maintenance, make it always in good condition and normal operation;
6, before work every day, especially before work on holidays, cut off the power supply of mechanical and electrical equipment in time;
7. Take care of the safety protection devices and safety protection signs in dangerous areas and parts of the machine, and do not move, dismantle or damage them at will;
8, take good care of fire equipment and fire signs, do not move, use or damage;
9. Wear necessary labor protection articles to prevent injury accidents;
10, actively implement rectification measures for hidden dangers of accidents to prevent and reduce the occurrence of various industrial accidents;
1 1, actively improve the working environment, standardize the stacking of goods, keep the safe distance of goods, and ensure smooth fire exits;
12. Enthusiastically help new employees, teach new employees safe operation methods, stop colleagues from violating regulations in time, and help colleagues in danger in time;
13. Strictly implement the smoking cessation work to ensure that you don't smoke in the factory.
Second, the company's safety production reward and assessment:
1. The company evaluates the performance of employees' safety production responsibilities and the completion of work objectives this year, and puts forward assessment opinions.
2, in the annual production safety assessment, reward excellent assessment, punish unqualified assessment.
Three. Effective date of responsibility letter:
1. This responsibility letter shall come into effect from the date of signature and shall last until 20xx65438+February 3 1 day. This responsibility book is made in duplicate, one for the company and one for the responsible person.
Signature of person in charge:
Date:
;